m105/205 or menzerna what do you recommend

[s500]

m105/205 or menzerna what do you recommend for porter cable 7424xp. should i use flat pads or the ones with holes which also would you recommend.thanks

[atoy]

For pcxp i recommend megs m105 and m205 for defect removal using microfiber pads. I like Optimum mf pads better than megs

[Rez90]

Depends on the paint you're working on

[BobbyG]

m105/205 or menzerna what do you recommend for porter cable 7424xp. should i use flat pads or the ones with holes which also would you recommend.thanks

For the Porter Cable 7424 polisher


Lake Country Backing Plate (http://www.autogeek.net/lc43125.html)
Lake Country Flat Pads (http://www.autogeek.net/lake-country-beveled-pad-kit.html)

Menzerna Products


Menzerna Bundle (http://www.autogeek.net/menzerna-polish-bundle3.html)

http://i153.photobucket.com/albums/s225/BobbyG53/Detailing/MenzernaChart3.jpg

[Largebore]

Depends on the paint you're working on

How about Jet Black on BMW ?

[Danube]

I found that working with Menzerna (500 and 1000) is much easier then with 105, so my vote goes to Menzerna here.

205 is one of the easiest products to work with that I ever used, so is Menzerna 2500 and 4000.

[atoy]

How about Jet Black on BMW ?


Try Finishing it with a black pad or ht crimson pad using sonax ntpc

[chefnick]

Depends on if your inside or outside.
The amount of defect you have to level.
I love the 105 but it dries fast and you can only do a small area at a time. I use the lake country hydro tech cyan pad and follow with a tangerine w 205 for a flawless finish.
lately ive been workin on a lot of mercedes so i switched to the new lake country hybrid pads but i use the flex and switched to Menzerna super intense which does the job for major swirls and 2000 grit sand marks but i always finish w 3000 grit 3m trizac, i use the blue heavy polish pad then i finish w the white hybrid w 205 then seal w that BLACKFIRE FIRE FIRE which to me is the awesomest sickest wet look yet.....plus i do alot of cquartz also on exotic or high end models.. hope this helped but i only use the PC for sealing w a crimson hydr tech pad , i use the FLEX 90% of my work unless major wetsanding like whole cars.....good luck and GOD BLESS