Ready for a rotary...your opinions please

[A.P.A.D.]

I am about to pull the trigger on my detailing gig and go full time with it, but before i do so, i would like to make some last purchases before i am counting on the detailing money to support the family. right now, all the money i make detailing goes back into the business and my full time job pays the bills.

i currently have a PC and i use 5.5 LC CCS pads.

i want to go ahead and buy a rotary polisher and all the accesorries i will need with it. wool pads, adaptors, pads, pad washers, etc. i want to have everything i need for poorly neglected paint, boat gelcoat, etc.

i know there are plenty of threads in which people ask what kind of rotory to get, but what i would like help with is forming a MUST have wishlist for a rotory and everything you would see i would need to be able to effectively use the machine to full potential.

thanks in advance for your help!

[Danube]

If you want to spend extra $$ go Flex, otherwise Hitachi SP18VA.

Hope this helps.

;-))

[A.P.A.D.]

if i went flex, i would probably do the L3403 VRG, due to cost

what other things would u suggest i purchase once i decide which machine i want to roll with?

[tuscarora dave]

Makita or Dewalt if you're really going to use the rotary. The Flex isn't what I would call a serious tool for a professional detailer. I tried to use my PE-14 for correcting an entire car in a profitable amount of time and the thing was so hot it was burning my hands to hold onto it after just doing the hood and front fenders.

Ever ride a small motorcycle and then jump from that to a big bore bike? That's what it was like when I picked my Makita back up after running a Flex PE-14 for 1/2 a car.

As far as what you'll need to go with whatever rotary you choose. I'd say some wool pads of at least 6" in size and also some 4" wool pads of course with the corresponding backing plates, foam pads both 4" and a larger size too. All I ever use is orange light cutting and what ever color finishing pads a particular manufacturer has. I have a few white polishing pads and never use them.

I used to use a denture brush but have since become quite accustomed to the Lake Country pad cleaning brush for foam pads. Definitely a real (steel) wool pad spurring tool (not one of those plastic ones).

Lots of tape both 1" and 2".

Along the lines of absolute necessity, that's really all I can think of right now.

[tuscarora dave]

Oh yeah, Just thought of this. Put aside a few hundred to a thousand dollars to cover the out of pocket cost of rotary related mistakes that will more than likely (eventually) happen.

[A.P.A.D.]

Thanks Dave! i am actually leaning toward the makita as of right now, and your comments make me lean more toward it as well.

do u think a pad washer is really all that necessary? or do u think i can spend $135 in a better way, like tape =)

[A.P.A.D.]

Oh yeah, Just thought of this. Put aside a few hundred to a thousand dollars to cover the out of pocket cost of rotary related mistakes that will more than likely (eventually) happen.


true, i like to keep a "cushion" of $$ set aside for such things. my main purpose for the machine will be boats, since i have heard a PC on gelcoat can take forever. i have a feeling once i use the makita, it will be used often though.

[tuscarora dave]

Thanks Dave! i am actually leaning toward the makita as of right now, and your comments make me lean more toward it as well.

do u think a pad washer is really all that necessary? or do u think i can spend $135 in a better way, like tape =)
You're welcome. A pad washer is definitely just a luxury device. No way I would ever spend the money for a new one. I been rotary polishing for a few years without one and have had no problems with an occasional pad cleaning session. I'd suggest spending the money on pads / backing plates instead.


true, i like to keep a "cushion" of $$ set aside for such things. my main purpose for the machine will be boats, since i have heard a PC on gelcoat can take forever. i have a feeling once i use the makita, it will be used often though.
Once you think you have mastered the rotary and start telling people that you've never burned paint, that money will come in handy. Gel coat can take forever with a rotary.;)

[A.P.A.D.]

Thanks for your help Dave!

[tuscarora dave]

Anytime Jon. Just PM me or call if I can help. I'd be glad to.

[A.P.A.D.]

will do! thanks a bunch!

[Detailchick]

I am about to pull the trigger on my detailing gig and go full time with it, but before i do so, i would like to make some last purchases before i am counting on the detailing money to support the family. right now, all the money i make detailing goes back into the business and my full time job pays the bills.

i currently have a PC and i use 5.5 LC CCS pads.

i want to go ahead and buy a rotary polisher and all the accesorries i will need with it. wool pads, adaptors, pads, pad washers, etc. i want to have everything i need for poorly neglected paint, boat gelcoat, etc.

i know there are plenty of threads in which people ask what kind of rotory to get, but what i would like help with is forming a MUST have wishlist for a rotory and everything you would see i would need to be able to effectively use the machine to full potential.

thanks in advance for your help!

I would go for the makita comes with the bag and 2 good quality wool pads
Makita 9227C 7 inch Circular Polisher (http://www.autogeek.net/ma927po.html)

LC backing plate I know It works for 5.5" flat pads so you can use the same flats as your pc
Rotary 4 inch Flexible Backing Plate (http://www.autogeek.net/5-inch-rotary-plate.html)

you can get a spur to clean the wool pads (although I have used screwdrivers in the past)
Lake Country Wool Pad Spur, pad spurring tool, pad cleaning tool (http://www.autogeek.net/wool-pad-spur.html)

and a foam pad conditioning brush (although I use a toothbrush)
Foam Pad Conditioning Brush cleans and reconditions foam and wool pads on the buffer. remove excess caked wax and polish from buffing pads. (http://www.autogeek.net/padtool.html)

I think the majority of people get by without a pad washer, you can just get extra pads. The new dewault looks spiffy but I have never used it, just looking at it looks better/lighter than the old 849. the makita speed goes from 600/3,000 rpm the dewault linked starts at 0/3,500rpm.

DeWalt DWP849X 7 & 9 inch Variable Speed Rotary Polisher, rotary buffer, circular polisher, car polisher (http://www.autogeek.net/dewalt-dwp849x-polisher.html)

[tuscarora dave]

I want that new Dewalt!! I'd trade my PE-14 for one in a minute.

[A.P.A.D.]

I would go for the makita comes with the bag and 2 good quality wool pads
Makita 9227C 7 inch Circular Polisher (http://www.autogeek.net/ma927po.html)

LC backing plate I know It works for 5.5" flat pads so you can use the same flats as your pc
Rotary 4 inch Flexible Backing Plate (http://www.autogeek.net/5-inch-rotary-plate.html)

you can get a spur to clean the wool pads (although I have used screwdrivers in the past)
Lake Country Wool Pad Spur, pad spurring tool, pad cleaning tool (http://www.autogeek.net/wool-pad-spur.html)

and a foam pad conditioning brush (although I use a toothbrush)
Foam Pad Conditioning Brush cleans and reconditions foam and wool pads on the buffer. remove excess caked wax and polish from buffing pads. (http://www.autogeek.net/padtool.html)

I think the majority of people get by without a pad washer, you can just get extra pads. The new dewault looks spiffy but I have never used it, just looking at it looks better/lighter than the old 849. the makita speed goes from 600/3,000 rpm the dewault linked starts at 0/3,500rpm.

DeWalt DWP849X 7 & 9 inch Variable Speed Rotary Polisher, rotary buffer, circular polisher, car polisher (http://www.autogeek.net/dewalt-dwp849x-polisher.html)


thank you for your feedback. i will include the spur, 3.75" backing plate, 6" backing plate, 6.5" and 4" wool pads, 9 7.5" orange CCS, 3 7.5" yellow CCS, and a yellow centering post.

i think i will marinate on this in the wishlist for a week and then place the order (unless there is an awesome sale monday!!!!Im the MAN)

[Detailchick]

I want that new Dewalt!! I'd trade my PE-14 for one in a minute.

yeah maybe I'll get it when my Makita breaks.....

:laughing: like that's going to happen