richy
04-26-2012, 08:53 PM
This is the car I mentioned in the teaser post the other day. To recap why I was so excited to do this car, it was from the era that my family was active in selling GM cars, namely Pontiac, Buick and GMC. I fondly remember driving Firebirds as demos that I ordered for myself. 1990 is also the year I got married, so that has sentimental value too. It is a one owner car with 64,000 km (40,000 miles) on the odometer and is obviously garage kept and well cared for.
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0025-2.jpg
Having said that, it is still 22 year old paint with all the issues that go with it. The owner only wanted the exterior done, but wanted it as nice as possible including the application of Opti Guard. Game on Baby!!
Here are some shots of what it looked like when it arrived. When you looked closely, there were a ton of stone chips all over the paint, and not just on the front end either. There was also a fresh, deep scuff on the passenger door and scratches on the roof from the glass roof removal. These are the issues I was dealing with:
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0003-6.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0004-6.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0006-6.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0008-5.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0009-5.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0010-5.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0011-4.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0012-4.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0013-3.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0014-2.jpg
Here is that scrape..what a shame!
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0017-1.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0018-1.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0019-1.jpg
The mirror was marked up too!
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0020-2.jpg
Love these wheels and tires! Time to improve on them!!
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0021-2.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0022-2.jpg
The black cut-outs by the lights needed some attention; they weren't scratched luckily, just faded. The trim on the hood was in some dire need of some UTTG!
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0023-2.jpg
First up was the wheels. They were sprayed with Carbrite wheel acid and agitated and then rinsed and sprayed with Zep Citrus for further cleaning and also for acid neutralization. The raised white letter tires (they look so cool!!) were heavily scrubbed with a stiff brush and Zep Purple. I also tried a magic eraser on the worse ones, but it didn't help that much...agitating with the brush did the best job for me.
The wells were cleaned with Zep Citrus.
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0027-2.jpg
Next the car was foamed with a strong mix of DG 901 followed by a Dawn wash. There did not seem to be any wax evident on the surface before, and there sure wasn't any after those 2 steps!
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0029-2.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0030-2.jpg
The car was then brought inside wet and was clayed using blue Riccardo. This is strong clay, and the paint needed it. I microwaved the piece for about 30 seconds before using it to make it as pliable as possible to reduce the marring it instilled. The clay still marred the paint, but what it was removing was worth the extra effort. Besides, I planned on compounding every square inch of the paint anyway!
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0031-2.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0032-1.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0033-1.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0034-1.jpg
There was also some staining in the paint. Something had run down and stained it in several places:
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0035-1.jpg
Next up was the paint chip filling. This step took a very long time. I spent a minimum of 1.5 hours going around the car filling in the chips and scratches. I used both a pointy toothpick and a micro brush depending on the size of the repair I was doing. I also attempted to clean up the bottom of the front lip the best I could as it was nasty from scraping up against a curb or two during its life. I wanted the paint to have as long a time to cure and harden as possible so I wanted to do this right away.
The wheels were next to get some attention. These are the original factory wheels which to me, just adds so much value to the car. Everything about it is original, down to the AM/FM, Cassette player. The washing took care of cleaning them up, but the gray inserts in the wheels were dull and needed some polishing. M105 was used with a mf and then buffed using a Mothers wheel cone and my drill. I've owned this cone for probably 4 or 5 years and this is the first time I used it. It did a good job. The rest of the face was done by hand with M105 and a mf. They were buffed off and then prepared with ERASER for the OG step. OG was applied with the block and suede mf method, my favourite. The tires were dressed with Opti Bond, neat. The wells were dressed with foaming tire spray.
To battle the paint, I started with the worse spot on the door. I went all around the car with the PTG. I was very curious what kind of readings I was going to get, which of course, would determine how I could proceed with how aggressive I could be compounding. Unfortunately for me, the door with the scrape was measuring high 80's to low 90's in that area. Not what I wanted to see!! I very gingerly started with my black wool tuff buff pad and M105 using very low speed and low to moderate pressure with my Dynabrade rotary, only working for seconds at a time. I was able to slowly get it better (I was constantly checking the readings!) but the paint was down to mid 80's...time to stop buffing! Wool was used where the paint was the worst. For the rest of the car, I used my Megs DA and a yellow B & S pad and M105. That was followed with a white B & S pad and M205. I followed that step up with a blue B & S pad and 85rd, and did the top surfaces with it. It was not making a huge difference, but still wanted the extra amp on the top surfaces.
Here are a few 50/50 shots. The first one is the door that was done, and the front fender not. (I should not even have to say that, LOL)
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0038-1.jpg
Another one on the rear 1/4 panel:
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0042-1.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0025-2.jpg
Having said that, it is still 22 year old paint with all the issues that go with it. The owner only wanted the exterior done, but wanted it as nice as possible including the application of Opti Guard. Game on Baby!!
Here are some shots of what it looked like when it arrived. When you looked closely, there were a ton of stone chips all over the paint, and not just on the front end either. There was also a fresh, deep scuff on the passenger door and scratches on the roof from the glass roof removal. These are the issues I was dealing with:
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0003-6.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0004-6.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0006-6.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0008-5.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0009-5.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0010-5.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0011-4.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0012-4.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0013-3.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0014-2.jpg
Here is that scrape..what a shame!
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0017-1.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0018-1.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0019-1.jpg
The mirror was marked up too!
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0020-2.jpg
Love these wheels and tires! Time to improve on them!!
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0021-2.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0022-2.jpg
The black cut-outs by the lights needed some attention; they weren't scratched luckily, just faded. The trim on the hood was in some dire need of some UTTG!
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0023-2.jpg
First up was the wheels. They were sprayed with Carbrite wheel acid and agitated and then rinsed and sprayed with Zep Citrus for further cleaning and also for acid neutralization. The raised white letter tires (they look so cool!!) were heavily scrubbed with a stiff brush and Zep Purple. I also tried a magic eraser on the worse ones, but it didn't help that much...agitating with the brush did the best job for me.
The wells were cleaned with Zep Citrus.
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0027-2.jpg
Next the car was foamed with a strong mix of DG 901 followed by a Dawn wash. There did not seem to be any wax evident on the surface before, and there sure wasn't any after those 2 steps!
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0029-2.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0030-2.jpg
The car was then brought inside wet and was clayed using blue Riccardo. This is strong clay, and the paint needed it. I microwaved the piece for about 30 seconds before using it to make it as pliable as possible to reduce the marring it instilled. The clay still marred the paint, but what it was removing was worth the extra effort. Besides, I planned on compounding every square inch of the paint anyway!
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0031-2.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0032-1.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0033-1.jpg
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0034-1.jpg
There was also some staining in the paint. Something had run down and stained it in several places:
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0035-1.jpg
Next up was the paint chip filling. This step took a very long time. I spent a minimum of 1.5 hours going around the car filling in the chips and scratches. I used both a pointy toothpick and a micro brush depending on the size of the repair I was doing. I also attempted to clean up the bottom of the front lip the best I could as it was nasty from scraping up against a curb or two during its life. I wanted the paint to have as long a time to cure and harden as possible so I wanted to do this right away.
The wheels were next to get some attention. These are the original factory wheels which to me, just adds so much value to the car. Everything about it is original, down to the AM/FM, Cassette player. The washing took care of cleaning them up, but the gray inserts in the wheels were dull and needed some polishing. M105 was used with a mf and then buffed using a Mothers wheel cone and my drill. I've owned this cone for probably 4 or 5 years and this is the first time I used it. It did a good job. The rest of the face was done by hand with M105 and a mf. They were buffed off and then prepared with ERASER for the OG step. OG was applied with the block and suede mf method, my favourite. The tires were dressed with Opti Bond, neat. The wells were dressed with foaming tire spray.
To battle the paint, I started with the worse spot on the door. I went all around the car with the PTG. I was very curious what kind of readings I was going to get, which of course, would determine how I could proceed with how aggressive I could be compounding. Unfortunately for me, the door with the scrape was measuring high 80's to low 90's in that area. Not what I wanted to see!! I very gingerly started with my black wool tuff buff pad and M105 using very low speed and low to moderate pressure with my Dynabrade rotary, only working for seconds at a time. I was able to slowly get it better (I was constantly checking the readings!) but the paint was down to mid 80's...time to stop buffing! Wool was used where the paint was the worst. For the rest of the car, I used my Megs DA and a yellow B & S pad and M105. That was followed with a white B & S pad and M205. I followed that step up with a blue B & S pad and 85rd, and did the top surfaces with it. It was not making a huge difference, but still wanted the extra amp on the top surfaces.
Here are a few 50/50 shots. The first one is the door that was done, and the front fender not. (I should not even have to say that, LOL)
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0038-1.jpg
Another one on the rear 1/4 panel:
http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/DSC_0042-1.jpg