PDA

View Full Version : Layering BFWD with WG3.0


New Image
06-30-2012, 03:26 PM
Just as the title says, can I lay down BFWD and follow up with a WG3.0?

Car is 08 BMW 3 series Black.
Buckskincolt
06-30-2012, 03:32 PM
Sure why not, just let the Blackfire fully cure first before topping.
truckbutt
06-30-2012, 03:54 PM
Just as the title says, can I lay down BFWD and follow up with a WG3.0?

Car is 08 BMW 3 series Black.
Why would you want to? They are both sealants and when you cover the BFWD with WG 3.0 you may lose the slick wet look that BFWD gives. Just my 2c, but I would do a second coat of BFWD 12 hours after the first and enjoy the slick wet shine.
rider9195
06-30-2012, 04:47 PM
Why would you want to? They are both sealants and when you cover the BFWD with WG 3.0 you may lose the slick wet look that BFWD gives. Just my 2c, but I would do a second coat of BFWD 12 hours after the first and enjoy the slick wet shine.

:iagree:

Then after that top with Midnight Sun and you have a killer combo.
RoadRageDetail
06-30-2012, 05:05 PM
:iagree:

Then after that top with Midnight Sun and you have a killer combo.

^^^^ for example:
http://i224.photobucket.com/albums/dd129/Road_Rage_Photos/Jeebus%20Zo6/IMG_4289.jpg

Two coats BFWD followed by BFMS. I do recommend keeping the paint cool as long as possible following wax application, overnight if possible. If it gets hot too soon then you will have bonding issues.