Apc

[RoacheC]

New guy on the block, I am curious to know what are some of the best mixtures of APC for detailing? (rims, engine, viynl etc.)

[Bates Detailing]

I use a concentrated APC and dilute to these standards :

1:10 - leather
1:5 / 1:4 interior Auto
1:2 - Semi Interior
1:3 - Tires/wheel wells
1:4 - Auto Bumpers
1:3/1:2 - Carpets
1:4 - upholstery




All done by the eye of course - I will not sit there and measure it out exactly. I will start with a strong bottle an an auto for the areas that need strong apc, then water it down as I go down the list of things needing to get done for the job - basically using one bottle per job/ or 50 cents per job :dblthumb2: . Hope this helps!

[RoacheC]

I use a concentrated APC and dilute to these standards :

1:10 - leather
1:5 / 1:4 interior Auto
1:2 - Semi Interior
1:3 - Tires/wheel wells
1:4 - Auto Bumpers
1:3/1:2 - Carpets
1:4 - upholstery




All done by the eye of course - I will not sit there and measure it out exactly. I will start with a strong bottle an an auto for the areas that need strong apc, then water it down as I go down the list of things needing to get done for the job - basically using one bottle per job/ or 50 cents per job :dblthumb2: . Hope this helps!

This helps alot, this gives me some ground to work with. Thanks!