PDA

View Full Version : Best wheel sealant.



Pages : [1] 2 3 4 5

68bowtie
01-15-2013, 03:18 PM
I'm looking for a good sealant for my new clearcoated aluminum wheels. I'm wondering how the blackfire wheel sealant is.
thanks

mjd91
01-15-2013, 03:30 PM
I've heard good things about Rejex.
That's what I'll be putting on hopefully this weekend.

Audios S6
01-15-2013, 03:48 PM
I've used collonite 845 in the past and that has worked well as a cheaper option, I've also used DP wheel glaze but felt collonite was better. I will be switching it up to Opti-coat 2.0 topped with permanon after this winter.

I have painted wheels on both german cars.

Although not technically a sealant, I think you'll have a hard time finding something better than opti-coat + permanon, but it is going to cost you. Richy has a short video out on youtube of his wheels getting permanon (they look like chrome), and they look stunning after the application.

Dr Oldz
01-15-2013, 03:59 PM
Collinite 845 is great.
A coating such as OG is even better.

bigdriver4u
01-15-2013, 04:18 PM
Collinite 845 is a good choice. I seal mine with WG sealant before then 845 the next morning.. I noticed dirt washing off with little to no effort.

Fishincricket
01-15-2013, 05:54 PM
Collinite 845 is great.
A coating such as OG is even better.

Can you put Collinite on Chrome?

Iron400
01-15-2013, 06:15 PM
Collinite 845 is a good choice. I seal mine with WG sealant before then 845 the next morning.. I noticed dirt washing off with little to no effort.

This is my "go to" until I get mine OC'd. For all my clients, I use 845.

Circa40
01-15-2013, 06:22 PM
I like poorboy's wheel sealant.

But I have used 845 and bfwd in the past and it seems to work well

ScottB
01-15-2013, 07:10 PM
G-techniq Wheel Armor ...

Andr3wilson
01-15-2013, 07:16 PM
G-techniq Wheel Armor ...

+1 or Exo

I can tell you though, dont get CG wheel guard or DP wheel glaze.

Jrocket
01-15-2013, 07:18 PM
I use Menzerna Powerlock on my wheels and once.. just once did a light finish w/ CG Hybrid V7 but thought it was an expensive finisher that wasn't necessary.

Looks good. seems to hold up ok. but I'm sure there is something better


I'm interested to try the Chemical guys wheel guard wheel wax next though. maybe applied over the powerlock.

IID
01-15-2013, 07:18 PM
A coating such as OG is even better.


G-techniq Wheel Armor ...

:iagree:

psynx
01-15-2013, 07:36 PM
+1 or Exo

I can tell you though, dont get CG wheel guard or DP wheel glaze.

i have been eyeing CG wheel guard, why you dont recommend it?

Meticulous-Detail
01-15-2013, 07:44 PM
I use Collonite 476s and have had good success.

ihaveacamaro
01-15-2013, 07:46 PM
I'm surprised no one has said Blackfire Crystal Seal yet.

It is just amazingly simple to use. Spray on, wipe to level, walk away.