Menzerna USA PF2500 vs Menzerna Germany PF2500

[bomcar]

http://www.cleanyourcar.co.uk/images/uploads/watermarked/pf2500_1000ml.jpg
Menzerna Germany PF2500


http://ep.yimg.com/ca/I/autogeek_2245_9642855

Menzerna USA PF2500

I got a bottle PF2500 and FG400 made in german from UK.
Do you see the different cut level on the label of the bottle above ?
Are those the same product with the same cut or not ?

[pakto]

hehe, I guess yes, because the Menzerna USA say : MADE IN GERMANY , so its a label mistake.?? or are different products ?

[porta]

Just beacuse Menzerna makes great polishes they don't have to make great labels. Read the fine print on a sticker under the bottle or a very small print on the bottom of the bottle. If it says, what I believe it should, Menzerna PO203S or PO203 (the last one if the new PF for the american market) on both bottles, then you have the same product.

Nowadays is PO203S called PF2400 and RD3.02 "SIP" is called PF2300 and PO203 is called PF2500.

But as I said above. Just check out the fine print and look for the code PO203S, FG400, APO60, PO85RD3.02 or similar. If you have that code you are safe. The labels are easy to be confused by.

[SON1C]

With different cut meters you'd like to think it was a different product or we have different standards in our countries lol

[mg6045]

Its actually a different product with different cut. Dont try and compare the European lineup by the name with the USA lineup.

Like was mentioned above, you have to use the part # in the fine print on the bottom of the bottle.

This isnt new. And actually MENZ is very good at making labels., but the product names are different. Part #'s are the same.

[porta]

Its actually a different product with different cut. Dont try and compare the European lineup by the name with the USA lineup.

Like was mentioned above, you have to use the part # in the fine print on the bottom of the bottle.

This isnt new. And actually MENZ is very good at making labels., but the product names are different. Part #'s are the same.

It can be the same polish in both bottles. I have had similar labels, ie different "cut scale" but it was just Menzerna who made a different label.

But, once again, check out the fine print and you are fine.

What I do know is that Menzerna USA have started to import a different Power finish with a little less cut and more gloss then the old one. This beacuse the "old" PF (PO203S) was closer to SIP (PO85RD3.02) in terms of gloss and cut. Thats why they decided to use PO203.

[Danube]

.. everyone is telling about the fine print, but can anyone tell if the 2 polishes are the same or noT!?



/

[porta]

.. everyone is telling about the fine print, but can anyone tell if the 2 polishes are the same or noT!? /

Beacuse we can't! Im the MANIf we dont have the code who is either on 1) a sticker under the bottle or 2) on a fine print on the lower part of the bottle.

But I am almost sure that it's the same polish in the different pictures: PO203S. Nowadays the new PF who is sold in the US have the code PO203. Less cut but better gloss then PO203S.