HOW TO: Griots Garage DA Switch Relocation

[LuxuryMobile]

Griots Garage DA Polisher Swith Relocation

(**this write up is based off of Gary Dean’s video**)

After constantly shutting of my GGDA while using it (accidently bumping switch with my thumb) I decided to relocate the switch to the top of the polisher. The video tutorial Gary Dean put together was very helpful.

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4806.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4807.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4808.jpg



First thing to do is remove the handle of the polisher if it is attached, I know some guys have the handle already removed. The tool to remove the handle should have come with your polisher.

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4809.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4810.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4814.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4816.jpg



Now that the handle has been removed from the tool, it is time to remove the black cover at the tip of the polisher. The cover can be carefully pried off with a flat head screwdriver or probably even just carefully removed using just your hands.

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4817.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4818.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4820.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4821.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4822.jpg




Once the cover is removed you will find 4 screws that hold the head of the polisher to the body of the polisher. Each of these screws can be carefully removed with a Phillips head screwdriver. After the last screw is removed the head of the polisher will separate from the body.

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4825.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4826.jpg


http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4830.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4831.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4833.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4834.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4835.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4836.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4837.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4838.jpg




Now you are going to rotate the body of the polisher to the position where the switch will be in the position you would like for it to be, in relation to the head of the polisher. For me I wanted to move the switch to the top of the machine.

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4839.jpg



Once the head of the polisher is back together with the body of the polisher, just repeat the steps of removal to get the tool put back together.

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4840.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4841.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4842.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4843.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4844.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4845.jpg




Hope this helps people put the switch in a position that I feel it should have been to start with. Feel free to ask any questions.

[feslope]

Griots Garage DA Polisher Swith Relocation

(**this write up is based off of Gary Dean’s video**)

After constantly shutting of my GGDA while using it (accidently bumping switch with my thumb) I decided to relocate the switch to the top of the polisher. The video tutorial Gary Dean put together was very helpful.Once the cover is removed you will find 4 screws that hold the head of the polisher to the body of the polisher. Each of these screws can be carefully removed with a Phillips head screwdriver. After the last screw is removed the head of the polisher will separate from the body.
http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4834.jpg

http://i1059.photobucket.com/albums/t422/LuxuryMobile3/Griots%20Garage%20Polisher/IMG_4835.jpg
Hope this helps people put the switch in a position that I feel it should have been to start with. Feel free to ask any questions.I added a step when I did mine. I also turned the subplate 1/4 turn to maintain the same ventilation. He warns not to remove the subplate which contains the main support bearing for the armature. I just turned it without removing it.

This becomes apparent when you remove the front gearbox/head cover.

[ski2]

I wonder if this voids the warranty??

[Bunky]

I saw the video earlier this week. I am now more wary about making the change.

I guess someone could ask Griots.

[LuxuryMobile]

I'm sure it voids the warranty. Wouldn't make sense if they were going to let you take apart the machine then send it in when it stops working and expect a free one.

If I ever need to send it in I will put it back to the normal position and send it in and take my chances.

[Jeff120]

Just put it back before you have to send it it. You arent really doing anything serious, just flipping the casing, not like you rewired it or anything.

[ScottB]

I wonder if this voids the warranty??

my guess is an immediate , yes !

[Flash Gordon]

Who is Garry Dean and what is his method?

[DLaw]

@Flash. I haven't seen him around here in a long time. He is still posting videos on YouTube btw.


Sent from my iPhone using AG Online