PDA

View Full Version : Autogeek Eye Candy



Pages : [1] 2

Mike Phillips
11-29-2011, 03:09 PM
Autogeek Eye Candy (http://www.autogeekonline.net/forum/pictures-autogeek-s-car-week/43644-autogeek-eye-candy.html)



Autogeek's Car of the Week!
http://www.autogeekonline.net/gallery/data/715/AG-car-of-the-week.jpg



The below posts are just excerpts from the complete write-ups for each of the cars that we've put through our Autogeek's Car of the Week" program. Most of the actual write-ups have around 100 pictures or more...

If you want to check out the complete write-ups for any of the cars in this thread you can click the links below.




**Full Articles***

1969 Camaro Pace Car - Show Car Makeover - Modeled by Michelle (http://www.autogeekonline.net/forum/pictures-autogeek-s-car-week/43165-1969-camaro-pace-car-show-car-makeover-modeled-michelle.html)
Blown 1934 Ford Pick-up - Show Car Makeover - Modeled by Kristin (http://www.autogeekonline.net/forum/pictures-autogeek-s-car-week/43007-blown-1934-ford-pick-up-show-car-makeover-modeled-kristin.html)
1957 Chevy Bel Air - Extreme Makeover - Modeled by Kristin (http://www.autogeekonline.net/forum/pictures-autogeek-s-car-week/42954-1957-chevrolet-bel-air-remove-swirls-modeled-kristin.html)
Hand applying Dodo Juice Orange Crush Soft Wax with PJ from Dodo Juice! (http://www.autogeekonline.net/forum/tips-techniques-how-articles-interacting-discussion-forums/42991-hand-applying-dodo-juice-orange-crush-soft-wax-pj-dodo-juice.html)
1972 Corvette Stingray - Extreme Makeover - Process and Products Used (http://www.autogeekonline.net/forum/pictures-autogeek-s-car-week/42500-1972-corvette-stingray-extreme-makeover-process-products-used.html)
1954 Ford F-100 - Modeled by Janna (http://www.autogeekonline.net/forum/pictures-autogeek-s-car-week/42302-1954-ford-f-100-modeled-janna.html)
1954 Ford F-100 - Extreme Makeover - Process and products used (http://www.autogeekonline.net/forum/pictures-autogeek-s-car-week/42270-1954-ford-f-100-extreme-makeover-process-products-used.html)
1970 1/2 Camaro - Show Car Finish by Pinnacle - Modeled by Amy (http://www.autogeekonline.net/forum/pictures-autogeek-s-car-week/42076-1970-1-2-camaro-show-car-finish-pinnacle-modeled-amy.html)
1977 Can Am Corvette - Extreme Makeover (http://www.autogeekonline.net/forum/pictures-open-garage-classes/41292-picture-comments-1977-can-am-corvette-extreme-makeover.html)
Sam's 1994 Turbo 3.6 Porsche (http://www.autogeekonline.net/forum/sign-up-open-garage-classes/40652-1994-porsche-964-turbo-3-6-modeled-jana-amy-3.html)
Rene's 2011 Camaro with a Mirror Finish! (http://www.autogeekonline.net/forum/sign-up-open-garage-classes/40438-autogeek-s-car-week-2011-camaro-modeled-amy.html)
1986 Buick Regal T-Type Turbo (http://www.autogeekonline.net/forum/pictures-autogeek-s-car-week/40373-1986-buick-regal-t-type-turbo.html)








Autogeek Eye Candy - Autogeek's Car of the Week Projects - 2011
About a year ago I had this idea for Autogeek's Car of the Week but just couldn't start it up at the time. This last summer was busier than any other previous summer but I decided that come what may... I needed to get it going...

We have just too cool of facilities and there are just too many cool cars that need a little help to not bring the two components together to use in a way to share products, process and results...

While our first car under the Autogeek's Car of the Week banner was done in August of 2011, there's actually been a lot of cars I've brought to Autogeek since joining the AG Team that fit into this category so I'm going to include them also...

To start with however, here's a pictorial history of the cars we've worked on since starting "Autogeek's Car of the Week".



First up was my friend Bob's 1986 Buick Regal T-Type...

1986 Buick Regal T-Type Turbo (http://www.autogeekonline.net/forum/pictures-autogeek-s-car-week/40373-1986-buick-regal-t-type-turbo.html)

Bob, the owner of this car purchased this car brand new and has kept meticulous care of it ever since. It's all original and in mint condition. It's also for sale, anyone interested I can put you in touch with Bob who's a very good friend of mine and Autogeek.






For this project we showcased the new 4" Flex 3401 backing plates - these will be available in January at Autogeek.net.
http://www.autogeekonline.net/gallery/data/1252/1986BuickRegal_011.jpg


The new 6" and 4" backing plates for the Flex 3401
http://www.autogeekonline.net/gallery/data/804/NewFlexBackingPlates01.jpg




And Bob, the owner, learned how to polish and wax his own car by machine!

Bob using a PC 7424XP to remove swirls...
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/305793_253031471397565_160604287306951_859439_1233 208_n.jpg

Bob getting ready to machine apply wax to the paint...
http://www.autogeekonline.net/gallery/data/1252/1986BuickRegal_013.jpg


After
http://www.autogeekonline.net/gallery/data/1252/1986BuickRegal_009.jpg

http://www.autogeekonline.net/gallery/data/1252/1986BuickRegal_010.jpg





Next we worked on Rene's 2011 Red Jewel Tint Camaro.

2011 Camaro - Modeled by Amy (http://www.autogeekonline.net/forum/pictures-autogeek-s-car-week/40438-2011-camaro-modeled-amy.html)

I met Rene over the phone as he was looking for help to remove the etchings left by some Bird Droppings. The next day I was scheduled to shoot a series of how-to videos with my friend Matt Steel one of the co-hosts of Truck U and of TrucksGoneWild.com fame and we needed a "cool" car.

I floated the idea to Rene about letting us use his car in the videos and then afterwards I promised to help him learn how to machine polish paint and bring his car back for a Show Car Makeover. To my surprise... he took me up on his offer. We shot the video, he brought his car back and I've been good friends with Rene and his wife Sheila ever since.

You can check out Rene's car with Matt and myself here,

Pinnacle Wax Complete Automotive Detailing How-to (http://www.youtube.com/autogeek#p/u/0/1xpgWnWbWfY)


Here's Rene using Blackfire Clay (http://www.autogeek.net/blackfire-poly-clay.html) and Blackfire Clay Lubricant (http://www.autogeek.net/blackfire-clay-lubricant.html) to clay the paint...
http://www.autogeekonline.net/gallery/data/1254/2011RJTCamaro006a.jpg


Robert does a Test Spot (http://www.autogeekonline.net/forum/hot-topics-frequently-asked-questions/24043-test-spot-story-behind-term.html) on the hood to dial-in the process the rest of us will duplicate over the rest of the car. For this he's using the Flex 3401 (http://www.autogeek.net/flex-orbital-polisher.html) with a Cyan Hydro-Tech Cutting Pad (http://www.autogeek.net/cyan-hydro-tech-pad.html) and the Blackfire Scratch Resistant Compound. This combination of products on the 5.0 Speed Setting removed all but the deepest RIDS (http://www.autogeekonline.net/forum/hot-topics-frequently-asked-questions/24045-rids-definition-rids-story-behind-term.html)
http://www.autogeekonline.net/gallery/data/1254/2011RJTCamaro008.jpg

Here you can see the tint in the tinted clear coming off the car as we compound it and onto the face of the pad. This is nothing to worry about, keep in mind when you're doing any correction work on a clearcoat paint system you too are removing paint that is building up on the face of your buffing pad but because the paint is clear you won't see it build-up on the face of your pad.


See this article,
Why it's important to clean your pads often... (http://www.autogeekonline.net/forum/tricks-tips-techniques/28755-why-s-important-clean-your-pads-often.html)

http://www.autogeekonline.net/gallery/data/1254/2011RJTCamaro010.jpg


That's me compounding the lower rear quarter panel, if it has paint it gets polished...
http://www.autogeekonline.net/gallery/data/1254/2011RJTCamaro011.jpg


Todd Helme gets ready to start on the passenger side...
http://www.autogeekonline.net/gallery/data/1254/2011RJTCamaro014.jpg


Teamwork...
http://www.autogeekonline.net/gallery/data/1254/2011RJTCamaro015.jpg


At this point we're machine polishing the paint using the Flex 3401 with Crimson Hydro-Tech Finishing Pads (http://www.autogeek.net/lc-crimson-pad.html) and Blackfire Scratch Resistant Clear Finishing Polish (http://www.autogeek.net/blackfire-src-finishing-polish.html).
http://www.autogeekonline.net/gallery/data/1254/2011RJTCamaro017.jpg




Beauty Shots


And here's his beautiful car after we machine polished and machine waxed the paint using the Blackfire line of products.

http://www.autogeekonline.net/gallery/data/1254/2011RJTCamaro002.jpg



Beauty and the Beast...
This was also the second time in my entire detailing career that I incorporated a lovely model to showcase the finished results...


These new microfiber towels are thick and plush and perfect for wiping off any wax or paint sealant... Here Amy's using the technique I wrote about in this article,

How to correctly fold and use a Microfiber Towel (http://www.autogeekonline.net/forum/how-articles/29230-how-correctly-fold-use-microfiber-towel.html)

http://www.showcargarage.com/gallery/files/1/2011RJTCamaro020.jpg

http://www.showcargarage.com/gallery/files/1/2011RJTCamaro023.jpg

http://www.showcargarage.com/gallery/files/1/2011RJTCamaro026.jpg


More to come...

:xyxthumbs:

Mike Phillips
11-29-2011, 03:11 PM
Continued...



Next was my good friend Sam's very rare Porsche 964 Turbo 3.6

1994 Porsche 964 Turbo 3.6 - Modeled by Janna and Amy (http://www.autogeekonline.net/forum/sign-up-open-garage-classes/40652-1994-porsche-964-turbo-3-6-modeled-janna-amy.html)

This was the first car I ever used a model with when I buffed it out about a year earlier, you can check out the pictures from that project here.

1994 Porsche Detailed for "Operation Comfort" Modeled by Brittany from Stuart, Florida (http://www.autogeekonline.net/forum/show-n-shine/26233-1994-porsche-detailed-operation-comfort-modeled-brittany.html)

Need a mirror?
http://www.autogeekonline.net/gallery/data/871/MissB012.jpg


Sam's a true car enthusiast but not so good at maintaining a black finish. Since buffing it out the first time a new category of products has been introduced called Paint Coatings. You can read more about them here,

3-Categories: Waxes, Paint Sealants and Coatings (http://www.autogeekonline.net/forum/hot-topics-frequently-asked-questions/34185-3-categories-waxes-paint-sealants-coatings.html)


I told Sam about this new paint coating called CQuartz (http://www.autogeek.net/cquartz-kit.html) and offered to machine polish and then apply CQuartz to the paint and he was all for it...


Showcase CarPro's Iron X
Before machine polishing to remove scratches I washed the car thoroughly and also used a brand new product on the market called Iron X, which also just won 3 Awards.

Iron X Won the 2011 Detailing World Awards - Triple Win! (http://www.autogeekonline.net/forum/auto-detailing-101/43640-iron-x-won-2011-detailing-world-awards-triple-win.html)


Sprayed on Iron X and let dwell, as you can see the wheels were actually pretty free of any iron contamination... that's a good thing although I know everyone wants to see a lot of color running off the rim... (that would mean the wheel was in fact embedded with iron filings.
http://www.autogeekonline.net/gallery/data/1257/94PorscheCTW13.jpg

After agitating I rinsed...
http://www.autogeekonline.net/gallery/data/1257/94PorscheCTW14.jpg


Perfectly clean and contamination free... I repeated the same procedure to the other three wheels and tires...
http://www.autogeekonline.net/gallery/data/1257/94PorscheCTW15.jpg



Next up... decontaminate the body panels using Iron X
http://www.autogeekonline.net/gallery/data/1257/94PorscheCTW19.jpg


http://www.autogeekonline.net/gallery/data/1257/94PorscheCTW20.jpg



Here's Sam the owner using a DA Polisher for the first time...
http://www.autogeekonline.net/gallery/data/1257/94PorscheCTW37.jpg


We also taught more people how to machine polish paint for this project... pretty cool, learning how to machine polish for the first time on a RARE BLACK Porsche! Where else in the world do people get these kinds of opportunities besides Autogeek.net ? :laughing:

In the below picture, the student, (Rene), has now become the teacher!

Here's Rene giving Seth some hand-on training... this was Seth's first time machine polishing...
http://www.autogeekonline.net/gallery/data/1257/94PorscheCTW38.jpg


Here's Chevron also using a DA Polisher for the first time...
http://www.autogeekonline.net/gallery/data/1257/94PorscheCTW39.jpg



And everyone had the opportunity to apply the new CQuartz Paint Coating...

http://www.autogeekonline.net/gallery/data/1257/94PorscheCTW40.jpg

http://www.autogeekonline.net/gallery/data/1257/94PorscheCTW41.jpg

http://www.autogeekonline.net/gallery/data/1257/94PorscheCTW42.jpg

http://www.autogeekonline.net/gallery/data/1257/94PorscheCTW43.jpg



And oh man... did it come out looking sweeeet.....

http://www.autogeekonline.net/gallery/data/1257/94PorscheCTW44.jpg

http://www.autogeekonline.net/gallery/data/1257/94PorscheCTW45.jpg


http://www.autogeekonline.net/gallery/data/1257/94PorscheCTW46.jpg


http://www.autogeekonline.net/gallery/data/1257/94PorscheCTW47.jpg

http://www.autogeekonline.net/gallery/data/1257/94PorscheCTW48.jpg


Here's the Transformation Team, from left to right...

Chavron, Sam, Pete, Tom, Mark,
Seth, Rene
http://www.autogeekonline.net/gallery/data/1257/94PorscheCTW49.jpg


And then I introduced the term Swirl Girl as Autogeek carries a very cool tool that I use and show others all the time called the Brinkmann Swirl Finder Light also called The Cruel Master. This handy handheld light works like the Sun to reveal swirls without having to back your car outside into the sun. Assuming it's a sunny day...


Janna and Amy the first two Swirl Girls...
http://www.autogeekonline.net/gallery/data/1257/94PorscheCTW58.jpg


The Brinkmann Swirl Finder Light (http://www.autogeek.net/brinkmann-swirl-finder-light.html)at Autogeek.net

http://www.autogeekonline.net/gallery/data/1257/94PorscheCTW59.jpg


Be sure to read my article on the Brinkmann Swirl Finder Light which also includes the history of where it came from...

Mike Phillips Review - Brinkmann Swirl Finder Light (http://www.autogeek.net/brinkmann-swirl-finder-light-review.html)




More to come...


:xyxthumbs:

Mike Phillips
11-29-2011, 03:12 PM
Continued...


Next up is my friend Dave's very cool 1977 Can Am Corvette...


1977 Can Am Corvette - Modeled by Amy and Janna - Pictures and Video! (http://www.autogeekonline.net/forum/pictures-autogeek-s-car-week/41292-1977-can-am-corvette-modeled-amy-janna-pictures-video.html)

On Labor Day Weekend I went to the First Annual Gold Coast Corvette Club and just by walking around and taking pictures for this thread,

Gold Coast Corvette Club - First Annual Car Show (http://www.autogeekonline.net/forum/off-topic/40573-gold-coast-corvette-club-first-annual-car-show.html)


I met a number of people that had very cool cars on display... I approached these people and told them about "Autogeek's Car of the Week" and to date, all but one guy has taken me up on the offer to bring their SIV or Special Interest Vehicle to our TV Studio and full-functioning detail shop for a "Show Car Makeover".

The first such person was Dave and his 1977 Can Am Corvette...

These are shots I took at the car show to capture just how badly the paint was swirled out. There were so many swirls in the paint you could hardly tell it was a multi-color metalflake custom paint job. (we fix this, see below)


Here's what the paint looked like while the car was on display at the car show. This first shot I frame-up so you'll know where the follow-up shot is focused...

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub020.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub021.jpg


And the entire car looked like you see in these pictures... It's a very cool car, it just needed some machine polishing to remove the swirls and restore a true show car finish.

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub022.jpg

I'm not even close to being a Pro Photographer, just a point-and-shoot guy but I've been taking pictures of car projects and sharing them on discussion forums since discussion forums were invented. Along the way I've written a few articles on the topic of photography and getting the pictures off the memory stick on the Internet in a linear fashion like you see in this thread.


Photography and Working with Pictures on the Internet

If you're going to be a "Forum Person" on ANY forum, help yourself by learning how to work with picture on the Internet (http://www.autogeekonline.net/forum/off-topic/40083-if-you-re-going-forum-person-any-forum-help-yourself-learning-how-work-picture-internet.html)

How to resize your photos before uploading to a photo gallery (http://www.autogeekonline.net/forum/tips-techniques-how-articles-interacting-discussion-forums/35250-how-resize-your-photos-before-uploading-photo-gallery.html) - Using Easy Thumbnails

Handiest little picture viewer tool I've been using for years now... (http://www.autogeekonline.net/forum/tips-techniques-how-articles-interacting-discussion-forums/26202-handiest-little-picture-viewer-tool-i-ve-been-using-years-now.html)

How to upload a photo into your Autogeek Photo Gallery (http://www.autogeekonline.net/forum/how-do-different-types-things-ag-discussion-forum/21295-how-upload-photo-into-your-autogeek-photo-gallery.html)

How to insert an image from your photo gallery into your message (http://www.autogeekonline.net/forum/how-articles-discussion-forums/21313-how-insert-image-your-photo-gallery-into-your-message.html)

How-To capture swirls, scratches, etchings and other surface defects with your camera (http://www.autogeekonline.net/forum/tips-techniques-how-articles-interacting-discussion-forums/26917-how-capture-swirls-scratches-etchings-other-surface-defects-your-camera.html)

How-to work with pictures on discussion forums (http://www.autogeekonline.net/forum/how-articles-discussion-forums/21320-how-work-pictures-discussion-forums.html)

How to crop out the fluff and resize your pictures! - Using FREE online software! (http://www.autogeekonline.net/forum/tips-techniques-how-articles-interacting-discussion-forums/23918-how-crop-out-fluff-resize-your-pictures-using-free-online-software.html)

Photobucket and Missing Pictures (http://www.autogeekonline.net/forum/off-topic/23699-photobucket-missing-pictures.html)




Showcasing more cool new products...
For this project we showcased the brand new formulas for Optimum Hyper-Compound and Hyper-Polish and some prototype "small" buffing pads for rotary buffers. These work great for buffing thin panels or getting into tight areas or for what I call Precision Surgical Buffing.


We'll be using the brand new formulas for Optimum Hyper-Compound and Optimum Hyper-Polish
http://www.autogeekonline.net/gallery/data/1261/CanAmCorvette002.jpg

http://www.autogeekonline.net/gallery/data/1261/CanAmCorvette003.jpg


I could buff all of these cars out by myself but I prefer to let others join in the fun...

Here's Adam aka Harleyguy working with Robert aka Impressions as Chavron watches and learns a few tips and techniques. In the background Chavron's wife gets caught up on her own projects...
http://www.autogeekonline.net/gallery/data/1261/CanAmCorvette032.jpg

Check out this shot of Adam using a 3" Cyan Foam Cutting pad on a Rotary Buffer to do what's called edging...
http://www.autogeekonline.net/gallery/data/1261/CanAmCorvette047.jpg


Here's the owner Dave using a machine for the first time to polish the paint on his Can Am Corvette...

Dave using the Griot's Garage DA Polishers
http://www.autogeekonline.net/gallery/data/1261/CanAmCorvette025.jpg



Here's Rick, Dave's friend using the Griot's Garage DA Polisher for the first time...
http://www.autogeekonline.net/gallery/data/1261/CanAmCorvette024.jpg



For this project we applied another new Paint Coating on the market called Opti-Coat II and everyone had a chance to check out this new technology for protecting a car's finish.

Note the product comes in a syringe...

After wiping the paint down to remove any polishing residues Adam starts in applying the Opti-Coat II

http://www.autogeekonline.net/gallery/data/1261/CanAmCorvette058.jpg


http://www.autogeekonline.net/gallery/data/1261/CanAmCorvette057.jpg


Next up Chavron will give it a try...

http://www.autogeekonline.net/gallery/data/1261/CanAmCorvette060.jpg


Here's the owner Dave checking out the application of Opti-Coat II on the T-tops...
http://www.autogeekonline.net/gallery/data/1261/CanAmCorvette063.jpg



And now some beauty shots...

http://www.autogeekonline.net/gallery/data/1261/CanAmCorvette072.jpg


http://www.autogeekonline.net/gallery/data/1261/CanAmCorvette067.jpg



BEFORE
(In case you forgot)
http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub021.jpg



AFTER
http://www.autogeekonline.net/gallery/data/1261/CanAmCorvette014.jpg


Hey look... it has a multi-color metalflake paint job!
http://www.autogeekonline.net/gallery/data/1261/CanAmCorvette010.jpg



And then Janna and Amy cam back to inspect out work...

http://www.autogeekonline.net/gallery/data/1261/CanAmCorvette019.jpg


http://www.autogeekonline.net/gallery/data/1261/CanAmCorvette088.jpg


More to come...


:xyxthumbs:

Mike Phillips
11-29-2011, 05:10 PM
Continued...


Next up is my friend Tommy's incredibly cool and rare 1970 1/2 Split Front Bumper Camaro...



Tommy is another Car Guy I met at the Gold Coast Corvette Club - First Annual Car Show (http://www.autogeekonline.net/forum/off-topic/40573-gold-coast-corvette-club-first-annual-car-show.html) as I walked around taking pictures of all the cars.

Here's a shot of it from the above thread,

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub070.jpg



While I was there I didn't inspect the paint because there were too many clouds blocking the sun light. I also figured no matter what the condition of the paint, at a minimum you can always freshen up a car with a new coat of wax. So I talked to Tommy about bringing his car to Autogeek and gave him my card and left it up to him to contact me.

Surprise surprise... he called me! (most people I've talked to at shows don't?) So we scheduled a Thursday for him to bring us his car. Tommy told me he had never used a machine to polish paint before but was excited to learn. He also asked if he could bring his daughter Nicole because she's a "Car Girl".


When the car arrived I took the below shot... most people just would die to have a custom paint job this nice....

http://www.autogeekonline.net/gallery/data/1279/1970Camaro001.jpg


But the Brinkmann Swirl Finder Light reveals the true condition of the paint and that is a surface filled with,

Swirls
Scratches
Pig Tails
RIDS
Tracers
Micro-marring also called DA HazeYou can find a definition for all of the above in either my e-book or in this article here,

Tracers Tracers - RIDS - Pigtails - Cobweb Swirls - Rotary Buffer Swirls - Holograms - Water Spots - Bird Drooping Etchings - Micro-Marring (http://www.autogeekonline.net/forum/hot-topics-frequently-asked-questions/22234-tracers-rids-pigtails-cobweb-swirls-rotary-buffer-swirls-holograms-water-spots-bird-droping-etchings-micro-marring.html)



Check it out...

Pig Tails
If you look closely you can see a scratch that looks like the letter e in cursive writing running horizontally across the paint, this is called a Pig Tail and it generally comes from an abrasive particle that gets trapped between the paint and a sanding disc when machine sanding. The entire finish had Pig Tails plus Tracers randomly dispersed...

http://www.autogeekonline.net/gallery/data/1279/1970Camaro028.jpg



Micro-marring also called Tick Marks or DA Haze
The millions of tiny, small scratches highlighted by the Brinkmann Swirl Finder Light are caused by improperly worked abrasives when using a DA Polisher like the Porter Cable 7424XP, Meguiar's G110v2, Griot's Garage 6" ROP or Shurhold DA Polisher. These types of scratches are through out the entire car but you can really only see them on the black stripes not the metallic green paint. The point is that even though your eyes can't see them on the lighter colors they still cloud and dull the finish and keep you from seeing the beautiful color and/or metallic finish under the clear. These have to go!
http://www.autogeekonline.net/gallery/data/1279/1970Camaro029.jpg




RIDS - Random, Isolated Deeper Scratches
These types of scratches come from normal wear and tear and don't have any pattern to them thus the use of the word random in the description.

http://www.autogeekonline.net/gallery/data/1279/1970Camaro030.jpg


More information on RIDS here...
RIDS - The Definition of RIDS and the story behind the term... (http://www.autogeekonline.net/forum/hot-topics-frequently-asked-questions/24045-rids-definition-rids-story-behind-term.html)


Swirls and Scratches
What I see here is a combination of RIDS, swirls, DA Haze and Arc Scratches probably caused by wiping but they are also caused by improper use of a rotary buffer.

http://www.autogeekonline.net/gallery/data/1279/1970Camaro031.jpg


My eyes hurt after looking at the above pictures!


For my how-to book (http://www.autogeek.net/art-of-detailing-paperback-book.html) I needed to create a list of categories that would describe the condition of a car's paint AFTER you first wash and dry the car.

That list can be found starting on page 30 of the e-book. After evaluating the condition of the paint on this Camaro I would place it into the category 3 Good Condition as it has way too many below surface defects to fall into category 1 Show Car Quality or category 2 Excellent Condition

We did a Test Spot and dialed-in a process to undo the damage and restore a show car finish...

Being new to machine polishing Thomas and his daughter Nicole learned very quickly and were both buffing like pros after just a panel or two...
http://www.autogeekonline.net/gallery/data/1279/1970Camaro044.jpg


http://www.autogeekonline.net/gallery/data/1279/1970Camaro045.jpg


Here's Nicole priming her pad...

How to prime a foam pad when using a DA Polisher (http://www.autogeekonline.net/forum/how-articles/35292-how-prime-foam-pad-when-using-da-polisher.html)

http://www.autogeekonline.net/gallery/data/1279/1970Camaro046.jpg



A little hands-on training to get a feel for how hard to push down, how fast or s-l-o-w-l-y to move the DA Polisher and the pattern to use for consistent, repeatable results...

http://www.autogeekonline.net/gallery/data/1279/1970Camaro047.jpg


Having fun at Autogeek's Garage!
http://www.autogeekonline.net/gallery/data/1279/1970Camaro048.jpg


Polishing like a Pro!
http://www.autogeekonline.net/gallery/data/1279/1970Camaro006.jpg


http://www.autogeekonline.net/gallery/data/1279/1970Camaro007.jpg


And of course we had a little help from our friends...

Adam using a Rotary Buffer with 3" pads
Focusing on the task at hand especially when using a rotary buffer for isolated defects as you have to be careful you don't get the paint too hot...
http://www.autogeekonline.net/gallery/data/1279/1970Camaro041.jpg

Adam using a Porter Cable to ensure zero swirls...
http://www.autogeekonline.net/gallery/data/1279/1970Camaro017.jpg



Rotary Buffer for removing serious paint defects
Todd breaks out a wool pad with a Makita Rotary Buffer to remove some of the Pig Tails on the roof. Just to note, this car is actually a great candidate for dampsanding to level the paint and in the process remove all the deeper Pig Tails, Tracers and Orange Peel in the paint but that's another project and another day...

http://www.autogeekonline.net/gallery/data/1279/1970Camaro039.jpg


Later after all the machine polishing and machine applying the wax Tommy and Nicole put on the Microfiber Gloves (http://www.autogeek.net/micglovinbul.html) and begin wiping the wax off...

http://www.autogeekonline.net/gallery/data/1279/1970Camaro053.jpg



The Camaro looked "good" when it arrived... now it looks PHENOMENAL!

Classic Camaro with a glassy wet-looking finish created entirely by machine and finished off using Pinnacle Souveran Paste Wax (http://www.pinnaclewax.com/souveran.html)...

http://www.autogeekonline.net/gallery/data/1279/1970Camaro069.jpg

http://www.autogeekonline.net/gallery/data/1279/1970Camaro061.jpg

http://www.autogeekonline.net/gallery/data/1279/1970Camaro064.jpg

http://www.autogeekonline.net/gallery/data/1279/1970Camaro065.jpg


Amy stopped by to inspect our work...

http://www.autogeekonline.net/gallery/data/1279/1970Camaro073.jpg

http://www.autogeekonline.net/gallery/data/1279/1970Camaro082.jpg



More to come...

:)

Mike Phillips
11-29-2011, 05:13 PM
Continued...

Next up is my friend Glen's Custom 1954 Ford F-100 Fat Fendered Truck with a Tilt-Frontend...

1954 Ford F-100 - Extreme Makeover - Process and products used (http://www.autogeekonline.net/forum/pictures-autogeek-s-car-week/42270-1954-ford-f-100-extreme-makeover-process-products-used.html)


When Glen arrived I had him drive his truck into the studio so we could give it a quick wipe-down. While the paint looks great in the below picture,

http://www.autogeekonline.net/gallery/data/1290/54Ford11.jpg


I moved the truck outside and used bright, overhead sunlight to show the true condition of the finish.

True Condition
http://www.autogeekonline.net/gallery/data/1290/54Ford151.jpg

http://www.autogeekonline.net/gallery/data/1290/54Ford16.jpg



The roof is the same way as are the vertical panels...

http://www.autogeekonline.net/gallery/data/1290/54Ford29.jpg


Now I've moved the Ford F-100 back into the studio with the mats down to protect the floor from polish and wax splatter while we perform the extreme makeover.

http://www.autogeekonline.net/gallery/data/1290/54Ford41.jpg

It's a little trickier to capture light or shallow swirls and scratches on light colored paints but here's what I could get in the studio...

Big Picture
The big picture is that while this truck looks incredible, that is shiny and beautiful, a Pro Detailer doesn't see it as it is... they see what it can be...

While in the picture it can look like the scratches are isolated to a section of the picture that's actually not the case, the scratches you see are throughout 100% of the surface it's just hard to capture on camera...

http://www.autogeekonline.net/gallery/data/1290/54Ford12.jpg



Restoring smoothness by claying the paint
Here's Glen the owner of the truck claying just in front of the windshield for the very first time..
http://www.autogeekonline.net/gallery/data/1290/54Ford621.jpg


This truck was re-painted approximately one year ago but just from exposure to the outdoors has made the paint vulnerable to air-borne contaminants...

This shot was taken with my trusty, dusty Canon Rebel with the flash on after claying the roof...
Without the flash on here's what the clay looks like and this is what it looked like in person... The roof and the other horizontal panels pretty much felt like sandpaper before we started.

Ewww....
http://www.autogeekonline.net/gallery/data/1290/54Ford68.jpg



Onto Machine Polishing but first one comment on the rotary buffer swirls...
This truck was painted by a custom painter and we don't blame him for the swirls. The fact is, it's not how GREAT the painter is... it's the guy that does the wetsanding, cutting and buffing that makes or breaks the end-results.

It looks like the guy that did the sanding and buffing used a rotary buffer and likely a wool finishing pad for his last machine step.

This is the norm for the kind of work done at the majority of body shops across the world. Most people getting their car painted have no idea as to what to ask for and just take what they get when they pick up their freshly painted car.

Most body shops only use a rotary buffer for all their buffing work and don't charge enough money to cover the cost for extra steps whether they be doing a final rotary buffing step using a foam finishing pad and an ultra fine cut polish or using a DA Polisher to ensure the swirls are all removed. The the swirls I documented in this custom paint job or the norm for this industry. That's okay as it give Pro detailers plenty of work undoing the damage.


For our Test Spot we're hoping to use Optimum's brand new Microfiber Finishing Pads with the Optimum Hyper-Polish on DA Polisher. This is keeping with the philosophy of,

Use the least aggressive product to get the job done which is also covered in my e-book on page 84 of both the e-book and the paperback version of The Art of Detailing and how to do a Test Spot starts on page 94


Doing a Test Spot
Here's Robert spraying Hyper-Polish onto a brand new, clean Optimum Microfiber Pad on a Porter Cable 7424XP

http://www.autogeekonline.net/gallery/data/1290/54Ford71.jpg


Note that Robert is using some painter's tape to make a tape-line on a horizontal panel and then only buffing on one side of the tape line. By doing this he will make it real easy to inspect the results on other side he's buffing on and compare it to the "control" side to gage the effectiveness of this combination of pad, product, tool and of course his expert technique.
http://www.autogeekonline.net/gallery/data/1290/54Ford72.jpg


After performing the Test Spot we inspect the results and the combination of Optimum Hyper-Polish with the new Optimum Microfiber Finishing Pads on the Porter Cable on the 6.0 speed setting removed 99.9% off all the swirls and scratches and left the paint simply AMAZING looking with no micro-marring even after chemically stripping the paint with IPA.

Since our Test Spot confirmed our process everyone joined in using the same combination of pads and product with various DA Polishers including the Porter Cable 7424XP, Meguiar's G110v2 and the Griot's Garage DA Polisher.

These are are the same "type" of tool in that they all use a Free Floating Spindle Assembly for a drive mechanism but they each have different power configurations. Not that it's a HUGE deal but here are the speed settings we used for the different tools with the microfiber pads....

Porter Cable 7424XP = 6.0

Meguiar's G110v2 = 5.0

Griot's Garage = 5.0
Robert from Impression's Detailing
Here's Robert with the PC tackling the rest of the hood... Robert is booked all the time doing show car work and his shop in in Palm City, Florida called Impression's Detailing. I often get asked by locals for a true professional to both detail their car and to also maintain it and I know I can always trust Robert to completely take care of all his customer's needs.
http://www.autogeekonline.net/gallery/data/1290/54Ford73.jpg


Jeff
Here's Jeff using the Porter Cable 7424XP to tackle the rear passenger fender, Jeff works in our Tech Support division and is a true car guy owning 2 Mustangs and a classic 1978 El Camino (http://www.autogeekonline.net/gallery/data/1290/JeffsElky1.jpg)
http://www.autogeekonline.net/gallery/data/1290/54Ford74.jpg


Glen
Here's Glen using a Meguiar's G110v2 to remove the swirls out of the tailgate. This is the first time Glen has ever used a machine to polish paint and he did a superb job!
http://www.autogeekonline.net/gallery/data/1290/54Ford75.jpg


Me using the Griot's Garage 6" Random Orbital Polisher
http://www.autogeekonline.net/gallery/data/1290/54Ford76.jpg


Rene tackling the running boards, door and rear fender...
http://www.autogeekonline.net/gallery/data/1290/54Ford81.jpg


Griot's 3" Mini Polisher
This is me tackling the iconic front grill using the Griot's Garage 3" Mini Polisher using an Optimum 3.25" Microfiber Pad with Hyper-Polish.

I now the question everyone wants to ask and here is the answer...

YES the 3" Mini Polisher was able to maintain pad rotation. I started with the upper potions and worked downward and wiped the residue off as I worked... look how shiny and glossy the paint is after using the 3" Mini Polisher. The 3" Mini Polisher also makes a great Dampsander (http://www.autogeekonline.net/forum/wet-sanding-cutting-buffing/38475-dampsanding-3-griot-s-garage-mini-polisher.html) for spot repair.


http://www.autogeekonline.net/gallery/data/1290/54Ford87.jpg



After Machine Polishing...

Next up we machine wax the paint using Pinnacle Signature Series II

For this we're going to use Lake Country Red Low Profile Ultrasoft Wax or Sealant Pads (http://www.autogeek.net/ccs-5-5inch-foam-buffing-pads.html)on our DA Polishers on the 3-4 Speed Setting

With the Pinnacle Signature Series II Paste Wax you can gently knock the wax out of the jar and then wearing a Microfiber Glove make a few swipes across the face of the pad and you're ready to start machine waxing using a paste wax.
http://www.autogeekonline.net/gallery/data/1290/54Ford96.jpg


http://www.autogeekonline.net/gallery/data/1290/54Ford97.jpg


Machine waxing with a DA Polisher is a lot more effective than applying wax by hand and in my opinion safer to the paint and faster...
http://www.autogeekonline.net/gallery/data/1290/54Ford98.jpg



With Pinnacle Signature Series II Paste Wax you don't have to let the wax dry before removing it, so as Robert and Glen apply the wax, Adam and Rene follow them and carefully wipe the wax off.
http://www.autogeekonline.net/gallery/data/1290/54Ford100.jpg



Beauty Shots...
http://www.autogeekonline.net/gallery/data/1290/54Ford148m.jpg

http://www.autogeekonline.net/gallery/data/1290/54Ford111.jpg


http://www.autogeekonline.net/gallery/data/1290/54Ford108.jpg


http://www.autogeekonline.net/gallery/data/1290/54Ford105.jpg


For this project, Janna came by to inspect our work...

http://www.autogeekonline.net/gallery/data/1290/54Ford117.jpg

http://www.autogeekonline.net/gallery/data/1290/54Ford120.jpg

http://www.autogeekonline.net/gallery/data/1290/54Ford145.jpg


http://www.autogeekonline.net/gallery/data/1290/54Ford59.jpg

http://www.autogeekonline.net/gallery/data/1290/54Ford58.jpg


More to come...


:xyxthumbs:

Mike Phillips
11-29-2011, 05:50 PM
Continued...


Next up is this really cool bright yellow 1972 Corvette...


1972 Corvette Stingray - Extreme Makeover - Process and Products Used (http://www.autogeekonline.net/forum/pictures-autogeek-s-car-week/42500-1972-corvette-stingray-extreme-makeover-process-products-used.html)

Like most Special Interest Vehicles, from a distance they always look great! But to the trained eye and someone that knows how to really inspect the finish quality, this Corvette was hurting...

Pigtails, Swirls and Scratches throughout the finish...
These are called Pigtails and they usually come from machine sanding if any type of abrasive particle gets trapped between the sanding disc and the paint...

http://www.autogeekonline.net/gallery/data/1294/1972Corvette058.jpg


Stains on paint
There was some kind of surface staining on the paint mostly on the vertical panels...
http://www.autogeekonline.net/gallery/data/1294/1972Corvette067.jpg



We taped-off and covered anything we didn't want to detail after the fact with a toothbrush...

http://www.autogeekonline.net/gallery/data/1294/1972Corvette061.jpg

http://www.autogeekonline.net/gallery/data/1294/1972Corvette062.jpg

http://www.autogeekonline.net/gallery/data/1294/1972Corvette063.jpg


The paint felt rough so we clayed it...
http://www.autogeekonline.net/gallery/data/1294/1972Corvette064.jpg

http://www.autogeekonline.net/gallery/data/1294/1972Corvette065.jpg




Machine Polishing and Waxing...

Here's Adam getting ready to tackle the hood...

http://www.autogeekonline.net/gallery/data/1294/1972Corvette068.jpg

http://www.autogeekonline.net/gallery/data/1294/1972Corvette069.jpg

http://www.autogeekonline.net/gallery/data/1294/1972Corvette071.jpg


Here's Kyle doing a Test Spot and then tackling the rear clip of the Corvette...
http://www.autogeekonline.net/gallery/data/1294/1972Corvette072.jpg


We used Purple Foamed Wool pads with the Flex 3401 to do the heavy correction step... they're fairly indestructible.

Unlike a foam pad and similar to a wool cutting pad used on a rotary buffer, the Purple Foamed Wool buffing pads take a licking and keep on ticking.

They are easy to control on the Flex 3401 and accentuate the cutting ability of any abrasive product you normally would use with the Flex 3401

http://www.autogeekonline.net/gallery/data/1294/1972Corvette014.jpg



Finishing Touches...

Robert cleaning the inside of the glass windshield with Diamondite Glass and Surface Cleaner (http://www.autogeek.net/diglandsucl.html)


http://www.autogeekonline.net/gallery/data/1294/1972Corvette075.jpg

http://www.autogeekonline.net/gallery/data/1294/1972Corvette076.jpg


Clear as can be...
http://www.autogeekonline.net/gallery/data/1294/1972Corvette078.jpg


This project was done right before we left for SEMA so I didn't get a lot of the process pictures up but I do have the after shots...


Beauty Shots...

http://www.autogeekonline.net/gallery/data/1294/1972Corvette023.jpg

http://www.autogeekonline.net/gallery/data/1294/1972Corvette024.jpg

http://www.autogeekonline.net/gallery/data/1294/1972Corvette026.jpg

http://www.autogeekonline.net/gallery/data/1294/1972Corvette027.jpg

http://www.autogeekonline.net/gallery/data/1294/1972Corvette035.jpg

http://www.autogeekonline.net/gallery/data/1294/1972Corvette036.jpg


Nicole, the girl you saw buffing out the Green 1970 Camaro (http://www.autogeekonline.net/gallery/data/1279/1970Camaro007.jpg) came by to inspect our work...

http://www.autogeekonline.net/gallery/data/1294/1972Corvette022.jpg

http://www.autogeekonline.net/gallery/data/1294/1972Corvette053.jpg

http://www.autogeekonline.net/gallery/data/1294/1972Corvette054.jpg


We topped the Prima Banana with Dodo Juice Banana Armor using LC Gold 5.5" Jeweling pads on both a Meguiar's G110v2 and a Porter Cable 7424XP

http://www.autogeekonline.net/gallery/data/1294/1972Corvette016.jpg

http://www.autogeekonline.net/gallery/data/1294/1972Corvette017.jpg


It's was a little windy in the studio that night...

http://www.autogeekonline.net/gallery/data/1294/Nicole01_jpg.JPG


With a little help from a Metro Vac-N-Blow...

http://www.autogeekonline.net/gallery/data/1294/Nicole02_jpg.JPG


Nicole says the finish looks good...

http://www.autogeekonline.net/gallery/data/1294/1972Corvette008.jpg


More to come...

:)

Mike Phillips
11-29-2011, 06:19 PM
Continued...


Next up is a classic Restorod 1857 Chevy Bel Air with SINGLE STAGE PAINT!

1957 Chevrolet Bel Air - Remove Swirls - Modeled by Kristin (http://www.autogeekonline.net/forum/pictures-autogeek-s-car-week/42954-1957-chevrolet-bel-air-remove-swirls-modeled-kristin.html)


Working on single stage paint is very unique in this day and age as there's just not many cars left to polish that have this kind of paint especially classic Detroit Iron like this as by the time these cars get built they are usually sprayed with a basecoat/clearcoat system.

The paint on this car was completely swirled out by the mis-use of a rotary buffer, kind of like the 1954 Ford F-100 plus it had water spots and medium oxidation over the entire finish.

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover001.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover002.jpg




http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover009.jpg



Getting Started...
First thing we did was to wipe the car clean using Detailer's Pro Series Waterless Auto Wash.

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover017.jpg


Note: Anytime you're working on an antique, classic or rare special interest car it's a good best practice to avoid washing the car using a normal car wash as you will introduce water to places you cannot reach and dry and this can promote rust. Instead use a Waterless Wash to carefully wipe the paint and exterior clean.


After we wiped the car clean next up we inspected the paint to see if it needed to be clayed. We did this with our sense of touch and also by using The Baggie Test (http://www.autogeekonline.net/forum/how-articles/27967-baggie-test-how-inspect-above-surface-bonded-contaminants.html)

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover021.jpg


The paint felt as rough as 80 grit sandpaper so claying was in order... for this we used Pinnacle Ultra Poly Clay with Pinnacle Clay Lubricant.

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover019.jpg


Here's a piece of clay formed into a wafer or patty about 4 to 5 inches in diameter to fit across the width of my 4 fingers... like this...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover023.jpg


The contaminants you see on the clay came from just a small section of paint on the hood. If you look closely you can see a tint of red on the clay and this is overspray paint...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover024.jpg



Test Spot
After claying next we wanted to test and see what ti would take to remove the majority of the swirls, scratches and water spots. For this we used the Pinnacle Advanced Swirl Remover with a Lake Country 6.5" CCS Orange Cutting Pad on a Flex 3401. The tape-line is to make it easy to judge the results between before and after.

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover025.jpg


Before I start, here's the swirls as captured by the flash of my camera...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover027.jpg


Here's the swirls as captured by the Brinkmann Swirl Finder Light...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover028.jpg


At the time I started the test spot we didn't know the paint was single stage, it can be hard to tell between single stage and basecoat/clearcoat just by looking at the car, the best way it to do a test like I outline on page 10 and 11 of my how-to book, either the print version (http://www.autogeek.net/art-of-detailing-paperback-book.html) or the e-book version (http://www.autogeek.net/art-of-detailing-e-book.html).

Another way to test for a single stage or basecoat/clearcoat is to do a test spot... start buffing on the paint and then turn your buffing pad over and inspect...

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover030.jpg


Yep... we're working on red single stage paint as you can see by the red pigment transferring to the face of the buffing pad.

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover031.jpg



After working the Test Spot for about 6-8 Section Passes here's the results... about 95% correction... there were some deeper RIDS everywhere in the paint throughout the car but we don't focus on removing each and every single scratch because we don't know the history of the paint job. Too much risk.

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover032.jpg


I removed the painter's tape and used the flash of my camera to light up the paint...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover033.jpg


The hundreds of thousands of scratches in the paint dulls the appearance by giving the finish a hazy appearance. By removing the swirls, scratches and oxidation will restore the full richness of color with a high gloss shine...

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover035.jpg



Time to get busy...
When you get 5 polishers all buzzing on the car it doesn't take long to get the correction step finished.
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover039.jpg


Here's Adam using the Flex 3401 with a 4" backing plate and a 4" Orange CCS Spot Repair pad.
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover040.jpg



Here's Kyle tackling the roof and back clip of car...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover041.jpg



Pinnacle Advanced Swirl Remover, Lake Country Orange Foam Cutting Pads and Flex 3401 Forced Rotation Dual Action Polishers make quick work of removing the defects and creating a clear, smooth surface perfect for final polishing.

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover043.jpg


More to come...


:)

Mike Phillips
11-29-2011, 06:20 PM
Continued...


The Polishing Step
After we removed the major defects using Pinnacle Advanced Swirl Remover and a Flex 3401, we moved on to the finish polishing step using Porter Cable 7424XP's and the Griot's Garage DA Polisher using Lake Country 5.5" white foam polishing pads to maximize the gloss and clarity of the paint.

Here's Kyle working on the front driver's side fender using a Porter Cable 7424XP
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover052.jpg



Here's Rene using a Porter Cable 7424XP to polish the hood...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover053.jpg


DA Polishers like this PC are compact in size, lightweight and easy to use especially if you're new to machine polishing.
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover054.jpg


5.5" pads fit nicely between body lines and raised curves.
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover055.jpg



Here's PJ machine polishing with a Griot's Garage 6" Random Orbital Polisher...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover057.jpg


Here's Kyle working his way down the car and tackling the rear fender...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover058.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover060.jpg


Here's PJ polishing the roof which was also a single stage paint...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover061a.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover061b.jpg


Here's Rene working around the passenger side mirror...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover062.jpg


Here's Adam machine polishing the inside of the driver's side fin...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover064a.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover064b.jpg


Now the outside of the fin...

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover066.jpg


Fender Skirts...
We placed the fender skirts on the workbench on towels and then two people held them securely while I machine polished them...

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover070.jpg




The Protection Step...
Now comes the fun part! Since we have PJ, one of the founders of Dodo Juice in the house, he's going to show us one option for hand applying a soft paste wax, in this case we're going to use Orange Crush as it's for warm colors like the red/orange on this 1957 Chevy Bel Air.

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover072.jpg


Here' PJ breaks open the seal guaranteeing a never before opened jar of wax...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover073.jpg


Then he rubs his clean fingers over the top of the wax...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover074.jpg


Now he's ready to start waxing the paint...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover075.jpg


PJ shows us his technique of working the wax over the paint with a gentle touch...

As he applies the wax he works around the car... in a few seconds the rest of the team is going to join him and with 4 to 5 people hand waxing the paint it's only going to take minutes even to cover a car as large as this!

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover076.jpg



Here's a thin coating of Orange Crush...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover079.jpg


Super Star!
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover081.jpg


Beauty Shots...

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover093.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover095.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover096.jpg



Kristin stopped by to inspect our work and finds a few wax smudges here and there and gently removes them using a clean microfiber towel while wearing microfiber gloves...
http://www.autogeekonline.net/gallery/data/1308/Kristin1957Chevy001.jpg

http://www.autogeekonline.net/gallery/data/1308/Kristin1957Chevy002.jpg


Here's Kristin inspecting our work using the Brinkmann Swirl Finder Light...
http://www.autogeekonline.net/gallery/data/1308/Kristin1957Chevy004.jpg

http://www.autogeekonline.net/gallery/data/1308/Kristin1957Chevy005.jpg

http://www.autogeekonline.net/gallery/data/1308/Kristin1957Chevy006.jpg


More to come...

:)

Mike Phillips
11-29-2011, 06:42 PM
Continued...


Next up is a WILD 1934 Ford Pick-up with a Blown 426 Hemi Engine...

Blown 1934 Ford Pick-up - Show Car Makeover - Modeled by Kristin (http://www.autogeekonline.net/forum/pictures-autogeek-s-car-week/43007-blown-1934-ford-pick-up-show-car-makeover-modeled-kristin.html)


First thing we did was move the 1934 Ford inside and then wiped the finish down using Detailer's Pro Series Waterless Auto Wash (http://www.autogeek.net/waterless-auto-wash.html).

http://www.autogeekonline.net/gallery/data/1310/Project34001.jpg


After wiping the finish down we felt the paint using our clean hands and also using The Baggie Test.

The Baggie Test - How to inspect for above surface bonded contaminants (http://www.autogeekonline.net/forum/how-articles/27967-baggie-test-how-inspect-above-surface-bonded-contaminants.html)


Both methods of inspecting the paint revealed a very clean and contaminant free finish so we skipped claying the paint.

http://www.autogeekonline.net/gallery/data/1310/Project34002.jpg


Then I did my best to capture the fine or shallow swirls and scratches in the paint... hard to do with a camera but easy enough to see in person with your eyes...
http://www.autogeekonline.net/gallery/data/1310/Project34019.jpg

http://www.autogeekonline.net/gallery/data/1310/Project34021.jpg



Next we cover-up all the brightwork and there's lots of it. Take my word for it, when it comes to projects like this you don't dare get polish spatter dots on the engine or in this example the exposed running gear in the truck bed. It's not professional and besides that it would take you hours to wipe the little dots of polish splatter off.

http://www.autogeekonline.net/gallery/data/1310/Project34024b.jpg


The Autogeek Cover-up Towel is made from soft microfiber and can be washed and re-used. This come in real handy for covering up anything you don't want to get compound or polish splatter dots onto so you won't have to detail these areas with a toothbrush after the the wax has been removed.

http://www.autogeekonline.net/gallery/data/1310/Nicks34pics001.jpg


Here we've covered the polished aluminum gas tank and the chrome independent rear-end...
http://www.autogeekonline.net/gallery/data/1310/Nicks34pics003.jpg


The Polishing or Minor Correction Step
To remove any shallow scratches, scuffs and other imperfections we used the Porter Cable 7424XP, Meguiar's G110v2 and Griot's Garage 6" and 3" DA Polishers with polishing pads and Pinnacle Advanced Finishing Polish.

Here's Brian using the Porter Cable 7424XP with a 5.5" Lake Country Black Flat Foam Polishing Pad with Pinnacle Advanced Finishing Polish on the inner portion of the driver's front fender.
http://www.autogeekonline.net/gallery/data/1310/Project34036.jpg


Here's Tommy using a Meguiar's G110v2 with a 5.5" Lake Country Black Flat Foam Polishing Pad with Pinnacle Advanced Finishing Polish on the driver's side roof.
http://www.autogeekonline.net/gallery/data/1310/Project34037.jpg


Teamwork...
http://www.autogeekonline.net/gallery/data/1310/Project34039.jpg
http://www.autogeekonline.net/gallery/data/1310/Project34041.jpg

http://www.autogeekonline.net/gallery/data/1310/Project34045.jpg


Machine polishing the visor using the Griot's Garage 3" Mini Polisher...
http://www.autogeekonline.net/gallery/data/1310/Project34052.jpg


Machine Waxing - The Protection Step
After carefully wiping off all polishing residue we moved onto applying a coat of Wolfgang Füzion by machine. Two guys will use full size DA's and two of us will be using the 3" DA's...
http://www.autogeekonline.net/gallery/data/1310/Project34059.jpg



I used a hot air gun to heat the outside of the plastic jar so I could slide the wax out as a single chunk of wax and hold it in a clean Microfiber Glove (http://www.autogeek.net/micglovinbul.html)...
http://www.autogeekonline.net/gallery/data/1310/Project34060.jpg



Then carefully swipe it across the face of a clean, foam finishing or waxing pad...
http://www.autogeekonline.net/gallery/data/1310/Project34061.jpg



Tommy machine waxing the rear fender...
http://www.autogeekonline.net/gallery/data/1310/Project34062.jpg



The 3" Mini Polisher with a 3" Red Waxing pad works perfect on the front frame rails...
http://www.autogeekonline.net/gallery/data/1310/Project34065.jpg


Machine waxing the paint in front of the engine...
http://www.autogeekonline.net/gallery/data/1310/Project34068.jpg




Where we couldn't get a machine we used soft Gold Wax Finger Pockets (http://www.autogeek.net/gold-finger-pockets.html) which worked great...
http://www.autogeekonline.net/gallery/data/1310/Project34073.jpg



Time to remove the wax
Microfiber Gloves help you to grip your microfiber towels and they also prevent you from putting fingerprints on the paint...
http://www.autogeekonline.net/gallery/data/1310/Project34075.jpg


For the wax removal step we're using Super Soft Deluxe Green Microfiber Towels with Rolled Edges (http://www.autogeek.net/green-rolled-edge-towels-3.html) these microfiber towels are incredibly soft and gentle to highly polished paint.
http://www.autogeekonline.net/gallery/data/1310/Project34076.jpg



Beauty Shots...

Oh yeah...
http://www.autogeekonline.net/gallery/data/1310/Project34009.jpg


Blown bad boy...
http://www.autogeekonline.net/gallery/data/1310/Project34010.jpg

http://www.autogeekonline.net/gallery/data/1310/Project34078.jpg


Kristin stopped by to inspect our work... looks like we missed a spot...

http://www.autogeekonline.net/gallery/data/1310/Project34080a.jpg

Kristin inspects our work using the Brinkmann Swirl Finder Light (http://www.autogeek.net/brinkmann-swirl-finder-light.html)...

http://www.autogeekonline.net/gallery/data/1310/Project34014.jpg


http://www.autogeekonline.net/gallery/data/1310/Project34081.jpg

The wax label is out of focus because the fender is in focus...
http://www.autogeekonline.net/gallery/data/1310/HandApplyWG06.jpg


More to come...


:)

Mike Phillips
11-29-2011, 07:03 PM
Continued....

Next up... Steve's pristine and very rare 1969 Camaro Pace Car!

1969 Camaro Pace Car - Show Car Makeover - Modeled by Michelle (http://www.autogeekonline.net/forum/pictures-autogeek-s-car-week/43165-1969-camaro-pace-car-show-car-makeover-modeled-michelle.html)


Steve just arrived with his Camaro and the sun is sitting low in the sky but I was able to get a few pictures to show the condition of the paint...

Here's how low the sun was in the sky...

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC023.jpg


Best Sun Swirl Shots I could get...
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC007.jpg

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC009.jpg

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC011.jpg



Here's how the paint looks using the Brinkmann Swirl Finder Light (http://www.autogeek.net/brinkmann-swirl-finder-light.html)

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC024.jpg



Here I'm using the camera flash to light up the swirls and scratches...
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC025.jpg



Close-up: There's scratches and general surface imperfections throughout the finish...
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC026.jpg

Close-up of the paint on the hood...
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC028.jpg



Claying the paint
Next up we wiped the car clean using Detailer's Pro Series Waterless Auto Wash (http://www.autogeek.net/waterless-auto-wash.html) and Pinnacle Clay Lubricant (http://www.autogeek.net/pinclaylub.html), which can be used to remove light dust, smudges and fingerprints.

In this shot, Rene is sharing some tips and techniques on how to carefully wipe a car down... (Thanks Rene!)
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC031.jpg

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC013.jpg

It doesn't take long to wipe a car clean with 7 guys...
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC032.jpg


After wiping the car clean, we felt the paint with our bare hands and also using the baggie test (http://www.autogeekonline.net/forum/how-articles/27967-baggie-test-how-inspect-above-surface-bonded-contaminants.html) and the paint felt pretty rough so we went ahead and clayed each panel using Pinnacle Clay Lubricant (http://www.autogeek.net/pinclaylub.html) and Pinnacle Ultra Poly Clay (http://www.autogeek.net/ultra-fine-poly-clay.html).



Same thing... it doesn't take long to clay an entire car with 8 guys claying the paint...
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC033.jpg


In this picture, Robert from Impressions Fine Auto Detailing and a regular here at our weekly projects shares with Ron, (in the blue shirt), how to use detailing clay the right way. These projects are a great way to learn about products and techniques by guys that have been doing this for years...
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC034.jpg


Here's Hector and Glen claying the rear clip of the Camaro... Hector is going to be one heck of a Pro Detailer if he keeps attending our weekly projects plus he's going to get to work on a lot of really cool cars. Glen is to the right helping with the claying step.
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC036.jpg


Pictured with the green microfiber towel over his shoulder is Steve the owner. I want to thank Steve for trusting Autogeek with his precious car... you're in good hands at Autogeek...
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC039.jpg


The Major Correction Step

We tested was Purple Foamed Wool pads with Pinnacle Advanced Swirl Remover wit the Flex 3401 and this combination easily removed 98% of the swirls and scratches while leaving the finish incredibly glossy...

Here's Rene and Kyle working on the hood...
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC047.jpg


While they tackled the hood I knocked out the panel in front of the hood and some of the tops of the fenders...

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC015.jpg




Meanwhile Adam is using a 3" pad on the Flex PE14 to work out scratches from thinner panels on the Camaro...
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC049.jpg

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC051.jpg




The Polishing or Minor Correction Step
After we removed all the defects we moved onto machine polishing the paint to a high gloss, for this we switched over to DA Polishers and the Cyclo Polisher.

Here's Steve the owner of the Camaro testing out a Porter Cable 7424XP on the hood; this is the first time he's ever machine polished and after a few minutes of machine polishing he agrees it's the only way work on clear coat paints...
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC052.jpg


Here's Glen polishing with the Porter Cable 7424XP
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC053.jpg


Steve decides to give the Cyclo a try...
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC054.jpg


http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC056.jpg


On the back rear fender, Hector is using the Cyclo to polish the paint to a clear, high gloss... this guy has only been to a couple of our Thursday night projects and he's already becoming very good at machine polishing paint.
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC057.jpg



Scott tests out the Meguiar's G110v2, this is also his first time machine polishing...
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC060.jpg


Ron is da man! Check out how he flips the Cyclo vertically to tackle the back face of the rear spoiler...
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC061.jpg


This is the new Cyclo Mark 5 Variable Speed Polisher which you can tell by the variable speed dial just below his right hand...
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC062.jpg


More to come...

:)

Mike Phillips
11-29-2011, 07:04 PM
Continued...


The protection step - sealing the paint...
After wiping all the polish residue off the paint it's time to seal the paint with a coat of wax for this project we're going to machine apply Pinnacle XMT 180 High Gloss Carnauba Paste Wax (http://www.autogeek.net/xmt-180-carnauba-wax.html) using DA Polishers


In order to get the wax out of the jar you can lightly heat the outside using a hair blow dryer or in my case I'm using a heat gun...
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC063.jpg


After knocking the wax out of the jar it's a good idea to have a microfiber glove on to help you gently grip the wax as you spread it over the face of pad.

Scott is ready to start machine waxing with the Griot's Garage 6" Random Orbital Polisher (http://www.autogeek.net/griots-random-orbital-polisher.html)

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC065.jpg

One more swipe across the face of the pad and Ron will be ready to start machine waxing with the Porter Cable 7424XP (http://www.autogeek.net/dual-action-polishers.html)

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC067.jpg


Scott using the Griot's and Steve using the Meguiar's G110v2 (http://www.autogeek.net/meguiars-dual-action-polisher-g110.html) to machine apply wax...
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC070.jpg


Ron machine waxing the rear spoiler...
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC073.jpg

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC074.jpg


After the guys apply the wax Rene and Kyle follow behind gently removing the excess wax off the paint...
http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC076.jpg


Beauty Shots...

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC089.jpg

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC090.jpg

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC091.jpg

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC092.jpg

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC093.jpg

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC094.jpg

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC095.jpg

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC099.jpg

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC016.jpg

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC017.jpg

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC019.jpg



Michelle stopped by to inspect our results...

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC102.jpg

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC103.jpg

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC104.jpg

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC107.jpg

http://www.autogeekonline.net/gallery/data/1315/1969CamaroIndyPC108.jpg


More to come...


:)

Mike Phillips
11-29-2011, 07:14 PM
Next up is Chris's 2011 Synergy Green Camaro which takes place this Thursday!

I have not seen this car in person but I'm a big fan of giving people and cars the benefit of the doubt. So until the car arrives we'll just have to bide our time...

This is going to be a fun project because our special VIP guest will be PJ from Dodo Juice Carnauba Waxes and we're going to apply their new Home Brew do-it-yourself wax after we address any paint correction issues if needed.


Here's the wax we're going to use.... my son named it...

Cucumber Explosion!

Before
http://www.autogeekonline.net/gallery/data/715/DodoJuiceWaxKit02.jpg




After

After making the wax we let it cool and fully set-up through the weekend...
http://www.autogeekonline.net/gallery/data/1324/CucumberExplosioin01.jpg


The way the wax looks here is normal...
http://www.autogeekonline.net/gallery/data/1324/CucumberExplosioin02.jpg


Cucumber Explosion!
http://www.autogeekonline.net/gallery/data/1324/CucumberExplosioin03.jpg


Sealed till this Thursday's Autogeek's Car of the Week project...
http://www.autogeekonline.net/gallery/data/1324/CucumberExplosioin04.jpg


Get your own here...

Dodo Juice Home Brew Wax Kit (http://www.autogeek.net/dodo-juice-home-brew-wax-kit.html)


And here's the project car ...

Chris's 2011 Synergy Green Camaro
http://www.autogeekonline.net/gallery/data/1318/SynergyGreenCamaro01.jpg

http://www.autogeekonline.net/gallery/data/1318/SynergyGreenCamaro02.jpg


We also have a returning featured car... Tommy and Nicole's 1970 1/2 Camaro...

http://www.autogeekonline.net/gallery/data/1279/1970Camaro064.jpg


The fun starts at 5:00pm on Thursday and goes to 10:00pm so clear your schedules and plan to be here for a night of learning and lot of fun too!


http://www.autogeekonline.net/forum/images/smilies/dblthumb2.gif

Mike Phillips
11-29-2011, 07:16 PM
***Placeholder #1 ***

This is for the before, process and beauty shots after we finish the 2011 Synergy Green Camaro...



:Picture:

Mike Phillips
11-29-2011, 07:16 PM
***Placeholder #2 ***

This is for the before, process and beauty shots after we finish the 2011 Synergy Green Camaro...



:Picture:

Mike Phillips
11-29-2011, 07:17 PM
And that's the history so far for Autogeek's Car of the Week!


:xyxthumbs: