Scratch repair on bumper

[Ncs0816]

Is there a way to fix this

I got some bindi to fill the whole and then I was going to use touch up paint and a primer and then put a layer of lacquer on top.

Am I going about right?

[kemefk]

do you have pictures?

[Ncs0816]

Yes14153

[Ncs0816]

It's about 1-2mm deep

The scratch

[Ncs0816]

I just filled it with a bondo

14154

[kemefk]

It seems to me it looks like clear coat failure. I don't see the scratch unless my eyes are goin bad.

[kemefk]

Okay...so if you have a serious dent that you can't pop out, Bondo is definitely a good option. After your done shaping it, you can prime it, paint it and then clear it. If you just have a thin scratch though, Bondo is really not necessary. You can just fill the scratch with touch-up paint until you completely fill the scratch and then sand it down to level it and then compound it and polish it. Hope that helps.

[Ncs0816]

Ok

[Ncs0816]

Its a wide scratch.

[Ncs0816]

Ok I just put a fresh coat of paint on it14156

[Ncs0816]

Anyone can help with rust on car decal emblem

My accord emblem has rust

14163

[Bill1234]

Ncs, try rubbing the emblem with mineral spirits

[Ncs0816]

Don't have any?

[rmagnus]

Anyone can help with rust on car decal emblem

My accord emblem has rust

14163

Krud Kutter 8 oz. Rust Remover and Inhibitor at Home Depot. Use 000 steel wool and rub the rust off. I used it in a set of chrome olympic weights worked like a charm.

[Ncs0816]

Thanks. Your the man. Thanks everyone for the gas replies