DG 501 and Megs 205

[Meticulous-Detail]

I like to experiment with combining products. Anyone ever combine DG 501 and Megs 205 on a white polishing pad? Just curious how well these would work together. Should I even attempt this combo? Maybe at 2 dots each per panel.

Thoughts?

[dougaross]

I like to experiment with combining products. Anyone ever combine DG 501 and Megs 205 on a white polishing pad? Just curious how well these would work together. Should I even attempt this combo? Maybe at 2 dots each per panel.

Thoughts?


I have read of mixing Mernz 106ff or SIP. You may want to use matching abrasive. 501 is DAT where 205 is SMAT. The mernz products are DAT

[Meticulous-Detail]

I have read of mixing Mernz 106ff or SIP. You may want to use matching abrasive. 501 is DAT where 205 is SMAT. The mernz products are DAT

Good point on the DAT/SMAT.

[dad07]

I used a 1:1 mix of m105/d300 with mf cutting pad and did some serious correction in 2-3 passes and it finished lsp ready.

[Meticulous-Detail]

I used a 1:1 mix of m105/d300 with mf cutting pad and did some serious correction in 2-3 passes and it finished lsp ready.

Good to know, I have 105/d300 and the MF cutting discs too.

[Jacob Perry]

Sorry but whats dg 501? im not used to the short term on here yet.

[Setec Astronomy]

Duragloss 501

[rwright]

If you're looking for more cut just go with Duragloss #671 Swirl Mark Remover.