2012 Golf R, Prep and Opti-Guard application.

[RaskyR1]

2012 Golf R, Prep and Opti-Guard application.


New Golf R in for Opti-Guard treatment. Overall the paint was in great shape with only the B pillars and a few areas needing considerable amounts of correction. There was some very odd marks on this car however which I've never seen on a new car before. They looked like abrasion marks almost like what you see back in the days when owners put vinyl bras on the front of there car and they flapped in the wind, slowly abrading the paint. One area behind the front wheel was all they way down to the primer and it was in the same location on all 4 wheel wells. The lower side spoilers also had the marks in several areas. I was able to remove them in most areas...if anyone else has seen this on new Golf R's let me know.

Justin came in to help out on this one too.

Process:

Wash - Foamed with OPC/CGCW followed by 2BM wash and CGCW
Wheels - P21S Gel and various brushes
Tires - OPC, dressed with Hyper Dressing 3:1
Paint prep - Nanoskin towel and Glide s lube, Nanoskin fine pad on glass.
Spot correction step - D300/M105 mix on the GG6 with Megs MF cutting pads
Finishing Step - 106fa via DA and crimson LC pads
Protection - Optimum Opti-Guard


Before
http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120616-_MG_7447.jpg

http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120616-_MG_7448.jpg

Drivers side rear wheel well marks


http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120616-_MG_7452.jpg

Drivers side front wheel well...you can see where paint had been abraded through
http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120616-_MG_7453.jpg

passenger side front
http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120616-_MG_7457.jpg

passenger side rear
http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120616-_MG_7461.jpg

http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120616-_MG_7459.jpg

Side spoiler....hard to get this one in pics
http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120616-_MG_7466.jpg

http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120616-_MG_7467.jpg

Justin going to town on the back
http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120616-_MG_7471.jpg

Owners plates suit this car well IMO! :)
http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120616-_MG_7472.jpg

Me working on the front
http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120616-_MG_7479.jpg

We also coated the owner new set of wheels for him....love these wheels!
http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120616-_MG_7487.jpg

Finished pics
http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120616-_MG_7489.jpg

http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120616-_MG_7491.jpg

http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120616-_MG_7492.jpg

http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120616-_MG_7496.jpg

http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120616-_MG_7498.jpg

Scuffs removed
http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120616-_MG_7499.jpg

http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120616-_MG_7500.jpg

http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120617-_MG_7502.jpg

http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120617-_MG_7505.jpg

http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120617-_MG_7506.jpg

http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120617-_MG_7509.jpg

http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120617-_MG_7510.jpg

http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120617-_MG_7512.jpg

http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120617-_MG_7516.jpg

http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/20120617-_MG_7522.jpg


Thanks for looking, :)

Rasky

[brentech]

What did you use on the plastics from those first 2 pictures?

I'm in a '12 GTI and mine are basically in the same condition since day 1. I need to fix that up.

[RaskyR1]

What did you use on the plastics from those first 2 pictures?

I'm in a '12 GTI and mine are basically in the same condition since day 1. I need to fix that up.

The paint on the B pillars is a lot softer then the car paint and may even be single stage or they have a tinted clear.

I used the same products on them as I did the car. ;)

D300/M105 mix on the GG6 with Megs MF cutting pads
Finishing Step - 106fa via DA and crimson LC pads

[Ray@Autogeek]

Why aren't those wheels on the car yet!? I have TSW's too :xyxthumbs:

[RaskyR1]

Why aren't those wheels on the car yet!? I have TSW's too :xyxthumbs:

LOL....owner installed them himself. Sent me some pics though. ;)

http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/CarAfterOptiCoat1.jpg

http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/CarAfterOptiCoat3.jpg

http://i75.photobucket.com/albums/i288/Raskyr1/Golf%20R/CarAfterOptiCoat2.jpg

[brentech]

The paint on the B pillars is a lot softer then the car paint and may even be single stage or they have a tinted clear.

I used the same products on them as I did the car. ;)

D300/M105 mix on the GG6 with Megs MF cutting pads
Finishing Step - 106fa via DA and crimson LC pads

Alright, figured as much.
I just need a better tool for the job, need one of those small polishers for both that area and around many of the lines on these cars.

[Father87]

Just went thru all your recent posts, you're a monster! Tremendous work! True professional.