Your Favorite Spray Wax is Now Available In a New Size!

[Nick McKees37]

http://www.autogeekonline.net/nick/January/XMT-1232.gif (http://www.autogeek.net/xmt-360-spray-wax-32oz.html)


Your favorite spray wax - Pinnacle XMT 360 Spray Wax - is available in a new size! In addition to the 12 oz. spray, half gallon and gallon size refills, Pinnacle XMT 360 Spray Wax is now available in a 32 oz. spray!



http://www.autogeekonline.net/nick/XMT%20360%20Spray%20Wax/AshleyXMT3.JPG (http://www.autogeek.net/xmt-360-spray-wax-32oz.html)


The new formula Pinnacle XMT 360 Spray Wax is now loaded with advanced UVA and UVB absorbers that provide increased protection against the sun's rays. In addition to the more advanced protection, the new formula also contains additional gloss enhancers for an even better shine than before.

New Formula Pinnacle XMT Spray Wax Impresses (http://www.autogeekonline.net/forum/new-car-care-products/43168-new-formula-pinnacle-xmt-spray-wax-impresses.html)

Pinnacle XMT 360 Spray Wax (http://www.autogeek.net/xmt-360-spray-wax-32oz.html)

[ScottB]

This is on my short list of "must try" products ...

[BobbyG]

I tried it and bought 1/2 gallon so I wouldn't run out!

It goes on nicely and buffs to a beautiful shine. One thing I've noticed is that after is dries for lets say 10 minutes or so it becomes super slick to the touch. This also may be the case because I'm applying it at 55 degrees...

Good stuff this new formulation!! :props:

PS....Nick, why don't you give Scott some to try...

[alko]

I LOVE this stuff!!!!!

[SonOfOC]

I gotta give XMT another shot. Did not "wow" me the first go around.
Alko/BobbyG, what are you guys spraying over and what color car?

I sprayed it over C845 and it was okay. I sprayed it over BFWD and WGPS and it looked a little better.

[alko]

I got a layer of collinite 915 topped with swissvax concorso. I have black Acura TSX.

[BobbyG]

I spray it on,

1999 Dodge Dakota - Silver with a driftwood clear coat
2003 Toyota Camry XLT - Silver
2011 Hyndai Elantra - Midnight Black

All have sealants and a final coat of wax.

You have to be a little more careful with darker colors especially if there's not much protection on them otherwise you may see some streaking.

The only time I ever got streaks was when my towel had too much product on it to buff it in efficiently.

Basically, just spread it over the panel with one towel and buff till clear with a second towel and they'll be none. Trying to use a single towel to apply and buff is what my problem was initially.

If you do get some streaking, simply mist on the towel (instead of the car) and wipe on and buff off immediately. Work a small section at a time and it will remove streaking. I tend to apply to the towel anyways just to avoid streaking.

[Finemess]

I use the old formula over XMT 360 as a pick-me-up, works very well.

[DaHen]

Was able to wash the green Altima yesterday when the weather got up into the forties. This time I remembered to grab the spray wax instead of XMT's Final Finish Instant Detailer like I did last month when I wanted to use the spray wax on the gray Altima.
I used a few Cobra Gold Plush Microfiber towels and found that the spray wax went on nice and buffed to a brilliant shine. Had applied Fuzion on this green Altima last October.

Glad to see that the larger spray bottle has a better sprayer on it. Ya can wear out your finger with the twelve ounce bottles.:xyxthumbs:

[Dr Oldz]

I like this style sprayer much better than the pump style on the 16oz.

[alko]

I spray it on,

1999 Dodge Dakota - Silver with a driftwood clear coat
2003 Toyota Camry XLT - Silver
2011 Hyndai Elantra - Midnight Black

All have sealants and a final coat of wax.

You have to be a little more careful with darker colors especially if there's not much protection on them otherwise you may see some streaking.

The only time I ever got streaks was when my towel had too much product on it to buff it in efficiently.

Basically, just spread it over the panel with one towel and buff till clear with a second towel and they'll be none. Trying to use a single towel to apply and buff is what my problem was initially.

If you do get some streaking, simply mist on the towel (instead of the car) and wipe on and buff off immediately. Work a small section at a time and it will remove streaking. I tend to apply to the towel anyways just to avoid streaking.

:iagree: I use two towels when applying the XMT 360 spray wax. I use the blue rolled edge MF towels but I use the short nap side. I'll prime the towel with a couple of squirts and then spray the section I'm working on. I apply to small sections at a time. I'll use the purple plush MF towel with the long nap side to buff off. I move slow and take my time and use hardly any pressure. Alot of people say that their towels are bunching up when they apply the stuff. I've come to the conclusion that their issue may be either too much pressure, or their LSP is either "fading away" or there wasn't one on to begin with. I wouldn't necessarily apply this to paint that doesn't have an LSP on it.

[Jeff120]

Nice and even more economical! If you havent tried this yet add it to your next order.

[tw33k2514]

Excellent!

Love that you put a good sprayer on it as well!

[PPLd]

I agree, the old pump style is not that appealing.
hopefully 32oz is a bit more economical to buy as well. the original size is 12oz and is quite expensive actually ;)

[shoeless89]

You said its my favorite but I haven't tried it yet . . . maybe it should be in the free sample section :)