DRT BRD
01-02-2013, 11:57 AM
This client was referred to me by the other black Viper I completed not long ago. He had a major stripe issue where a previous detailer ran his buffer over them and it discolored them severely. The car is black with flat black stripes so it almost "brightened up" a few spots making it noticeable. They had a lot of water spotting on them but Meguiars M40 cleaned those up no problem but didn't take care of the discoloration. He plans on still replacing them.
This detail was fairly simple, ONR wash, decon, and a "one step" light correction/protection (two passes). Perfection was not on the agenda today but simply to remove a fair amount of swirling, enhance the shine, and protect the finish. And here we go.
Exterior:
ONR with a ton of CG MF's.
Speedy Prep towel fine
Wheels/barrels were hit with ONR and wheel specific black MF towels to ensure no marring
Wheel wells and rubber were hit with APC 5:1 & various brushes
Tires dressed with Show Room FX White Pearl
Rubber seals on doors/headlights/tailights treated with M40
CarPro Eraser
Meguiars M40
Wells treated with CG Bare Bones
D300 Meguiars MF Cutting Disc
D301 Meguiars MF Polishing Disc
Interior:
Vacuumed
Dry brushed
Vacuumed once more
Interior panels cleaned with Meguiars QID
Glass treated with Meguiars Perfect Clarity and Buff & Shine glass towels
The tools on the agenda today. ORIGINAL PC and Griot's 3" DA.
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/534244_389451414480995_41408957_n.jpg
The finish had tons of random strikes. The MF/D300 took care of those with ease.
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/165824_389451811147622_1329042959_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/644257_389451454480991_2113367889_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/734670_389451504480986_1636246454_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/541697_389451754480961_1649466593_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/553323_389451784480958_296446451_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/294066_389451607814309_1319143088_n.jpg
I was sad to hear another local detailer who I know left this like this.
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/531348_389446261148177_2066167058_n.jpg
CarPro Eraser took care of that no problem.
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/551724_389445647814905_1782201081_n.jpg
TAPE MONSTER:
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/541936_388971947862275_1430772225_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/379390_388972041195599_209173086_n.jpg
And now the afters. Again, perfection isn't what we were focused on here for this detail.
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/546302_389447761148027_757659915_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-snc7/2047_389450961147707_1661770808_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-snc6/268068_389450994481037_1903101549_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-snc7/307604_389451141147689_308747540_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/184452_389451214481015_2126019165_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/734850_389443764481760_1833378733_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/184494_389443894481747_600199678_n.jpg
Here you can see where the previous detailer taped the striping but struck it enough to leave some markings.
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/483907_389442901148513_1594190111_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-snc6/268045_389443567815113_1860496236_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/541881_389443531148450_1457926566_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/68984_389443937815076_661445278_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/479936_389444187815051_250200969_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/73644_389443807815089_1031477975_n.jpg
Questions/Comments always welcome.
Thanks for checking it out!
This detail was fairly simple, ONR wash, decon, and a "one step" light correction/protection (two passes). Perfection was not on the agenda today but simply to remove a fair amount of swirling, enhance the shine, and protect the finish. And here we go.
Exterior:
ONR with a ton of CG MF's.
Speedy Prep towel fine
Wheels/barrels were hit with ONR and wheel specific black MF towels to ensure no marring
Wheel wells and rubber were hit with APC 5:1 & various brushes
Tires dressed with Show Room FX White Pearl
Rubber seals on doors/headlights/tailights treated with M40
CarPro Eraser
Meguiars M40
Wells treated with CG Bare Bones
D300 Meguiars MF Cutting Disc
D301 Meguiars MF Polishing Disc
Interior:
Vacuumed
Dry brushed
Vacuumed once more
Interior panels cleaned with Meguiars QID
Glass treated with Meguiars Perfect Clarity and Buff & Shine glass towels
The tools on the agenda today. ORIGINAL PC and Griot's 3" DA.
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/534244_389451414480995_41408957_n.jpg
The finish had tons of random strikes. The MF/D300 took care of those with ease.
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/165824_389451811147622_1329042959_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/644257_389451454480991_2113367889_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/734670_389451504480986_1636246454_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/541697_389451754480961_1649466593_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/553323_389451784480958_296446451_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/294066_389451607814309_1319143088_n.jpg
I was sad to hear another local detailer who I know left this like this.
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/531348_389446261148177_2066167058_n.jpg
CarPro Eraser took care of that no problem.
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/551724_389445647814905_1782201081_n.jpg
TAPE MONSTER:
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/541936_388971947862275_1430772225_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/379390_388972041195599_209173086_n.jpg
And now the afters. Again, perfection isn't what we were focused on here for this detail.
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/546302_389447761148027_757659915_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-snc7/2047_389450961147707_1661770808_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-snc6/268068_389450994481037_1903101549_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-snc7/307604_389451141147689_308747540_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/184452_389451214481015_2126019165_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/734850_389443764481760_1833378733_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/184494_389443894481747_600199678_n.jpg
Here you can see where the previous detailer taped the striping but struck it enough to leave some markings.
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/483907_389442901148513_1594190111_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-snc6/268045_389443567815113_1860496236_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/541881_389443531148450_1457926566_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/68984_389443937815076_661445278_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/479936_389444187815051_250200969_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/73644_389443807815089_1031477975_n.jpg
Questions/Comments always welcome.
Thanks for checking it out!