Dream Detail - Porsche Cayman S: Gtechniq C1 + EXO

[TrKent]

Hi everyone, here are a few pictures from a Cayman S I am finishing up tomorrow. Not the best selection but there will be a video to accompany them tomorrow evening.

http://farm9.staticflickr.com/8202/8215052441_4db75b1d8a_b.jpg

Lots of iron, it eventually pooled up in the letters (shown in the video)
http://farm9.staticflickr.com/8483/8215953496_cdf91cef2d_b.jpg

http://farm9.staticflickr.com/8063/8215953856_fa29a67368_b.jpg

the speedy surface prep towel is awesome!!
http://farm9.staticflickr.com/8070/8215954192_455243558c_b.jpg

Final rinse, it was getting pretty cold out
http://farm9.staticflickr.com/8483/8214870551_439264ae49_b.jpg

http://farm9.staticflickr.com/8061/8214871435_5e09035d54_b.jpg

http://farm9.staticflickr.com/8337/8214871723_2b6cea1751_b.jpg

clear film removal with heat gun
http://farm9.staticflickr.com/8208/8214872059_f5e2f12c72_b.jpg

most of the film had yellowed pretty bad
http://farm9.staticflickr.com/8070/8215956774_44e1232464_b.jpg

after correction, before finishing
http://farm9.staticflickr.com/8338/8214873661_ab5414ceed_b.jpg

view outside after correction stage, still needs finishing
http://farm9.staticflickr.com/8478/8214873945_36de7782d3_b.jpg

decent reflection from silver
http://farm9.staticflickr.com/8477/8215958286_f25a1ab1b2_b.jpg

http://farm9.staticflickr.com/8203/8215958738_f316ca8871_b.jpg

C4 used on trim. I1 used on carpet
http://farm9.staticflickr.com/8198/8214875463_e1fe47ddb6_b.jpg

Fully restored
http://farm9.staticflickr.com/8345/8215960096_0609483407_b.jpg

C1 was applied today, EXO application tomorrow

[bigbadbp7]

Awesome JOB! I really like how the C4 looks on the plastic, looks like that will be going into my cart next. Cannot wait to see the EXO!

[billmac]

:iagree:

[cartman57]

Nice 50/50 shot with the C4 on the trunk liner.

[VP Mark]

Very nice job, especially on the trim.

[TrKent]

Thanks everyone!!

here are some more photos, video coming soon!!

dirty wheel
http://farm9.staticflickr.com/8064/8218392393_4b643ce467_b.jpg

http://farm9.staticflickr.com/8490/8218393201_2868b548a2_b.jpg

http://farm9.staticflickr.com/8202/8218393953_c69889c4b9_b.jpg

http://farm9.staticflickr.com/8490/8219475318_8fcb63c1e1_b.jpg

IronX
http://farm9.staticflickr.com/8208/8218395063_8e47f89d5d_b.jpg

http://farm9.staticflickr.com/8205/8219476532_3c40747693_b.jpg

http://farm9.staticflickr.com/8059/8218396549_d2036eb125_b.jpg

after C5 on the wheels and calipers
http://farm9.staticflickr.com/8337/8218398641_024c0e7ac6_b.jpg

a little bit of post-processing
http://farm9.staticflickr.com/8478/8218397553_f40b9a67f8_b.jpg

http://farm9.staticflickr.com/8349/8218398085_c07cc7fe58_b.jpg

all done
http://farm9.staticflickr.com/8068/8218399139_9b3e78b3b9_b.jpg

[TrKent]

Dream Detail - Porsche Cayman S with EXO - YouTube (http://youtu.be/dqX1GTL36Xo)

[TrKent]

idk why the embedding doesn't always work....

[ame=http://www.youtube.com/watch?v=dqX1GTL36Xo]Dream Detail - Porsche Cayman S with EXO - YouTube[/video]

[TrKent]

:bump::bump2:

[Ryry11]

Awesome work with awesome products tr, car looks incredible

[TrKent]

Awesome work with awesome products tr, car looks incredible

thank you!

[Chris's FX4]

Always look forward to your videos and pics.:props:

... oh, and the detailing work too.:D

[TrKent]

Always look forward to your videos and pics.:props:

... oh, and the detailing work too.:D

Thanks Chris! Things have really started to pick up since I formed the LLC. 3 Mustangs in queue, a Harley Fat Boy and maybe even a V-Rod!

Transmitted from the Dream Detail studio.

[RMM]

Nice work! :dblthumb2:
I see you are already putting some miles on those Rupes: early thoughts? When is the review coming out? :props:

[TrKent]

Nice work! :dblthumb2:
I see you are already putting some miles on those Rupes: early thoughts? When is the review coming out? :props:

Thank you! Early thoughts are great, this car came in right at the estimated 25 hours. Without the Rupes it would have been closer to 30 hours. The Rupes paired with MF pads is amazing! quick cut and finish, I almost didn't need to go through with a finishing stage. This is Porsche paint so it was soft to begin with. The hydro-tech pads didn't do so well with the Rupes. There was a lot more vibration than I would have liked but still gave a desired finish. I will probably wait to post a review until I get the rest of the Rupes pads and polishes (and the 15e as well) which I still don't have an ETA on. I have the rest of the Rupes pads (just need yellow and white for the 21e, which are the most important lol). With the Rupes polishing liquids, I am also getting a 6mm orbit Skorpio sander. I have been in contact with two people about getting them but still nothing so far. :bat: