Oops...845 too thick

[Ryan R]

its just one of those days. Ay yi yi
If I've read correctly in my searching... go over again with a thin layer,let dry,and wipe?
It's on black and not wiping off

[tw33k2514]

Personally I'd spray some QD to help with removal. Never heard of the other way, but it should work also.

[Ryan R]

I thought of using my ONR QD mix but went ahead and threw on an LC red pad with a small amount.
Applying and wiping off right away (1 panel at a time) and its working like a charm.
Hopefully this helps if anyone runs into this problem in the future

[tw33k2514]

Glad you got it worked out. It's crazy how little 845 it actually takes to do a panel.

[Ryan R]

Glad you got it worked out. It's crazy how little 845 it actually takes to do a panel.

Heck yea man..well now its got 3 layers of 845 lol...got a little too crazy with the second coat

[shoeless89]

Product removes product

[bobble]

Yep product will remove product, spritz a little distilled water on it also to help removal.

Prsonally I just prime my red pad and can do probably half a vehicle with the amount used simply to prime, I've never measured but I'd guess I only use an ounce per application.

[CEE DOG]

How long since you applied it?? If it has been less than an hour let it sit a bit longer and then it will come off. My experience the time I applied to thick anyway...

[05xrunner]

I have had 845 do this to me a few times..it wipes off then there is a hazy oily film left behind..its kind of a PITA to remove. I used some opti-clean to clean it off but still took some effort..sometimes 845 works great and removes easy..and sometimes I get this happen.

[Ryan R]

The first coat was on for an hour until removed. It was a light coat and no problems removing.
I applied the second coat too thick and allowed an hour until wipe off.
Did 2 things...
One side I reapplied and wiped immediately.
Second side I used my ONR QD mix.
Both worked well but I'll make a better evaluation tonight when I see the car at work

[umi000]

Check if there's any sweating - I once applied 845 too thickly, under a cloudy but noon-time sky, and I had it sweating on me for the next week.

[Ryan R]

Check if there's any sweating - I once applied 845 too thickly, under a cloudy but noon-time sky, and I had it sweating on me for the next week.

I've read about this before...thanks for the reminder...luckily I see it every day so I keep an eye on it