best pads for m105

[s500]

what are the best pads for m105 on the pc7424xp. i have used the orange ccs pad and the optimum mf pad.any suggestions on better pads.thanks

[Mike Phillips]

what are the best pads for m105 on the pc7424xp. i have used the orange ccs pad and the optimum mf pad.any suggestions on better pads.thanks


What are you trying to do?
What are you working on?


:)

[s500]

What are you trying to do?
What are you working on?


:)

my 2000 mustang and trying to remove some of the deep swirls and scratches.

[SON1C]

then this should interest you :xyxthumbs: 03 mustang
http://www.autogeekonline.net/forum/show-n-shine/53796-son1c-blue-paint-correction-40-hours-invested-enjoy.html

[s500]

then this should interest you :xyxthumbs: 03 mustang
http://www.autogeekonline.net/forum/show-n-shine/53796-son1c-blue-paint-correction-40-hours-invested-enjoy.html

beautiful car and thanks for the comment. unfortunately i have a v6 that i brought over the summer and my friend purchased one right after. i was looking into the gt but my budget wasnt enough. sad to say i am not absolutely in love with the cars handling. the rear end likes to play alot. is that the same with your gt or not considering your weighs more than mine and may have a different weight distribution.

[SON1C]

no worries I don't hate on the sixers!
an easy cheap mod which is one of the differences in our cars is that the gt came stock with a rear sway bar to help rear end play whereas yours doesn't have that

other suspension mods that would greatly help..
lowering springs
flsfc
new shocks and struts
those are the great basics to start with

but I achieved great results with 105 and the cyan hydrotechs

[lokerola]

I've successfully used Lake County CCS Orange pads on a few cars to remove swirls and scratches. Followed up of course with M205 on CCS white pads. Topped with Collinite 845 by hand.

[s500]

no worries I don't hate on the sixers!
an easy cheap mod which is one of the differences in our cars is that the gt came stock with a rear sway bar to help rear end play whereas yours doesn't have that

other suspension mods that would greatly help..
lowering springs
flsfc
new shocks and struts
those are the great basics to start with

but I achieved great results with 105 and the cyan hydrotechs

thanks for the comment, my car has lowering springs i will look into the sway bar.thanks again

[Mike@DedicatedPerfection]

I achieved great results with 105 and the cyan hydrotechs

Same here. The Cyans work really well with M105

[Wheelzntoys]

Yellow LC flat pad

[TOFAST4U2C]

Has anyone tried the LC microfibers with M105?

[tuscarora dave]

Has anyone tried the LC microfibers with M105?
I just did a ceramiclear Mercedes with the LC UltraFiber pads and 105. Near the end of the job I switched to Meg's MF cutting disk and the Megs actually cuts better with 105 than the LC do. I think it has something to do with the longer nap of the Meg's microfiber, however the LC pads definitely last longer than the Meg's do.

Cut slower and destroy fewer pads or cut faster and destroy more pads... 6 of one, half dozen of the other...:dunno: