View Full Version : my 3M Ultrafina is running out, what do you recommend for replacement?
jackychai
07-10-2012, 01:49 PM
thanks guys!!
SonOfOC
07-10-2012, 02:01 PM
If you had no issues, then some more Ultrafina!
Otherwise, Menzerna SF4500 / PO85rd.
jackychai
07-10-2012, 05:22 PM
no issue at all. just want to try out different ones to see if they would be easier for me. thanks ur suggestion. i will look into it.
richy
07-10-2012, 06:24 PM
For that jeweling stage, either of those 2 mentioned will be fine. I think the 3M is more $$. 85rd is hard to beat.
Sent from my iPhone using Tapatalk
ScottB
07-10-2012, 06:43 PM
menzerna 085rd ...
davidc
07-10-2012, 06:48 PM
Same here menzerna 085rd
Dave
Dr Oldz
07-10-2012, 07:28 PM
Tough to beat UF. One of the best out there.
Harleyguy
07-10-2012, 08:20 PM
UF and the 3m UK backing plate and pads are a win win combo
jackychai
07-11-2012, 04:21 AM
thank you for all the great reply. i think i will get both because its really hard to decide.
but i thought of a question. if i use 3m polishing glaze (still have a gallon left...) will it provide an excellent result with menzerna p085rd? 3m is oil base and menzerna is water base if i did not make mistake.
Sent from my SGH-T989 using AG Online
truckbutt
07-11-2012, 08:23 AM
If you had no issues, then some more Ultrafina!
Otherwise, Menzerna SF4500 / PO85rd.
+1:xyxthumbs:
milky
07-11-2012, 10:22 AM
Yes get both! They both work very well and the Ultrafina has been a blessing especially on softer, sticky paints.
Pats300zx
07-11-2012, 12:48 PM
I love Ultra Fina with the 3M waffle weave pads. I will always have it in my detailing cabinet.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.