View Full Version : got polish on rubber
goldenlight
04-09-2012, 03:52 PM
Ok first time polishing and got some polish on rubber seams near sun roof. Is there a way to remove this?
van185
04-09-2012, 04:00 PM
Duragloss Wax Eraser (WE) #481 it does better than most products that I have tried.
Mike Phillips
04-09-2012, 04:01 PM
Ok first time polishing and got some polish on rubber seams near sun roof. Is there a way to remove this?
At least it's a rubber gasket versus a fuzzy gasket like this,
http://www.autogeekonline.net/gallery/data/1257/94PorscheCTW06.jpg
http://www.autogeekonline.net/gallery/data/1257/94PorscheCTW07.jpg
It's usually not easy and almost impossible to remove 100% of the staining effect, that's why so many people take the time up-front to tape-off a car.
You can try a spray detailer and a microfiber, a spray detailer and a little Isopropyl Alcohol, a microfiber and an all purpose cleaner, heck you can even use a clean microfiber towel and a little water.
You can try a nylon brush like a tooth brush...
There are some products for removing polishes and waxes off of paint that you could also use with a microfiber towel
You can try washing the car and lightly scrubbing the stained trim with a wash mitt or microfiber towel.
It's a tough problem. Someone on the UK website Detailing World recently asked me why I like to work on classics and hotrods and part of my answer is because they have no rubber, vinyl or plastic trim.
Sometimes they have no trim at all... I still do things like cover the tires and the grill, especially if I'm using a rotary buffer.
Bumblebee - Testing out the NEW DeWALT DWP849X (http://www.autogeekonline.net/forum/off-topic/37831-bumblebee-testing-out-new-dewalt-dwp849x.html)
This custom 1949 Sedan Delivery has zero trim to tape off or worry about getting residue onto...
http://www.autogeekonline.net/gallery/data/1202/49SedanDelivery0013.jpg
Wheel Maskers on the wheels and tires, I'll clean and dress these later...
http://www.autogeekonline.net/gallery/data/1202/49SedanDelivery0014.jpg
:xyxthumbs:
DdeRonde
04-09-2012, 04:53 PM
I have had luck with Windex and a toothbrush. Then tape and re polish the area.
Sent from my ADR6300 using AG Online
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.