PDA

View Full Version : Headlights



DiPaoro
11-23-2012, 08:31 PM
I recently notices my headlights are a bit cloudy.

Can I use m105 or m205 with 4 inch CCS orange or less cut pad to restore?

To seal, can I apply WG 3.O?

Trying to avoid buying yet another kit.

Dougw4355
11-23-2012, 08:48 PM
Maybe this link will help

http://www.autogeekonline.net/forum/show-n-shine/19021-headlight-restoration-new-uv-sealant-idea.html?highlight=headlight+restoration

Vegas Transplant
11-23-2012, 09:08 PM
There's a lot of different methods. Some better than others.
Perfect chance for a DiPaoro review, and, or comparison.
Whadda you have to lose? :props:

Colinpd137
11-23-2012, 09:21 PM
I Just ordered the diamondite kit (bigger one) and doing a review when it gets here so hopefully it'll still be useful information to yah by that time ;)

Sent from my HTC Incredible 2 using AG Online

baknforth101
11-23-2012, 11:18 PM
i think you will have good luck with the combo you asked about. but without seeing it , its kind of hard to say for sure. i usually sand with 2000 first then hit with a heavy compound and then polish and it works very well. sometimes i guess sanding may not be required but i do it anyway just to be sure. but 105 should have enough grit to get decent results if they arent too hazy.