Hammered 2011 (Yes Hammered Already!) LR4 Rover - Polished and Opti-Coated

[Wills.WindowsAndWheels]

Operation Paint Polish/Restore & Opti-Coat.

Subject: 2011 LR4 Rover

Color: Metallic Black

Condition: What do you think?

Process: Extensively clean, decontaminate, 2-step polish (compound/finial polish), Re-Wash, IPA Wipe-Down, Apply Opti-Coat to all paint, glass (except front windshield), hard plastic trim, lights and rims.


24 hours....yup...24 hours...thats how many man/woman hours Dani and I put into this one..and the next day we'd be dropping another 20+ hours into this Panamera: http://www.autopia.org/forum/click-brag/141068-black-2010-porsche-panamera-correction-engine-interior-our-first-200k-car.html

BUT, thats another write up (feel free to check it out).

Point being, we had a long weekend lol....here's what we were working with:



http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1020993-1.jpg


Here she is, and yup, she's black (of course)! I've never been a big fan of Rovers but gotta say this one was pretty sweet especially once you got up on it. For now however, it was dirty, real dirty...covered in bugs and brake dust. It had been hit by one of our Arizona Dust storms that many of you I'm sure have seen on the news:

[ame=http://www.youtube.com/watch?v=8W4Cx44XKZ4]Phoenix Dust Storm: Video of Doomsday Scenes in Arizona - YouTube[/video]

Check the link...no its not the end of the world, but it damn sure does look like it.

You add a little bit of rain to that..not enough to actually rinse the dust off...but enough to muddy it up...well, here's what ya get:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1020994.jpg

Thats right folks, welcome to Arizona! A 50 mile wide dust storm, add a pinch of rain and let bake in 113 degree weather and you have what you see above!

The whole ride looked like that:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030003.jpg

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030004.jpg

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030001.jpg



The rims were covered in brake dust as well. BMW's, new Camaros, Vettes...seems like big power = big brake dust...guess you gotta stop these things some how!

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1020995.jpg


Closer?

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1020999.jpg


Yum yum right?


Oh and yeah, there were bugs:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030002.jpg


BUT, it's ok....we come prepared. We haven't dropped tons of money into all of these tools and supplies we have just so they can sit and look pretty. Oh no, they have to work just like we have to work. So first was cleaning up those nasty rims and tires...they took a good amount of time but...came out beautifully:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030008.jpg


Stupid bug had to get in there and ruin my picture...


And as for the body of the vehicle, it was pressure washed to get rid of the bulk of the dirt..and then it was time to foam her up:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030010.jpg



More please...

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030011.jpg


Snowing in Arizona:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030012.jpg

I'm tall but hey, even i need a little help on these big guys:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030013.jpg


My sister and i then circled around hand washing it...having to re-foam a couple of times...because even though it was early morning...it was still already in the 90's...so we had to keep the paint wet while we washed...this takes more coordination than you'd think but...we pull it off. Next we rinsed it, pulled it in the garage and dried it off. While the pressure washing and foaming took care of most of the grime...there are still some tight spots that need to be addressed directly:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030014.jpg

The front had been covered in bugs...and they got all up in the grille area...had to use some ONR and a microfiber to clean each small hole one at a time...but hey, ya do what ya gotta do right?



Now i know what you're all wondering...what did the paint look like under all that dirt? Well...it looks about as bad as you'd expect, super swirls.

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1020992.jpg

Our Halogens really lit these bad boys up:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030015.jpg


http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030016.jpg


There were not only 1000's of them but they were deep too:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030018.jpg


http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030020.jpg



Maybe millions????

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030021.jpg


http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030023.jpg


Doesn't matter...millions of swirls vs. Windows & Wheels....2 of us working hard core non stop (literally we didn't even stop for lunch or bathroom break in 12 hours...we were SERIOUS people), I'd put my money on us...


The hood was exceptionally messed up:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030024.jpg


Near door handle:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030026.jpg


http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030027.jpg


Wow! Wow wow wow!

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030029.jpg



Front Quarter Panel:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030030.jpg


Rear Hatch:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030033.jpg

Gas Chamber:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030035.jpg



Lets be clear, this was not just swirled..this car was infested with these things! In direct sun light it of course was no better:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030036.jpg

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030037.jpg

[Wills.WindowsAndWheels]

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030039.jpg


http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030040.jpg



So next we clayed it, finally got the paint to stop making noise when we'd run a towel over it. Then we broke out the polishers, pads and product. This was an Optimum day, Optimum Hyper-Compound, then followed up with Hyper-Polish, then the car was washed with Optimum No Rinse and finally had Optimum Opti-Coat applied. Wow, i sound like a commercial lol. Ok but seriously...this was our first crack at using Hyper-Compound & Polish. We had our old stand by with us too, Meguiars 105, D300 and 205 polish JUST incase...but gotta say the Optimum duo did the job.

We taped off the hood and compound ...and then polished on one side of the tape...we left the other side as it was before (washed and clayed but no polishing done).

Heres what we got:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030042.jpg


Boo-yah! Yes, the metallic paint shines again! This was after IPA wipe downs so, no fillers in this paint, this was true correction.

Out in the sun she looked just as stunning on one side....and equally as hideous on the other:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030043.jpg



Close up shot of the finished side:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030046.jpg


Yeah, we couldn't believe this was the same paint...


One more 50/50 shot...the un-done side is INSANELY hazy...it actually has a grey hue to it...the finished side though...well, you know whats up:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030049.jpg


Seeing this is always inspirational...this is why we do what we do. Time, sweat and fatigue aside, this kinda stuff keeps us going. The only problem was well, we had about 9 acres of paint left to polish!



One thing the owner questioned me about was the wavy look of the paint (this was during the time we bid the ride).

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030053.jpg


I explained to him that this was orange peel...unfortunately even extremely expensive SUV's like this still come from the factory with orange peel due to them being machine painted and not sanded down properly. There was even a very small run in one spot:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030065.jpg


Unfortunately, nothing we could do...thought i AM looking forward to trying out the new Orange Peel Removal Pads sold by Corey at CarPro-Us.com To be able to remove orange peel without sanding would be a HUGE advancement in paint correction, you can bet we'll be trying these out soon.

Where my 5" pads were able to cut almost every swirl/scratch i came across, some were rather deep:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030052.jpg

Ones like these i broke out my 3" pad and focused directly on a particular scratch. Yes it takes extra time to just focus on a small area but, to us, its well worth it...and surely paid off:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030054.jpg



While i marched on doing the compounding, my sister was steadily staying behind me polishing the paint up to a super high gloss:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030055.jpg
http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030056.jpg




Look, another one of my beloved RIDS (Random Individual Deep Scratch):

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030058.jpg

Back to the 3" pad and:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030060.jpg


As you can see the paint is slightly hazy. Using smaller pads up's the amount of cut so the polishing step is VERY important to be sure no haze/marring is left over.


Now while i was loving how Hyper-Compound was cutting and equally loved how Hyper-Polish finished the paint up...one thing we did notice is that the claim of 'No Dusting" well...just isn't really true lol:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030063.jpg


Lets face it...compounds are composed of particles that are needed to cut the paint, once the liquid dries up and only the particles left, dust happens, until some super genius comes up with some way to get around it. Until then, you just live with it. While it was a little annoying, we didn't really care because the paint was coming out awesome.

Here i am about to start compounding behind the rear door:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030064.jpg


The passenger side was nice and glossy after we both finished, we still had a long ways to go but, it sure looked promising:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030069.jpg



Now back to our regularly scheduled programing:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030070.jpg

Small pads are essential for reaching into tight areas, like underneath the emblems on the back hatch:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030071.jpg


It was starting to get a bit dark but we were still working..our LED light really showed what the paint was looking like, still much work to be done:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030074.jpg


LED lights, its a love hate relationship...they show EVERYTHING:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030075.jpg


We finally came to the point of being done with the polishing. Luckily 80% of the roof was glass...no major swirl correction needed there...but it did all have to be opti-coated...and washed.

The awesome part about doing an ONR wash after using optimum polishes is that it is suppose to remove all polishing oils that may be left on the paint. The other great part is washing with ONR is pretty easy and much less chance of accidentally leaving water spots from a typical wash...dont wanna Opti-Coat over those.

My sis attacked the rims with Opti-Coat while i started on the paint. After she finished, she did the lights and trim and then dressed the tires (carefully, making sure to not get anything on coated rims since the coating was fresh) and wells.

After finishing...it was well past dark...about 9 p.m at this point, but even in the garage it looked awesome:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030076.jpg


No swirls on this paint:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030080.jpg

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030083.jpg

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030086.jpg

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030088.jpg

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030094.jpg

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030095.jpg



Ready to rest in the garage for the rest of the night:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030089.jpg

[Wills.WindowsAndWheels]

The rims, well they looked AWESOME:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030090.jpg

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030091.jpg


Sweet reflection:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030098.jpg

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030101.jpg



Yes, all was well in the world again:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030697.jpg


Wait, what the hell is that?

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030698.jpg

What, no no no, thats not how this works...stop it...this is a story with a happy ending...stop


http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030699.jpg


Noooooooooooooooo!!!!!!!

Good God, wake up...bad dream, must stop the bad dream!

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030700.jpg

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030701.jpg

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030703.jpg

Well at least there were no bird droppings:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030702.jpg

Crap! (Literally!)



Well what happened here was, the owners and their family took a couple of trips since we had last seen them...from Az to Nevada...and then to Rocky Point! Yeahhhhh that'll do some damage! It had been exactly a month since we had finished it...and then they brought it back to us for a maintenance wash and THAT was what we were looking at! Talk about re-living a nightmare!

Fortunately something was a BIT different this time:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030704.jpg


Oh yeah, it had been Opti-Coated. Mhm, the beading was awesome, on THAT dirty hood...the water still beaded up and sheeted right off.

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030705.jpg

We haven't even washed it yet, just rinsed!


The other awesome part about Opti-Coat, you can hit those bugs with a little APC to loosen them up and then they wash right off...and unlike wax or sealants, the APC won't wear down the Opti-Coat.

After washing well, she was back to new again:


http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030706.jpg


http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030707.jpg

I forgot to add that we used Opti-Bond on the wheel wells...which has made them extremely easy to clean.

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030708.jpg


Wheels were back to how they should be:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030709.jpg
http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030710.jpg

I'd say 80% of the brake dust just rinsed off...the other 20% came off with us just spraying a little APC and agitating with a brush....

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030711.jpg


No, i didn't just take a pic of a trash can...thats the reflection :)


See!

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030712.jpg

Still swirl free after a month:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030715.jpg

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030716.jpg


Finally, a full sun beauty shot:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030718.jpg

Along with a few others:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030719.jpg

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030720.jpg

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030724.jpg

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030726.jpg

Finished:

http://i1232.photobucket.com/albums/ff374/Wills_WindowsAndWheels/Ignacios%20Land%20Rover%20LR4/P1030730.jpg



So there you have it. We've been doing bi-weekly maintenance washes on this ride for the last 4 months or so...and thus far the water beads and sheets just as well as it did after the first wash.

Hope you all enjoyed the write up, the pictures and the review on Opti-Coat.

Thanks for reading.

[SR99]

Nice work! Appreciate your photodocumenting effort too.

re: Orange peel removal pad, if you do try that out let us know what you think

PS nice website you've got there.

[oldmodman]

Wonderful work!

I'm sure your client likes the way his Land Rover looks.

Still looks great after your first few trips back to refresh it.

[dcjredline]

Nice days work man!!

[Smurf]

Top wright up, top polish job, what more can I say. Top marks to the both of you for the passion you put into your work :dblthumb2::dblthumb2::dblthumb2:

I had done one the same about a month ago and it took me all weekend to get through it .

[hoyt66]

Excellent write up and great job. I always enjoy your posts on full correction details. You and your sister make an awesome team! Is that your garage or customers?

[Circa40]

Awesome work!!

[EddieF]

Awesome!!!

[FastZR1]

Excellent work... and awesome documentation of your process. Love all the pictures. Thanks for taking the time to post this.

[vet]

Fantastic!

[Mike@DedicatedPerfection]

That was an extensive post. I enjoyed it over my cup of coffee.

Great work. Were you using the spray compound and polish?? Have been thinking of trying them out and see how they do compared to M105/M205.

[Wills.WindowsAndWheels]

Nice work! Appreciate your photodocumenting effort too.

re: Orange peel removal pad, if you do try that out let us know what you think

PS nice website you've got there.

Glad to see you guys still take time to read through all my writing and check out all the photos :dblthumb2: Hope it helps someone along the lines or at least gives someone some insight as to the potential their ride has if done correctly by someone who knows what they're doing.

I'll definitely do a write-up when i try the orange peel removal pads. They're suppose to be quite aggressive but, i have just the test dummy for them lol. While i don't think i'll be aiming to get EVERY inch of the SUV i'm going to try them out on into perfect peel free condition, i do want the majority of it to be much better than it is now.

Also, glad you like the site. Just had it re-done...took a bit longer than i wanted, and some of it i ended up having to go in and do on my own...i guess I'm sort of a hands on freak when it comes to things...but i think it turned out decently, thank you for the feed back. :dblthumb2:


Wonderful work!

I'm sure your client likes the way his Land Rover looks.

Still looks great after your first few trips back to refresh it.

Yeah they're definitely enjoying it. We also did the interior but it wasn't any drastic turn around, more vacuuming than anything. The first 3 or 4 washes we did on it, it was a sand pit lol...but the exterior cleaned up way faster than it normally would have..and i swear being able to use something like Megs APC 4:1 on bugs on the grille, and NOT having to worry about stripping away the coating, is a dream.


Nice days work man!!

Thank you :)


Top wright up, top polish job, what more can I say. Top marks to the both of you for the passion you put into your work :dblthumb2::dblthumb2::dblthumb2:

I had done one the same about a month ago and it took me all weekend to get through it .

Those things are seriously a lot of work once you start on them aren't they? The prep work along on this thing just to get all the dirty and brake dust etc off took a good amount of time and the polishing of course was very time consuming, especially when you know you're going to be putting a permanent coating on afterwards...really wanna make sure every inch is in grade A shape :xyxthumbs:

[Wills.WindowsAndWheels]

Excellent write up and great job. I always enjoy your posts on full correction details. You and your sister make an awesome team! Is that your garage or customers?

Glad to have you follow my write up's...really does feel good to know you guys enjoy them...sorry I'm a bit behind..i actually need to post my Ferrari 458 Italia write up over here...i have it on Autopia but forgot to post over here as well, i'll do that soon.

The garage was the customers...man i wish we had a garage of our own to work in...would be so fun to organize and set something up completely around our work flow...from lighting to tool placement, storage, chemical line up...yeah what a DREAM that would be...but we don't make that kinda $ yet lol...maybe some day...or maybe a client will invest in us!


Awesome work!!


Awesome!!!

Thank you!


Excellent work... and awesome documentation of your process. Love all the pictures. Thanks for taking the time to post this.

Was my pleasure and seriously thank you for taking the time to read it, i know I'm a bit long winded lol


Fantastic!

Thank you :)


That was an extensive post. I enjoyed it over my cup of coffee.

Great work. Were you using the spray compound and polish?? Have been thinking of trying them out and see how they do compared to M105/M205.

Ah nothing like a good write up reading over some coffee huh?

Yes we were using the spray compound/polish.

As far as how they work compared to 105/205...the biggest 'eh' part about them to me was the sprayer itself...as i said it was HOT when we did this detail...and the tip tried to get clogged on us a couple of times and wanted to just squirt a stream rather than a bigger spray pattern...but i live in Arizona and it was well over 100 degrees that day so, most probably won't experience that problem as much as we did.

The compound cut close to as well as 105 i think...probably a bit longer work time...after using a single pad for a few panels the pad does eventually become saturated....where as with 105 it usually will take a bit longer to get to that point...but, in the end i always have to change out pads anyway (i was using micro-fiber pads, Optimum ones).

It was pretty easy wipe away...compound wiped away with very little effort...105 sometimes can be a pain to remove, but mostly on DRY paint...this paint was only a year old so 105 probably woulda come off with no problem.

I honestly haven't used the Optimum Duo but this one time for a full detail. If you do buy it, keep the bottles in a cool area and give em a shake every couple of weeks or so just to be sure they stay mixed up well (like you would anything else).

Only other complain i'd have is the bottles tip easily as they are quite thin, BUT, the thin profile is a plus when trying to fit something into a tight area (as we do carry a lot of gear lol). So i guess it is all in your perspective.

All in all, i'd say give them a try. I have a gallon of 105 and D300 and use that most times for my correction work, probably cause I'm just comfortable with them and know them well..and they are a bit more cost effective...but i'd say having the Optimum duo in your arsenal would be a good idea. Ive heard quite a few guys SWEAR by the Hyper-Polish as being an awesome 1-stepper when doing work for someone who doesn't want full correction but does want a noticeable improvement.