PDA

View Full Version : rotary hologram correction...


Pages : [1] 2
Dan C
03-24-2012, 01:19 PM
steps you take using your flex 3401 to get finish back hologram free are.....Feed back please
Rsurfer
03-24-2012, 01:52 PM
Are you getting holo's with a DA:confused:
steps you take using your flex 3401 to get finish back hologram free are.....Feed back please
Dan C
03-24-2012, 02:23 PM
No just after using rotary initial 1st cut with compound!
Are you getting holo's with a DA:confused:
Kaban
03-24-2012, 04:28 PM
use any type of polish or swirl remover on an orange pad or something with even less cut. DA will remove the holograms no matter what combo you use, even if you use a yellow with compound.
Rsurfer
03-24-2012, 04:45 PM
Finish down with a finer polish and you won't need a DA.
No just after using rotary initial 1st cut with compound!
Kaban
03-24-2012, 04:50 PM
Finish down with a finer polish and you won't need a DA.

exactly. that's an even better option than i suggested.
Kaban
03-24-2012, 04:51 PM
use 106FA or 85rd and guaranteed no holograms...
Dan C
03-24-2012, 09:16 PM
Who makes 106FA?
use 106FA or 85rd and guaranteed no holograms...
rider9195
03-24-2012, 09:22 PM
Who makes 106FA?

Menzerna. It is the same thing as 85rd just with twice the abrasives for more polishing power.
Danube
03-24-2012, 11:17 PM
use 106FA or 85rd and guaranteed no holograms...


No holograms with 106 with rotary at all?
Dan C
03-24-2012, 11:34 PM
I too find this hard to believe...since it says it will remove 2500 grit sanding scratches
Kaban
03-24-2012, 11:38 PM
No holograms with 106 with rotary at all?

nope not with a polishing or finishing pad. never tried it with a heavy cutting pad which you probably shouldn't be doing anyway
Kaban
03-24-2012, 11:39 PM
I too find this hard to believe...since it says it will remove 2500 grit sanding scratches

just try it man. why would i make that up? its not like I am paid by menzerna to go around spreading bs on the forums
Dan C
03-25-2012, 12:05 AM
Had some meguiars swirl free polish laying around so I ran my buffer over it with both polish and finishing foam pads...no swirls, yet didn't wipe finish down with alcohol so we will see later!
Dan C
03-25-2012, 01:20 PM
If I had a Flex 3401,I would definitely do final polishing step with it to ensure not even a faint hologram could be detected period!