PDA

View Full Version : can i go straight from m105 to p085rd?



s500
04-14-2012, 06:44 PM
can i go straight from m105 to p085rd?

SonOfOC
04-14-2012, 06:52 PM
Not recommended, but you can. It will really depend on what 105 leaves behind. On some paints, 105 can do a very good impression of a fine polish. Just don't expect 85rd/SF4500 to remove anything more than light swirls and hazing. Best to use something in between 105 and 85rd/SF4500

s500
04-14-2012, 07:44 PM
what should i use in between

fairlady350z
04-14-2012, 07:53 PM
I would use m105 then m205 then whatever you want after

Shane731
04-14-2012, 09:08 PM
It really will depend on the paint. Do a test spot and go from there. I actually did that combo the first time I ever polished a car (which was my own car): M105 followed by PO85rd. I tried to finish with both M205 and Optimum Finishing Polish but neither one was cleaning up the hazing left by M105. PO85rd did the trick. But definitely do a test spot and then see where you stand from there.

http://www.autogeekonline.net/forum/show-n-shine/24229-95-olds-cutlass-ciera-detailed-meguiar-s-menzerna-wolfgang.html

A.P.A.D.
04-14-2012, 10:21 PM
only if in your test spot it achieves the goals you wish to achieve. i prefer M205 after the M105 though.

in other words, do you test spot and report back with the results!



Edit: Oops! or just like what Shane said above! didnt read the comments before responding. =)