Blackfire GEP/WDA some question

[max0106]

I have Blackfire Gloss Enhancing Polish/wet diamond all finish paint protection, but I still confuse which pad should I use
1. gloss enhancing polish with LC CCS white or black?
2. wet diamond all finish paint protection with LC CCS blue or red?
3. gloss enhancing polish can be remove water spot? or I need what products?

[mjlinane]

1. BF GEP - black, green or maybe white depending on paint hardness.
2. BF AFPP - red or blue is fine.
3. Depends. If they are mineral build-up, probably. If it is etching, likely not. Would likely need compounding.

[max0106]

1. BF GEP - black, green or maybe white depending on paint hardness.
2. BF AFPP - red or blue is fine.
3. Depends. If they are mineral build-up, probably. If it is etching, likely not. Would likely need compounding.

thanks for your help

My car is Mazda CX7(made in japan), so it's paint is hard or?

[mjlinane]

If I had to guess, probably on the softer side. But you never know. Do a test spot - try with black and see if it leaves the finish you are looking for. If not, step up.