question about xmt360

[bigdaddydee]

i'm asking this because i'm a little confused about this xmt 360 it say's
Continue to polish even as the product dries. XMT 360™ disappears, leaving nothing on the paint but a clean, glossy shine. There is no need to buff.
how long do i need to keep the pc 7424 on my vehicle i do the norm three passes with the pc7424 and the xmt 360 is still wet and i need to wipe it with a microfiber towel and what lc ccs pad do i use with it :buffing:

[cleanmycorolla]

use a white pad, thats what i have used. keep the pcxp on your vehicle like it states, until it is clear with no need to buff, that's pretty much how i have used xmt 360

[bigdaddydee]

ok so just keep doing passes until i don't see any xmt left on the paint and i don't need to worry about burning my paint. one more question do i need to put a quarter size amout on the pad for each section i do. thanks for the help :xyxthumbs:

[Jaretr1]

In my experience, I have usually had to wipe off some residue, but most of the product does disapear if you do not use to much of it. 6 sections passes should be enough.

[shoeless89]

In my experience, I have usually had to wipe off some residue, but most of the product does disapear if you do not use to much of it. 6 sections passes should be enough.
:iagree:

[lt5686sb]

use a white pad, thats what i have used. keep the pcxp on your vehicle like it states, until it is clear with no need to buff, that's pretty much how i have used xmt 360

Hmm, I was planning to use the green pads with the XMT. Is this a bad idea?

[Sunshyne]

Hmm, I was planning to use the green pads with the XMT. Is this a bad idea?

those will work as well :xyxthumbs: