PDA

View Full Version : Video & Pictures: 1965 Fastback Mustang - Gtechniq EXO Show Car Makeover!


Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 [14] 15 16 17
rider9195
08-09-2012, 06:55 PM
Are those white towels the edgeless ones?? Those are the best towels!
Nick McKees37
08-09-2012, 06:55 PM
btw tell mike he can also coat the glass with EXO

Thanks for the tip Rob!
BENCH
08-09-2012, 06:56 PM
Microfiber gloves? Never heard of such.
Nick McKees37
08-09-2012, 06:57 PM
Are those white towels the edgeless ones?? Those are the best towels!

It is a towel we'll be carrying in the not too distant future. :)
Nick McKees37
08-09-2012, 06:58 PM
Microfiber gloves? Never heard of such.

Microfiber gloves have a million and one uses. Using them in conjunction with your microfiber towel improves "grip strength."

Looks like they're getting ready to apply EXO!
Audi X2
08-09-2012, 06:58 PM
and x2 coats

That seems to be quite important for the crew to know!
gtechrob
08-09-2012, 06:58 PM
btw - exo is not too bad for streaking - you will be able to get residues off pretty easy
gtechrob
08-09-2012, 06:59 PM
c1 is much more critical for this
Bigbull2984
08-09-2012, 07:00 PM
Microfiber gloves? Never heard of such.

They great when taking off LSP. Usually I so tired by this step I might lay my palm on car. MF gloves really help, to avoid those smudges.
Dirtyrango212
08-09-2012, 07:00 PM
Pinnacle sign back wall
Audi X2
08-09-2012, 07:00 PM
btw - exo is not too bad for streaking - you will be able to get residues off pretty easy

I really like the way this product is applied.
rider9195
08-09-2012, 07:00 PM
It is a towel we'll be carrying in the not too distant future. :)

Awesome! I still have some from when PAC(Proper Auto Care) was still open.
Nick McKees37
08-09-2012, 07:01 PM
btw - exo is not too bad for streaking - you will be able to get residues off pretty easy

It's going on effortlessly so far. I don't see any streaking at all. Great product Rob. :dblthumb2:
ihaveacamaro
08-09-2012, 07:01 PM
Gtechniq was clear that not even IPA would properly prep the surface for application of EXO. Mike spoke with Gtechniq before the broadcast and I believe they approved Wurth Clean Solve.


See above reply.

But I wasn't talking about simply IPA. CG Wash N Gloss at the higher dilution ratio to strip LSP, and then IPA. Wouldn't that be different than just simply IPA? Or would we still need Wurth?
gtechrob
08-09-2012, 07:01 PM
here's the money shot on a mclaren with a fresh applicaton of exo
[ame=http://www.youtube.com/watch?v=41qaFYObevc]Gtechniq EXO hydrophobic effect on McLaren 12c - YouTube[/video]