PDA

View Full Version : Meghan finally got Neothin to detail her SUV!



Pages : [1] 2

Meghan
05-18-2006, 11:36 AM
Ok as a few of you heard , Harrison (aka Neothin) finally came and detailed my badly neglected baby last Saturday.
I will give you a little history on her first, I have a Medium Wedgewood Blue Metallic Ford Expedition 2001. She is my daily driver and I drive quite a distance everyday to get to work on lovely I-95. She was attracting some swirls - I don't know from where but they were loving on her. So, after begging and pleading Harrison made the committment to attempt to fix her up for me.
http://www.autogeekonline.net/gallery/data/500/dirty.jpghttp://www.autogeekonline.net/gallery/data/500/before.jpg

http://www.autogeekonline.net/gallery/data/500/beforeBugs.jpg
This is her dirty!

Process....
First the foam gun and a sheepskin wash mitt took on the hard job of removing the layers of dirt and grime.
I wish I could have video taped him doing this, Harrison has a very slow, yet special unique way of washing. I had to go inside and relax, while he did it, it was tiring me out just watching.
http://www.autogeekonline.net/gallery/data/500/foam_gun.jpghttp://www.autogeekonline.net/gallery/data/500/harrison.jpg
He is working hard!

Then he attacked the front with Poorboys Bug Squash and a Pinnacle Safe Scrub. It appears the front of my truck was a burial ground for about 5000 love bugs. Lets just say they died happy. :p I was very impressed with the Safe Scrub and I could tell Harrison was too. The bugs all came off with great ease.
http://www.autogeekonline.net/gallery/data/500/BugSponge.jpg

Meghan
05-18-2006, 11:36 AM
http://www.autogeekonline.net/gallery/data/500/swirls.jpg
Before XMT

Then came the XMT!!! First we ( I use "we" loosely) tried the XMT #2 with a Lake Country White Polishing Pad. (Spraying the pad with XMT Pad Conditioner first.)

http://www.autogeekonline.net/gallery/data/500/XMT_conditioner.jpghttp://www.autogeekonline.net/gallery/data/500/XMT_2_polishing_pad.jpg

Found it removed the majority of the swirls on the front hood, yet we had to try it with the orange light cutting pad, too.
http://www.autogeekonline.net/gallery/data/500/XMT.jpg

At this time Harrison disappeared to my wheels. The buffer sat lonely so I decided the rest of the vehicle wasn't going to shake off my swirls, so I did the rest of the beast. (I actually had a blast with the PC7424).

http://www.autogeekonline.net/gallery/data/500/afterXMT.jpghttp://www.autogeekonline.net/gallery/data/500/afterXMT2.jpg
Great reflection shots after XMT.

http://www.autogeekonline.net/gallery/data/500/banda.jpg

Truck after XMT #2

Harrison decided to see just how shiney he could make my wheels, for anyone who has an Expedition you know about their brake dust problem. I think they keep Kleen Wheels in business!
Anyways, he used Nevrdull on the wheels and it brought them out to a beautiful shine. When I got home I put a coat of DP Wheel Glaze on them so I wont have to scrub so hard the next time.
http://www.autogeekonline.net/gallery/data/500/neverdulltires.jpghttp://www.autogeekonline.net/gallery/data/500/TIRE.jpg



http://www.autogeekonline.net/gallery/data/500/FLIP.jpg
My cute feet in the reflection of my clean wheels

Meghan
05-18-2006, 11:36 AM
Then back to the truck with some XMT Carnauba Finishing Glaze.... there were some minor swirls left, especially on the hood. Harrison put on a grey finishing pad and went to work with the XMT. Besides the awesome smell, I could tell from his cute grin we was very surprised at the results. Whatever we left from the swirl removers, the Finishing Glaze concealed very nicely.
http://www.autogeekonline.net/gallery/data/500/Carn_Finishing_Glaze.jpg
Harrison working in the Finishing Glaze


Then for the big decision, what topper were we going to use. I suggested DP Max Wax !
It goes on so easy and removes like butter, leaving behind a wet finish.
http://www.autogeekonline.net/gallery/data/500/Applying_Max_Wax.jpg http://www.autogeekonline.net/gallery/data/500/cobratowel.jpg
Cobra Polishing Towel making removing any wax or sealant a breeze.



Last but not least, I cannot remember the last time I cleaned the engine, SO we did. :eek: We used DP Exterior Cleaner, which everyone knows is one of my favorite products. It worked wonders on the engine, felt like my baby was brand new again. Harrison then recommended I put a coat of 303 over it to help keep it clean (I forgot, dont tell him!).
http://www.autogeekonline.net/gallery/data/500/engine_before_.jpg
Before the cleaning


http://www.autogeekonline.net/gallery/data/500/Dp_engine4.jpg http://www.autogeekonline.net/gallery/data/500/engine.jpg

Meghan
05-18-2006, 11:39 AM
And that was that, my dirty baby turned into a beauty in a matter of about four hours! :awesome:

Thank you Harrison, I might have to drive to Orlando every few months when you move - just to visit, of course. :cheers: :grouphug:

http://www.autogeekonline.net/gallery/data/500/DPmaxwax1.jpghttp://www.autogeekonline.net/gallery/data/500/reflectionwet.jpg
She is glowing!!


http://www.autogeekonline.net/gallery/data/500/reflectionSide.jpghttp://www.autogeekonline.net/gallery/data/500/reflectionsSide.jpg


http://www.autogeekonline.net/gallery/data/500/Reflection.jpghttp://www.autogeekonline.net/gallery/data/500/reflection2.jpg


http://www.autogeekonline.net/gallery/data/500/reflectionBuilding.jpg

I have some reviews from Harrison that I will be adding in for you, please let us know what you think of our Saturday of fun!

Surfer
05-18-2006, 12:19 PM
Nice, because I know you worked so hard;) , but where's the body attached to that foot???:D




http://www.autogeekonline.net/gallery/data/500/FLIP.jpg
My cute feet in the reflection of my clean wheels

Meghan
05-18-2006, 02:37 PM
Ok, I have some reviews from the young man who detailed my vehicle....

Pinnacle XMT Polishing Pad Cleaner-

Out of the entire Pinnacle XMT line, I was most impressed with this product. It made quick work of pads that were still damp with product. Spray the pad 4 times or so, let the cleaner soak in for a minute or two, and then massage the pad under running water and it was clean in less than 30 seconds. I tested this product on a dirty pad that had had the product completely dry (I had used the pad the previous week and forgot to clean it after using it). I sprayed the pad with the XMT pad cleaner and let the cleaner soak and loosen up the dried product for about a minute and a half. I then proceeded to clean the pad under running water. Even though the product had completely dried into the pad, the XMT pad cleaner product was able to make quick work of it and completely clean out the pad. I was rather impressed.:awesome:


Poorboy’s Bug Squash-

Meghan's truck was covered in lovebugs, you couldn’t tell the paint color in the front. I sprayed the bugs with undiluted Bug Squash and let it soak for about a minute and a half. I then used a Pinnacle Safe Scrub pad to remove the bugs. It only took about 5 minutes to remove all of the bugs. This product softened up the bugs enough to where no heavy scrubbing with the sponge was needed. Its made a tough job turn easy.

Pinnacle Safe Scrub, Bug & Tar Pad-

I was very impressed with this product. I soaked the bugs in undiluted Poorboy’s Bug Squash for about a minute and a half and then went to town with the bug sponge. 5 minutes later all of the bugs were off of the paint and my bug sponge was now black with bug guts.

Pinnacle XMT Carnauba Finishing Glaze-

I was rather impressed with this product. The first thing I noticed was a strong grape smell. A little overpowering at first, but it was pleasant nonetheless. The product went on smoothly and evenly when applied by a black finishing pad on a PC@ speed 3. Product removal was quick and easy. The product gave the blue metallic paint a noticeable wetness even in direct sunlight. I would definitely recommend you to at least try this product.

Detailer’s Pride: Max Wax-

This was applied to the Expedition after using XMT. I applied in direct sunlight to a very hot car (dark blue paint in the Florida summer in May) using a Pinnacle foam applicator pad. The product was easy to apply, though it did tend to dry up quickly. I attribute this to the heat though. The product was even easier to remove which was a nice surprise. I was applying the product kind of thick so that the product didn’t dry up so quickly as I applied. On most carnauba’s thick applications equate to a difficult removal. This was not so with Max Wax. Product removal was just as easy as a thin application of other carnaubas. The product gave a nice deep wet look to the expedition even though some defects were present. :applause:


Eagle One Nevr-Dull-
I used this product on Meghan's Ford Expedition wheels. I had previously clean the wheels with car wash soap and a wash mitt. After this cleaning, some embedded brake dust was still present. The Nevr-Dull was able to remove all of this embedded brake dust. The chrome took on a noticeably greater luster. Removal was a little bit of a pain. Without constantly change sides on the towel, the product liked to smear vs wipe off cleanly.:D

FloridaNative
05-18-2006, 03:50 PM
Great write up and pics Meghan! And good work Harrison. :)

ScottB
05-18-2006, 06:10 PM
Not what are "we" doing to return the favor ????? I cannot believe a AutogeekIAN is aloud to drive something so dirty. Max makes you park in the back correct ??

Neothin
05-18-2006, 06:42 PM
nah, just just has to park in front of the doctor's office :-P

meghan forgot to add that I also applied some poorboy's Bold n Bright to the tires. I also used some meguiar's PlastX on the front liscense plate cover (now i wonder why though... the patriots!) seeing as it was looking kinda yellowish.

looking at the pictures, i realize now that I forgot to wipe out the wheel wells. ah well, just another reason to drive back down to the geek.

go figure... it rained 2 days after i did all this. boooo!!! no rain in florida for many weeks, and then i detail a truck and voila it downpours. hmmm... maybe i should do that more often seeing as the state is so dry!

cwcad
05-18-2006, 11:12 PM
Nice detail. Good write up. Enjoyable pictures!!

At the risk of outing myself....MORE TOES!!!:D

Surfer
05-19-2006, 10:48 AM
At the risk of outing myself....MORE TOES!!!:Dpics of body attached to those toes, whadaya say Meghan?? :D

How did the truck look after all the rain?

Meghan
05-19-2006, 10:54 AM
pics of body attached to those toes, whadaya say Meghan?? :D

How did the truck look after all the rain?
Surfer I will get you one...but don't get your hopes up!! We aren't models but Detailing Divas!!! :( As for the truck it is a little nasty from the rain and having to drive down a dusty road, but I am going to attack her with the foam gun tomorrow. I can't have her dirty for the weekend, just waxed the Waverunner and put a coat of 303 on it, I don't want to embarrass the Waverunner while having to pull her down the road.:p

Neothin
05-19-2006, 09:15 PM
if i may go a little off topic here... meghan, what wax do you use on the waverunner that can hold up against the salt water?

joe.p
05-19-2006, 09:25 PM
Surfer I will get you one...but don't get your hopes up!! We aren't models but Detailing Divas!!! :( As for the truck it is a little nasty from the rain and having to drive down a dusty road, but I am going to attack her with the foam gun tomorrow. I can't have her dirty for the weekend, just waxed the Waverunner and put a coat of 303 on it, I don't want to embarrass the Waverunner while having to pull her down the road.:p
I Haven't seen any pics, but from reading your post i already know your beautiful send some :Picture: after a few of theese :cheers: :)

Neothin
05-19-2006, 09:39 PM
she'll take mich ultra in a chilled mug. smirnoff triple black for me!

meghan is a cutie though :P