opie_7afe
03-10-2012, 12:45 AM
so ive been wanting to try iron-x ever since i noticed some black dots and such that would not remove with clay,polishing, cleaners. ect ect. I've tried a lot and still was no go and they remained. so i finally got some iron x and used it on the rear for a test. plan to do the whole car soon just wanted to test it. so i was amazed on how quick it started to work. also realized i need to polish behind my license plate!. anyways the process i used was this;
Wash with CG citrus wash and gloss, used my soap dispenser on the pressure washer for a presoak, sadly that did not remove my 845/m16 protection with high dilution as i was wanting to do a coat or 2 of WGDGPS. then i dried the car and sprayed on the iron-x. mixed up a small bucket of CG citrus wash and gloss and got out a nice boars hair brush, and let iron-x soak for 20 minutes making sure it did not dry. then i used the brush and wash solution to lightly agitate the iron, while i did this the iron-x still continued to work which i found cool, so went over the spots again and rinsed and dried the car then did a coat of some mothers reflections top-coat good product also. results were, black spots gone and iron removed!. really surprised the iron-x still continued to work after using the brush on the area i sprayed. but anyways iron x- works awesome. this is not really a review just sharing some pics of iron-x working on single stage paint and share my experience with it. onto the pictures!
just sprayed on :
http://www.autogeekonline.net/gallery/data/500/medium/100_1585.JPG
2 minutes later:
http://www.autogeekonline.net/gallery/data/500/medium/100_1586.JPG
7 minutes later:
http://www.autogeekonline.net/gallery/data/500/medium/100_1589.JPG
10 minutes later:
http://www.autogeekonline.net/gallery/data/500/medium/100_1590.JPG
20 minutes later:
http://www.autogeekonline.net/gallery/data/500/medium/100_15921.JPG
enjoy the bleeding!Im the MAN
Wash with CG citrus wash and gloss, used my soap dispenser on the pressure washer for a presoak, sadly that did not remove my 845/m16 protection with high dilution as i was wanting to do a coat or 2 of WGDGPS. then i dried the car and sprayed on the iron-x. mixed up a small bucket of CG citrus wash and gloss and got out a nice boars hair brush, and let iron-x soak for 20 minutes making sure it did not dry. then i used the brush and wash solution to lightly agitate the iron, while i did this the iron-x still continued to work which i found cool, so went over the spots again and rinsed and dried the car then did a coat of some mothers reflections top-coat good product also. results were, black spots gone and iron removed!. really surprised the iron-x still continued to work after using the brush on the area i sprayed. but anyways iron x- works awesome. this is not really a review just sharing some pics of iron-x working on single stage paint and share my experience with it. onto the pictures!
just sprayed on :
http://www.autogeekonline.net/gallery/data/500/medium/100_1585.JPG
2 minutes later:
http://www.autogeekonline.net/gallery/data/500/medium/100_1586.JPG
7 minutes later:
http://www.autogeekonline.net/gallery/data/500/medium/100_1589.JPG
10 minutes later:
http://www.autogeekonline.net/gallery/data/500/medium/100_1590.JPG
20 minutes later:
http://www.autogeekonline.net/gallery/data/500/medium/100_15921.JPG
enjoy the bleeding!Im the MAN