Islander
05-02-2007, 05:26 PM
Hi All-
1st post - yep another newbie...thanx in advance for your patience. Member "JoeD" recommended the site very highly so here I am.
Have a new (Oct 06) Azera in Black. She came from the dealer with the usual swirl marks. I immediately used Meguiers 3 step products and saw some improvement on the swirls, and the shine was reflective but not as deep as I had hoped for. Since then just Meg's Gold Class a few times.
I'm going to step up and order a PC 7424. The question is what to order with it. I like the write ups on thw Klasse AIO, but I'm not as sure on the sealant. Bottom line I'm hoping to achieve 2 things. 1) AIO for swirl removing and protection. 2nd, since the Azera is black, and I've had black before I want the real deep wet look. I used to use Gliptone by hand on my '70 Mach 1 and judges seemed to like it, as I've done well in car shows (20 years ago). Since then I've become a soccer and track meet dad, so I need to get re-educated.
Some forum members have mentioned that the Klasse Sealant can be a bit difficult to work with so I was thinking of P21s on top of the AIO. Is that a good option? Or would I be better off using the Klasse sealant after the AIO, and then P21S or something like it? Recommendations please!:grouphug:
Before doing anything, I'll wash and clay the car.
I'm leaning towards the CCS pads by Lake...colors to use?
Any thoughts on a QD to use between waxing?
Thanx much, I know these are questions others have asked for their cars/ their paint colors / and their desired outcomes.
****Added 5/2/06 @ 8:12PM*****
Here are some thumbnails that you asked for...Once again, Many Thanks for your insights!
Already I've learned that I'll need to use a swirl remover prior to the AIO.
1st post - yep another newbie...thanx in advance for your patience. Member "JoeD" recommended the site very highly so here I am.
Have a new (Oct 06) Azera in Black. She came from the dealer with the usual swirl marks. I immediately used Meguiers 3 step products and saw some improvement on the swirls, and the shine was reflective but not as deep as I had hoped for. Since then just Meg's Gold Class a few times.
I'm going to step up and order a PC 7424. The question is what to order with it. I like the write ups on thw Klasse AIO, but I'm not as sure on the sealant. Bottom line I'm hoping to achieve 2 things. 1) AIO for swirl removing and protection. 2nd, since the Azera is black, and I've had black before I want the real deep wet look. I used to use Gliptone by hand on my '70 Mach 1 and judges seemed to like it, as I've done well in car shows (20 years ago). Since then I've become a soccer and track meet dad, so I need to get re-educated.
Some forum members have mentioned that the Klasse Sealant can be a bit difficult to work with so I was thinking of P21s on top of the AIO. Is that a good option? Or would I be better off using the Klasse sealant after the AIO, and then P21S or something like it? Recommendations please!:grouphug:
Before doing anything, I'll wash and clay the car.
I'm leaning towards the CCS pads by Lake...colors to use?
Any thoughts on a QD to use between waxing?
Thanx much, I know these are questions others have asked for their cars/ their paint colors / and their desired outcomes.
****Added 5/2/06 @ 8:12PM*****
Here are some thumbnails that you asked for...Once again, Many Thanks for your insights!
Already I've learned that I'll need to use a swirl remover prior to the AIO.