How much more?

[rlloyd]

I went with some recommendations here.
I clayed with the Speedy Prep. I really like that over clay. Removed water spots and really made it smooth.
Then I used a white pad and WG Finishing Glaze. Better but not enough.
Then - WG Finishing Glaze and Orange pad. Still better but is it enough?
Enough meaning tomorrow night I'm dropping it off for Xpel installation. The installer said it would cover up some small swirls but I don't want to take a chance and if I can get it perfect I'll do the extra steps.

Should I go with WG Total Swirl Remover with a white pad and see how that does?
I don't want to take off too much. It's a 2013 lexus, that's considered soft right?

Pictures are before and after. Unfortunately the after is in the dark with spot lights and my camera phone. The white out is an MF used for better focus.

Thanks!

[ihaveacamaro]

You won't be removing much paint at all with WG TSR and a white pad... go for it!

[rmagnus]

+1 your CC will be safe. Objective is to remove the defects. The white pad should do the trick.

[Johny B]

You won't be removing much paint at all with WG TSR and a white pad... go for it!

+1

[rlloyd]

Thanks for the hand holding!

TSR with the white, FG with white and it looks awesome!
Well as best as I can tell in with garage spot lights.

Should I follow it up with Pinnacle PCL tomorrow?

Can't wait to get the rest of the car done. And warmer weather.....