Swirls removing products.

[Johny B]

Hi Guys,

Which is the best swirls remover product are you using.I have looked at Mike's video in which he was using Wolfgang 3.0. together with a LC orange pads. It will be used on a black truck having swirls all over. There is so much products too choose from that before purchasing any I need to hear the expert's feedbacks.

Thanks and regards,
Johny.

[AutowerxDetailing]

You should check out some of the MF pad and compound systems. You would be amazed at the level of correction you can achieve with a DA, the right compounds, and some MF pads.

[ReflectiveAuto]

yes the above poster is correct...different levels of incorrections require different levels of correction with the correct tools and proper technique.

[Mike Phillips]

Hi Guys,

Which is the best swirls remover product are you using.I have looked at Mike's video in which he was using Wolfgang 3.0. together with a LC orange pads. It will be used on a black truck having swirls all over. There is so much products too choose from that before purchasing any I need to hear the expert's feedbacks.

Thanks and regards,
Johny.


The key to removing swirls and only having to do the job once is to use good pads but also good abrasive technology.

It's really very simple. ANYTHING that touches the paint has to be high quality, especially anything you machine apply and grind into the paint using a machine. Pads are important as is the right tool and technique but the key factor when doing any type of correction work is to use products that use good abrasive technology.

The Wolfgang Total Swirl Remover and Finishing Glaze are very good products that won't let you down. The TSR is a Medium Cut Polish and the Finishing Glazes is a Fine Cut Polish and will tackle just about anything that's in your garage.


I've been here three years now and here's one of the first forum members I helped to remove swirls that was new to machine polishing, take a read through this thread, although it's three years old it's just as accurate today as it was when it wax posted...

How To Remove Horrible Rotary Buffer Swirl Marks out of a 350Z using the Wolfgang Twins (http://www.autogeekonline.net/forum/auto-detailing-101/21413-horrible-swirl-marks.html)



Before - Rotary Buffer Swirls Everywhere in the paint
http://www.autogeekonline.net/forum/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3.http://www.autogeekonline.net/gallery/data/793/DunstonBefore01.jpg

http://www.autogeekonline.net/forum/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3.http://www.autogeekonline.net/gallery/data/793/DunstonBefore02.jpg

http://www.autogeekonline.net/forum/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3.http://www.autogeekonline.net/gallery/data/793/DunstonBefore03.jpg


After - A 100% Swirl Free Finish
http://www.autogeekonline.net/gallery/data/793/DunstonAfter01.jpg

http://www.autogeekonline.net/gallery/data/793/DunstonAfter02.jpg

http://www.autogeekonline.net/gallery/data/793/DunstonAfter03.jpg


:xyxthumbs:

[Mike Phillips]

Here you go, brand new forum member sharing their first machine correction project.


http://www.autogeekonline.net/forum/show-n-shine/54639-my-first-paint-correction.html


:xyxthumbs:

[Johny B]

Hi Guys,

Special thanks for all the replies and Mike's articles.Only one more question what size of Wolfgang 3.0 should I buy for this black truck 16 oz or 32 oz?
Johny

[siberianrunner]

I just finished a 16 oz bottle of WGTSR, used it on 6 cars for full corrections and maintenance throughout the summer. Great product!

[Johny B]

Hi,
Thank you siberianrunner I'll buy WGTSR 16 oz.
Regards,
Johny