BorisC
12-12-2011, 04:35 PM
XMT 360 is proving to be a great AIO for me, especially since I’ve doing more & more production / dealership work. I’ve been getting amazing results w/ this product. It’s also perfect for the DD customer that just wants the clean, shiny car or sprucing up your own vehicle.
I bought this when it was on BOGO sometime back. Used it occasionally but never gave it much thought. Being an XMT fan & after being one of the lucky winners of the new formulas of 360 spray wax & shampoo I decided to revisit w/ this product some more.
If you’re looking for a completely swirl free showroom finish, this is not the product you want. But it removes quite a bit more than you would expect & will give a nice clean, glossy finish.
I guess it can be a bit costly to use. As much as $1.33/oz for the 12oz size at regular price. But at the moment it is on sale so you can get the 32oz size for $22 bringing it down to .69/oz. (Hopefully AG will make this the regular price ;)) Since it saves me a bunch of time & I’m able to use it out in the sun w/o issue, it’s worth it to me.
32 oz. XMT 360™ Corrects, Cleans, Seals (http://www.autogeek.net/fco32ozxmt36.html)
Here are some pics of results I’ve been able to achieve using XMT 360 w/ a LC CCS Orange pad. I use either the Flex 3401 or PC.
2008 Kia Sorento - using Flex 3401
http://www.autogeekonline.net/forum/picture.php?albumid=335&pictureid=2070
http://www.autogeekonline.net/forum/picture.php?albumid=335&pictureid=2069
Nissan Versa - Used the PC on this. The paint on this car was essentially flat & dead. Similar to what Mike Phillips had here. http://www.autogeekonline.net/forum/show-n-shine/30979-kiss-detail-extreme-makeover-toyota-highlander.html - I wish I had more pics of this but the keys were MIA, the sun was low, etc. (Pic is 50/50 of roof)
http://www.autogeekonline.net/forum/picture.php?albumid=335&pictureid=2076
08 Honda Accord (hood) - I did this the same way as the others w/ the PC, but I did finish it w/ the new XMT 360 spray wax.
http://www.autogeekonline.net/forum/picture.php?albumid=335&pictureid=2074
I like the way you can see the barbed wire in the center/top of pic.
http://www.autogeekonline.net/forum/picture.php?albumid=335&pictureid=2075
I'll be experimenting more with this but it's quickly becoming one of my goto products for production type work. Thanks for looking.
I bought this when it was on BOGO sometime back. Used it occasionally but never gave it much thought. Being an XMT fan & after being one of the lucky winners of the new formulas of 360 spray wax & shampoo I decided to revisit w/ this product some more.
If you’re looking for a completely swirl free showroom finish, this is not the product you want. But it removes quite a bit more than you would expect & will give a nice clean, glossy finish.
I guess it can be a bit costly to use. As much as $1.33/oz for the 12oz size at regular price. But at the moment it is on sale so you can get the 32oz size for $22 bringing it down to .69/oz. (Hopefully AG will make this the regular price ;)) Since it saves me a bunch of time & I’m able to use it out in the sun w/o issue, it’s worth it to me.
32 oz. XMT 360™ Corrects, Cleans, Seals (http://www.autogeek.net/fco32ozxmt36.html)
Here are some pics of results I’ve been able to achieve using XMT 360 w/ a LC CCS Orange pad. I use either the Flex 3401 or PC.
2008 Kia Sorento - using Flex 3401
http://www.autogeekonline.net/forum/picture.php?albumid=335&pictureid=2070
http://www.autogeekonline.net/forum/picture.php?albumid=335&pictureid=2069
Nissan Versa - Used the PC on this. The paint on this car was essentially flat & dead. Similar to what Mike Phillips had here. http://www.autogeekonline.net/forum/show-n-shine/30979-kiss-detail-extreme-makeover-toyota-highlander.html - I wish I had more pics of this but the keys were MIA, the sun was low, etc. (Pic is 50/50 of roof)
http://www.autogeekonline.net/forum/picture.php?albumid=335&pictureid=2076
08 Honda Accord (hood) - I did this the same way as the others w/ the PC, but I did finish it w/ the new XMT 360 spray wax.
http://www.autogeekonline.net/forum/picture.php?albumid=335&pictureid=2074
I like the way you can see the barbed wire in the center/top of pic.
http://www.autogeekonline.net/forum/picture.php?albumid=335&pictureid=2075
I'll be experimenting more with this but it's quickly becoming one of my goto products for production type work. Thanks for looking.