Shayne
05-23-2006, 11:40 AM
I am going to do my white Stang with the PC 7424 next week after a holiday road trip. I got the PC from autogeek in a kit and have used it on my DD from step one, but not on the Stang (weekend/rec vert). My question is am I doing the steps correctly? And any advice? I have all Mirror Glaze products from autogeek. I clayed the car in Feb. this year, then did all my steps below. Here are my steps.
1-wash (gold class shampoo/conditioner)
2-clay
3-meguiars paint cleaner (#2 or deep crystal applied w/ PC taken off by hand)
4-meguiars (#7 or machine glaze applied & removed as above)
5-meguiars (poly sealant or nxt gen sealant apllied/removed as above)
6-meguiars #26 yellow wax after sealant has cured (next day or next wash)
I have plenty of these products so I need to use what I have. After reading on this forum, I am going to try other products as these run out.
Also, I really like this site. Thanks for all the helpful info. Sorry for long post.
1-wash (gold class shampoo/conditioner)
2-clay
3-meguiars paint cleaner (#2 or deep crystal applied w/ PC taken off by hand)
4-meguiars (#7 or machine glaze applied & removed as above)
5-meguiars (poly sealant or nxt gen sealant apllied/removed as above)
6-meguiars #26 yellow wax after sealant has cured (next day or next wash)
I have plenty of these products so I need to use what I have. After reading on this forum, I am going to try other products as these run out.
Also, I really like this site. Thanks for all the helpful info. Sorry for long post.