Help with REMOVING LAYER of paint spray

[Wills.WindowsAndWheels]

This isn't my car or even my client, but someone on another forum has a Vette and was doing some spraying to tint the markers on the front and apparently used too much paint and it seeped through. http://img.photobucket.com/albums/v441/sskillz/Z0%20NO/vettepaint2.jpg

You can see it there, the black. Clay wouldn't remove when he tried it.
Now i KNOW there is some company, their logo is like a wizard or something, that can make up a special batch of chemical to remove whatever it is you're trying to get off.

I cant remember the name of the place, but figured they might be this guys best bet since clay isnt working and since this paint is ina very difficult area where the clear is probably pretty thin. Some guys on the other forum suggested lacquer thinner, but i thought that would be a bit harsh.

Suggestions?

[embolism]

I'm speculating here so take it for what it's worth:

if clay isn't touching it and it doesn't feel rough like regular overspray that might be damage from the solvent in the paint. Might have to wetsand but you could try taking a magic eraser to it.

It's like the equivalent of 4000 grit I think.

[monito]

Polish it. It Works for me


P@