M0nk3y
12-19-2011, 03:56 PM
Well, it's about time :excited:
Car has been severely neglected from any proper washing technique. There was holograms all over the car, not to mention the PO had a clear bra installed and the installer actually cut the clear bra on the car, and CUT INTO THE PAINT!!!
Needless to say, I had my work up for me. I wasn't going for 100% correction, because with the amount of damage done, I knew it was going to be too much time, I looked at around 90-95%.
Products Used:
Wash:
Chemical Guys Citrus Wash and Gloss
2800 PSI Pressure Washer
2 Bucket Method
IronX
Clay:
Poorboys Clay
CG QD
Correction:
Makita 9227c
PC DA
M105
M205
LCC HydroPads
Protection:
Wolfgang 3.0 Paint Sealant
Dodo Juice Hardy Candy
Dodo Juice Rainforest Rub
Wheels:
Meguiars APC+
Poorboys Wheel Sealant
Meguiars Endurance Tire Gel
Exhaust:
Wheel Wax Metal Polish
Steel Wool #0000
Poorboys Wheel Sealant
Onto the Pictures!
Removing Clear Bra
http://img822.imageshack.us/img822/1906/dsc0002lgm.jpg
You can see the damage done from the clear bra
http://img13.imageshack.us/img13/4485/dsc0003qr.jpg
Clear Bra Gone! Bye Bye Yellow!
http://img638.imageshack.us/img638/5020/dsc0004mv.jpg
Another Picture of the Clear Bra Installed Damage
http://img408.imageshack.us/img408/8845/dsc0005rd.jpg
Wash!
http://img502.imageshack.us/img502/7797/dsc0010ln.jpg
IronX doing it's job, it's bleeding!
http://img197.imageshack.us/img197/3119/dsc0011jb.jpg
http://img827.imageshack.us/img827/5058/dsc0012xx.jpg
IronX making the clay process pretty easy...barely nothing coming off the hood
http://img209.imageshack.us/img209/1228/dsc0017j.jpg
Correction Time!
http://img3.imageshack.us/img3/6866/dsc0023hm.jpg
Close Your Eyes, this is scary
http://img839.imageshack.us/img839/2995/dsc0022yb.jpg
http://img851.imageshack.us/img851/9356/dsc0025nh.jpg
http://img36.imageshack.us/img36/2710/dsc0030uh.jpg
http://img831.imageshack.us/img831/194/dsc0031bw.jpg
http://img812.imageshack.us/img812/7737/dsc0034vp.jpg
Correction Done!
http://img209.imageshack.us/img209/4232/dsc0079p.jpg
http://img215.imageshack.us/img215/710/dsc0080kw.jpg
http://img846.imageshack.us/img846/782/dsc0081hs.jpg
http://img819.imageshack.us/img819/411/dsc0083ms.jpg
http://img713.imageshack.us/img713/8725/dsc0084ky.jpg
Final Shots
http://img269.imageshack.us/img269/8281/dsc0051cf.jpg
http://img847.imageshack.us/img847/188/dsc0052uy.jpg
http://img221.imageshack.us/img221/3973/dsc0053dr.jpg
http://img40.imageshack.us/img40/1223/dsc0054dz.jpg
http://img828.imageshack.us/img828/1210/dsc0055k.jpg
http://img710.imageshack.us/img710/4317/dsc0056tz.jpg
http://img851.imageshack.us/img851/1284/dsc0057sn.jpg
http://img69.imageshack.us/img69/9053/dsc0058gl.jpg
http://img841.imageshack.us/img841/6322/dsc0059fh.jpg
http://img62.imageshack.us/img62/7498/dsc0060xp.jpg
http://img52.imageshack.us/img52/1529/dsc0061ke.jpg
Car has been severely neglected from any proper washing technique. There was holograms all over the car, not to mention the PO had a clear bra installed and the installer actually cut the clear bra on the car, and CUT INTO THE PAINT!!!
Needless to say, I had my work up for me. I wasn't going for 100% correction, because with the amount of damage done, I knew it was going to be too much time, I looked at around 90-95%.
Products Used:
Wash:
Chemical Guys Citrus Wash and Gloss
2800 PSI Pressure Washer
2 Bucket Method
IronX
Clay:
Poorboys Clay
CG QD
Correction:
Makita 9227c
PC DA
M105
M205
LCC HydroPads
Protection:
Wolfgang 3.0 Paint Sealant
Dodo Juice Hardy Candy
Dodo Juice Rainforest Rub
Wheels:
Meguiars APC+
Poorboys Wheel Sealant
Meguiars Endurance Tire Gel
Exhaust:
Wheel Wax Metal Polish
Steel Wool #0000
Poorboys Wheel Sealant
Onto the Pictures!
Removing Clear Bra
http://img822.imageshack.us/img822/1906/dsc0002lgm.jpg
You can see the damage done from the clear bra
http://img13.imageshack.us/img13/4485/dsc0003qr.jpg
Clear Bra Gone! Bye Bye Yellow!
http://img638.imageshack.us/img638/5020/dsc0004mv.jpg
Another Picture of the Clear Bra Installed Damage
http://img408.imageshack.us/img408/8845/dsc0005rd.jpg
Wash!
http://img502.imageshack.us/img502/7797/dsc0010ln.jpg
IronX doing it's job, it's bleeding!
http://img197.imageshack.us/img197/3119/dsc0011jb.jpg
http://img827.imageshack.us/img827/5058/dsc0012xx.jpg
IronX making the clay process pretty easy...barely nothing coming off the hood
http://img209.imageshack.us/img209/1228/dsc0017j.jpg
Correction Time!
http://img3.imageshack.us/img3/6866/dsc0023hm.jpg
Close Your Eyes, this is scary
http://img839.imageshack.us/img839/2995/dsc0022yb.jpg
http://img851.imageshack.us/img851/9356/dsc0025nh.jpg
http://img36.imageshack.us/img36/2710/dsc0030uh.jpg
http://img831.imageshack.us/img831/194/dsc0031bw.jpg
http://img812.imageshack.us/img812/7737/dsc0034vp.jpg
Correction Done!
http://img209.imageshack.us/img209/4232/dsc0079p.jpg
http://img215.imageshack.us/img215/710/dsc0080kw.jpg
http://img846.imageshack.us/img846/782/dsc0081hs.jpg
http://img819.imageshack.us/img819/411/dsc0083ms.jpg
http://img713.imageshack.us/img713/8725/dsc0084ky.jpg
Final Shots
http://img269.imageshack.us/img269/8281/dsc0051cf.jpg
http://img847.imageshack.us/img847/188/dsc0052uy.jpg
http://img221.imageshack.us/img221/3973/dsc0053dr.jpg
http://img40.imageshack.us/img40/1223/dsc0054dz.jpg
http://img828.imageshack.us/img828/1210/dsc0055k.jpg
http://img710.imageshack.us/img710/4317/dsc0056tz.jpg
http://img851.imageshack.us/img851/1284/dsc0057sn.jpg
http://img69.imageshack.us/img69/9053/dsc0058gl.jpg
http://img841.imageshack.us/img841/6322/dsc0059fh.jpg
http://img62.imageshack.us/img62/7498/dsc0060xp.jpg
http://img52.imageshack.us/img52/1529/dsc0061ke.jpg