2010 g37x first time with a da

[tchoke]

alright time for me to show the skills I have obtained from this amazing forum :xyxthumbs:
being a first timer I did the job in 2 weekends, it didn't help that the weather was not cooperating.

products use are as follows,
this is a first time use for me for all the products except the onrww
onrww, speedy towel
griots garage DA 6" and 4"
ccs orange and ccs white pads
wolfgang twins
optiseal

starting with some before
http://i1325.photobucket.com/albums/u629/tchoke/IMG_20130309_164309_zpsed32c938.jpg

http://i1325.photobucket.com/albums/u629/tchoke/IMG_20130215_144706_zps62031f89.jpg

http://i1325.photobucket.com/albums/u629/tchoke/IMG_20130215_144710_zps1ddb50c0.jpg

http://i1325.photobucket.com/albums/u629/tchoke/IMG_20130215_144714_zps3ff6a868.jpg



http://i1325.photobucket.com/albums/u629/tchoke/IMG_20130215_144718_zpsb1d463a7.jpg

http://i1325.photobucket.com/albums/u629/tchoke/IMG_20130215_144703_zpscfa1762b.jpg

now for some after, and as usual the sun was not present as much

http://i1325.photobucket.com/albums/u629/tchoke/IMG_20130323_181010_zps7079f6d1.jpg
http://i1325.photobucket.com/albums/u629/tchoke/IMG_20130323_181014_zps1417d0f3.jpg

http://i1325.photobucket.com/albums/u629/tchoke/IMG_20130323_181024_zpsf511d943.jpg

http://i1325.photobucket.com/albums/u629/tchoke/IMG_20130323_181044_zpsd70787e1.jpg

http://i1325.photobucket.com/albums/u629/tchoke/IMG_20130323_181050_zpsadaad541.jpg

http://i1325.photobucket.com/albums/u629/tchoke/IMG_20130323_181100_zps55cc55aa.jpg

http://i1325.photobucket.com/albums/u629/tchoke/IMG_20130323_181110_zpscc12c7f2.jpg

http://i1325.photobucket.com/albums/u629/tchoke/IMG_20130323_181221_zps9199a414.jpg

http://i1325.photobucket.com/albums/u629/tchoke/IMG_20130323_181230_zps117c0e52.jpg

[akj]

Very nice!! U couldn't have done better on your first try

Sent from my SCH-L710 using AG Online

[GenesisCoupe]

What an awesome job! I am doing my car tomorrow morning, first of the year!

Btw, is claying necessary before paint correction? anyone? Feed back please

[tchoke]

thanks guys

genesis- from what I read yes, I used the speedy clay towel and was not hard at all
however from your sig 2013 car I doubt your clay picks up very much, still recommend though

[cartman57]

And that's how it's done! Great job.

Clay first to get and surface contaniments off, do the baggie test to make sure. Mike Phillips covers it very well.

[akj]

Yes its not a must do but more of a MUCH MUCH better if u do..
Today I did a 3 week old truck and you'd think it didn't need it but afterwards u could see on the clay ALOT of stuff was removed..

Sent from my SCH-L710 using AG Online

[GenesisCoupe]

thanks guys

genesis- from what I read yes, I used the speedy clay towel and was not hard at all
however from your sig 2013 car I doubt your clay picks up very much, still recommend though


And that's how it's done! Great job.

Clay first to get and surface contaniments off, do the baggie test to make sure. Mike Phillips covers it very well.


Yes its not a must do but more of a MUCH MUCH better if u do..
Today I did a 3 week old truck and you'd think it didn't need it but afterwards u could see on the clay ALOT of stuff was removed..

Sent from my SCH-L710 using AG Online

Thanks everyone!! I shall clay :dblthumb2:

[Dimetera413]

I have that exact same car in Blue Slate. I love it. Oh and great job. haha.

[Dimetera413]

Oh and I noticed you have the rust problem on the hub/rotor area just like mine. Soooo annoying.

[tchoke]

Oh and I noticed you have the rust problem on the hub/rotor area just like mine. Soooo annoying.


yes I did and was quite annoyed until I had my calipers painted
and had the "rotor hats" painted as well
I will post a picture of it tomorrow :props:

[Dimetera413]

Did you paint them yourself?

[Sicoupe]

Great job! You did awesome for your first time:)

[silverfox]

The WG twins are hands down the easiest and most consistent products I've ever used. Perfect for not only beginners but seasoned pros.

No matter what the paint, these twins perform perfectly every time. Not many products can make such a claim.

[tchoke]

Oh and I noticed you have the rust problem on the hub/rotor area just like mine. Soooo annoying.

heres the pic
had a shop do the painting for me,
just washed the car and the rotors always have that effect on them till I drive it
http://i1325.photobucket.com/albums/u629/tchoke/IMG_20130329_184450_zps25324b2f.jpg

[Dimetera413]

Looks good. I might look into that.