Newbie.. Advice on 2010 Chev Avalanche

[tbird17]

Hey looking for advice...
bought all my supplies... ready to detail a 2010 black chevy avalanche... Paint is in real good shape
1. wash & dry
2. Wolfgang Paintwork Polish Enhancer - White CCS Pad
3. Poorboy’s World Black Hole Show Glaze - Grey CCS Pad
4. Wolfgang Deep Gloss Paint Sealant 3.0 - Grey CCS Pad
5. Detailer's Max Wax Carnauba Wax - Red soft Pad

I bought a Porter Cable 7424 XP starter kit and have never used it, Im pretty excited...

I also purchased Menzerna Final Finish (FF3000) in case I have some minor swirls...

Any advice or tips are appreciated...

[Bill1234]

Make sure the pad is moved slowly on the paint , do not stay in one area and work a 4 by 4 section at a time. I would also slowly move the pad when you turn the machine off. Remember to pre spread product in the area to prevent splatter

[CM8 6MT]

Make sure the pad is moved slowly on the paint , do not stay in one area and work a 4 by 4 section at a time. I would also slowly move the pad when you turn the machine off. Remember to pre spread product in the area to prevent splatter

+1 well said