jamores23
11-19-2011, 08:20 AM
Well, this was my first time ever using cquartz. this car received a 3 step correction. total time was 21 hours. cquartz was a pain in the but at first until I spoke to a few forum members which helped me out alot. the instructions on cquartz says 5-10 minutes dry time for 81F . that didnt quite work out. I ended up trying 15/20/25/30min I found that the 30 min dry time was what I was looking for. after I got that down everything else went smooth. I really liked the way d301 finished down on this car. I will let you guys decide which one looks better 301 or cquartz. I will keep my personal opinion to myself until i get a few responses :)
products used:
LOTS of microfibers
GG DA
megs mf cutting and finishing discs
megs m105, d300, d301.
megs aggressive clay
surbuffs
UTTG
opt protectant plus
vac
vx5000 multiple attachments
popsicle sticks
apc plus
IPA
dawn soap
2 buckets/grit gaurds
microfiber wash mit
wheels brushes/daytona speed brush
pad brush
ONR as clay lube
terry towels for steam machine (vx5000)
cquartz
reload
detailing q-tips
elbow grease
and i dont remember everything else lol
before
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1418.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1421.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1422.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1425.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1427.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1428.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1430.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1431.jpg
IRON X
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1432.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1434.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1437.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1439.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1440.jpg
rinsing off iron x
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1441.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1445.jpg
50/50 shot
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1446.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1447.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1451.jpg
here, if you look closely I taped off a square section which was compounded out. you can see if you look closely "the halogen bulb on the left is showing the side that was compounded and the one to the right is where there are imperfections. those with a eye for detailing will see it"
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1448.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1449.jpg
products used:
LOTS of microfibers
GG DA
megs mf cutting and finishing discs
megs m105, d300, d301.
megs aggressive clay
surbuffs
UTTG
opt protectant plus
vac
vx5000 multiple attachments
popsicle sticks
apc plus
IPA
dawn soap
2 buckets/grit gaurds
microfiber wash mit
wheels brushes/daytona speed brush
pad brush
ONR as clay lube
terry towels for steam machine (vx5000)
cquartz
reload
detailing q-tips
elbow grease
and i dont remember everything else lol
before
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1418.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1421.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1422.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1425.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1427.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1428.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1430.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1431.jpg
IRON X
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1432.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1434.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1437.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1439.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1440.jpg
rinsing off iron x
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1441.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1445.jpg
50/50 shot
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1446.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1447.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1451.jpg
here, if you look closely I taped off a square section which was compounded out. you can see if you look closely "the halogen bulb on the left is showing the side that was compounded and the one to the right is where there are imperfections. those with a eye for detailing will see it"
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1448.jpg
http://i1221.photobucket.com/albums/dd477/jamores23/IMG_1449.jpg