Live Video Stream this Saturday and Sunday

[slickooz]

Thanks AG team!!!

[silvermesa]

Enjoyed watching the class today and plan on watching tomorrow as well!

It was good to see both the aztec and mytee extractors clean the cloth bench seat. The tornador seemed to work well with the tasks given it.

Thank you Autogeek for allowing others who could not make the trip watch for a bit!!!:)

[Light]

Enjoyed watching the class today and plan on watching tomorrow as well!

It was good to see both the aztec and mytee extractors clean the cloth bench seat. The tornador seemed to work well with the tasks given it.

Thank you Autogeek for allowing others who could not make the trip watch for a bit!!!:)

+1

Thanks AG!

[Mike Phillips]

Setting up for Day 2

Today we're going to use the Optimum and Meguiar's Microfiber Pads Systems on the Corvette with DA Polishers to remove the swirls and then seal the paint with Opti-Coat.

Here's the paint on the Vette before the class...

http://www.autogeekonline.net/gallery/data/1374/1DetailBootCamp004.jpg


Some kind of contaminants all over the paint, some have a rush color to them, should be perfect for the Iron-X demonstration.
http://www.autogeekonline.net/gallery/data/1374/1DetailBootCamp010.jpg

http://www.autogeekonline.net/gallery/data/1374/1DetailBootCamp011.jpg


Some kind of stain spots all over the paint...
http://www.autogeekonline.net/gallery/data/1374/1DetailBootCamp012.jpg



And of course swirls...
http://www.autogeekonline.net/gallery/data/1374/1DetailBootCamp013.jpg

http://www.autogeekonline.net/gallery/data/1374/1DetailBootCamp014.jpg


We ended Saturday by washing and claying the exterior and here's how it looks in the garage right now...

http://www.autogeekonline.net/gallery/data/1374/1DetailBootCamp071.jpg


So first thing today we'll finish this Corvette using the Meguiar's and the Optimum Microfiber pads and matching products.


Wetsanding, Cutting and Buffing
While the everyone cycles through working on the Corvette we'll also have dampsanding and rotary buffer stations set up on black practice hoods.

http://www.autogeekonline.net/gallery/data/1122/Ma15class004.jpg


We'll be using the same hood I used in this article and anyone that wants to try to create a swirl free finish using only a rotary buffer is welcome to try.

Hologram Free with a Rotary Buffer (http://www.autogeekonline.net/forum/auto-detailing-101/43684-hologram-free-rotary-buffer.html)

http://www.autogeekonline.net/gallery/data/1332/HologramFree02.jpg



1949 Chevrolet Carryall Extreme Makeover
After the Vette is finished we tackle the 1949 Chevrolet Carryall using Pinnacle Polishes and Flex Polishers plus PC's, Megs and Griot's DA Polishers.

http://www.autogeekonline.net/gallery/data/1374/1DetailBootCamp035.jpg



All the paint on the Carryall looks like this...

http://www.autogeekonline.net/gallery/data/1374/1DetailBootCamp036.jpg



And sometime around noon today Yancy will be here to broadcast the class live!


Time to go set up for today's Detail Boot Camp Class!


:buffing:

[Yancy]

Getting set up for the feed, stay tuned

[LegacyGT]

Getting set up for the feed, stay tuned

:work:

Thanks Yancy :)

[Yancy]

Ok going live

[DealerDetailer]

Thank you!

[LegacyGT]

Ok going live

I see people

It's a bit skippy, and everyone has been inhaling too much helium

[DealerDetailer]

I see people

It's a bit skippy, and everyone has been inhaling too much helium

I second all that. LOL Very funny sounding

[Yancy]

K having some technical issues please bare with me, lol camera going 2x and sounds like chipmunks lol

[Yancy]

Having to restart server, back in a few

[Yancy]

Ok we are back that was funny

[DealerDetailer]

working much better now! :dblthumb2:

[Yancy]

Yeah the server was encoding in 2x speed chipmunks detailing lol