Klasse SG vs 845 on wheels

[JonnyB]

Normally I would just experiment with waxes but both of these are a pain to remove. I only do this as a hobby so I need experience from more seasoned detailers.

While durability is important I'm more after looks. Wheels are polished factory cleared. Would Klasse SG with 3-5 coats give a better hard shine vs 845?

Thanks

[Finemess]

Never tried SG, but 845 is awesome on wheels. I have some sealant samples I'm going to try on wheels soon.

[rddmxmeth10]

I asked a similar question in my thread http://www.autogeekonline.net/forum/auto-detailing-101/58070-rim-care.html

Most are saying to Opti Coat, but I am going to give GTechniq a go and see what happens.

[Qusai]

Put one..or at the most 2 coats of anything on your wheels..you must love to wax..i have one layer of menz power lock on my rims and they can't get any better than that from an lsp

[andrew b]

I used KSG on my wheels since I had about 1/3 bottle and it wasn't getting any love....

Then I remembered a thread from way back when Klasse was one of the only sealants around, and there was talk about using it as a QD. So I decided to try using the KSG diluted as a final wipe for the wheels after a wash.

These threads tell the story, and for your convenience a quick video I made showing results of using KSG (applying and then using diluted solution as a drying/retreat).

Old Product, New Trick (http://www.autogeekonline.net/forum/tricks-tips-techniques/41495-old-product-new-trick.html)

Old product, New Trick part II (http://www.autogeekonline.net/forum/tricks-tips-techniques/41910-old-product-new-trick-part-ii.html)

Rinse-clean BMW wheels - YouTube (http://youtu.be/OhUSQaSZm-s)