View Full Version : Sealant Removal Techniques
spewking
07-20-2012, 07:11 PM
So, I have completed a full detail finishing up with 4*UPP. Its been 2 weeks, and the sealant in the seams and crevices is "collecting" and turning white. I took a MF towel to quickly rub off and it is stuboorn in coming off.
What do you guys suggest? MF towel with a little shampoo? Certainly not IPA?
Pls advise on any techniques or special tools used.
Thanks.
David
rider9195
07-20-2012, 07:15 PM
I would use either IPA, an APC, or a good heavy washing with a pressure washer. Next time just be more careful going over seams and there will be less cleaning up.
DaveT435
07-20-2012, 07:18 PM
Have you tried a little cleaner on a Qtip?
spewking
07-20-2012, 07:19 PM
Have you tried a little cleaner on a Qtip?
Like APC?
DaveT435
07-20-2012, 07:35 PM
Yes...or IPA...just use as small amount of cleaner as possible. The cotton should work down in the crevices and do most of the work...
rider9195
07-20-2012, 07:53 PM
Something I learned and use lots!
Quick Tip: Clean between body panels and in nooks & crannies. - Autopia Forums - Auto Detailing & Car Care Discussion Forum (http://www.autopiaforums.com/forums/detail-institute-presented-autopia-carcare-com/39059-quick-tip-clean-between-body-panels-nooks-crannies.html)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.