Nozzle stuck on hose

[Bill1234]

We have a problem. I got my hose nozzle stuck on the hose. I left the hose out all winter. I did buy a Little big shot nozzle , but how do I get the old one off. I did use boiling water and have tried wd40 and a wrench, any ideas?

[817detailer]

muscle it up nancy. jk

maybe try to use a plumbing wrench and a table clamp or manuever two wrenches together going in opposite directions.

My pressure washing quick connectors needed to be replaced about every 3-4 months and those were almost impossible to get off.

[jjj]

Ok this sounds strange. Get a metal tool something with some weight on the tip. Pair of wire snips wrench etc. tap the hell out of the parts that the hose connects up into the nozzle. Tap hard on the nozzle all the way around it. You will see debris fall out of it, but this should help. I left mine out as well and did this. Hit it pretty hard and you should be ok. It's usually caused by mineral build up.

[Bill1234]

I was able to get rid of white mineral build up and it helped alot. I might just have to go back to home depot and get a good plumbing wrench

[Bill1234]

might have to buy one of these for big mistakes like this

426 Straight Jaw Plier (http://www.channellock.com/426-Straight-Jaw-Plier.aspx)

[jjj]

U could Try using the handle of a screw driver and but a bit of babe Ruth in it.

[jjj]

Ha! I did have to pound mine like I was chipping to get out of jail, replaced washer and all was well.

[Bill1234]

I have yet to see how this nozzle I have right next to me works

[ame=http://www.youtube.com/watch?v=IG7tJXmfVk0]Little Big Shot Super Nozzle - YouTube[/video]

[jjj]

I have yet to see how this nozzle I have right next to me works

[ame=http://www.youtube.com/watch?v=IG7tJXmfVk0]Little Big Shot Super Nozzle - YouTube[/video]

Does look interesting...

[Setec Astronomy]

I have yet to see how this nozzle I have right next to me works

Did you have to order that before midnight tonight?

[Bill1234]

No, bought it today at home depot for 9 bucks, made in usa, seems solid

[Chambers]

My friend discovered this online a while ago, but we haven't been in a situation where we needed anything stronger than PB Blaster since.

Technical Penetrating Oil Showdown!!! - THE H.A.M.B. (http://www.jalopyjournal.com/forum/showthread.php?t=350800)

As a penetrating oil, a 1:1 mix of Acetone and ATF apparently loosens a bolt better than anything you can get OTC.
If you're still having issues, maybe it's worth a try!

[sasson]

I have yet to see how this nozzle I have right next to me works

Little Big Shot Super Nozzle - YouTube (http://www.youtube.com/watch?v=IG7tJXmfVk0)

Well, I am glad I bought plastic hose, because I could just cut it off and lose about 2Inch of hose.

By the way... Did you hear what that video said? "Squirting your little sister" ? Don't they see how wrong that sounds?

[Bill1234]

I have tried
boiling water
CLR
wd40
mix between all three with no luck

thoughts?

[Setec Astronomy]

Sounds like it's time for a new hose.