merc E Class 320

[extreme-detail]

well today i had a 55 plate e class with a few defects in the paint as you can see bellow
http://i13.photobucket.com/albums/a253/xtrememike_/mercEclass001.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/mercEclass002.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/mercEclass003.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/mercEclass006.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/mercEclass008.jpg
so now to sort out the defects with the PRO menzerna power gloss with the makita and megs polishing pad
some pics of after the power gloss
http://i13.photobucket.com/albums/a253/xtrememike_/mercEclass016.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/mercEclass017.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/mercEclass020.jpg
so next was for the menzerna finishing polish PO106 FF with a meg`s finishing pad on the makita
then went for the zymol HD clense
then out with the Zymol Titanium Glaze using my bare hands
for the wheels they were polished with meg`s #82 then treated with some meg`s #16 and the tyres got some meg`s to
glass was polished with AG glass polish using the cyclo
http://i13.photobucket.com/albums/a253/xtrememike_/mercEclass023.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/mercEclass026.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/mercEclass027.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/mercEclass024.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/mercEclass034.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/mercEclass038.jpg
hope u like and thanks for looking

[Bobjones]

Nice very nice, why the titanium on this car???

Absolutely huge change though!!!!

Also how come you use the higher cut 106FF over the 85RD??? (Want to know your thoughts of the difference if any between the two)

Also the Power Gloss has such a high cut i would have thought a light cutting pad with the 85RD3.0 (or IP I thik you call it)would have been more appropriate on light/medium marks???

Just after some feedback as I love using Menzerna gear and not many people provide alot of info on it on here!!! Also I have never used the Power Gloss, have always just used the 85RD3.0 with a medium cut pad at worst followed by the 85RD IP on a polishing pad and in some instances followed by the Liquid Wax with good results (ie when a sealant and wax is not wanted).

[extreme-detail]

Nice very nice, why the titanium???

Also how come you use the higher cut 106FF over the 85RD???

Also the Power Gloss has such a high cut i would have thought a light cutting pad with the 85RD3.0 would have been more appropriate on light/medium marks???

Just after some feedback as I love using Menzerna gear and not many people provide alot of info on it on here!!!

used the titanium as this is wax does last long as this merc gets used alot

i find 106FF gives gives a better finish

the paint on the merc is rock hard and did try the 85RD3.0 and couldn`t look at it so i finally went for the power gloss

[Bobjones]

Do you use the non OEM (ceramicoat) polished from Menz at all???

Might get me some of the Power Gloss and maybe some 106FF and compare on some cars.