Pinnicle Series 2 Dry A Problem??? Or No??

[trhland]

WHEN WAXING MY TRUCK WITH SERIES 2 PASTE WAX ON MY QUARTER PANEL IT STARTED DRYING . IS THAT OK ?OR DO I NEED TO BRAKE UP THE PANEL IN 3 SECTIONS TO AVOID WAX DRYING? THANKS FOR ADVICE?

[Jimmie]

I don't know Tom. Got some coming so hope to get the answer with you. Hope it's wax on wax off like Souveran paste.

[trhland]

I don't know Tom. Got some coming so hope to get the answer with you. Hope it's wax on wax off like Souveran paste.LET ME TELL YOU THIS WAX IS AWESOME!! ITS A WIPE ON WIPE OFF .JUST NOT SURE IF I SHOULD BE DOING SMALLER AREAS .

[scottgt]

i do like hood and fenders and front bumper then wipe off...then door(s) and roof then wipe off...then back of the car

[wytstang]

Hand Application: 1. Apply Signature Series II by hand using a Polyfoam Wax Applicator (http://www.pinnaclewax.com/pinfoamwaxap.html) . Apply a thin, even coat to one panel at a time.
2. Signature Series II does not dry to a haze. Once you’ve covered a panel, you can immediately buff using a clean, soft microfiber towel, such as the Cobra Super-Plush Deluxe Microfiber Towel (http://www.pinnaclewax.com/cobradeluxemf.html)

[trhland]

Hand Application: 1. Apply Signature Series II by hand using a Polyfoam Wax Applicator (http://www.pinnaclewax.com/pinfoamwaxap.html). Apply a thin, even coat to one panel at a time.
2. Signature Series II does not dry to a haze. Once you’ve covered a panel, you can immediately buff using a clean, soft microfiber towel, such as the Cobra Super-Plush Deluxe Microfiber Towel (http://www.pinnaclewax.com/cobradeluxemf.html)thanks guys but is it ok if it dryes little???

[wytstang]

Sure it will just be a bit more difficult to remove that all.

[supercharged]

Sure it will just be a bit more difficult to remove that all.
:iagree:
Just try to work out of direct sunlight.