1957 Chevrolet Bel Air - Remove Swirls - Modeled by Kristin

[Mike Phillips]

1957 Chevrolet Bel Air - Remove Swirls - Modeled by Kristin (http://www.autogeekonline.net/forum/pictures-autogeek-s-car-week/42954-1957-chevrolet-bel-air-remove-swirls-modeled-kristin.html)


Here's our project car for this week's "Autogeek's Car of the Week", it's a 1957 Chevy Bel Air that's a restorod in very nice condition except the paint is completely thrashed.

In the video and pictures below I document the true and accurate condition of the paint before me, PJ from Dodo Juice and a team of "Car Guys" attack it to remove the swirls and restore a show car finish.


1957 Chevrolet Bel Air - Completely filled with Swirls & Scratches
[ame=http://www.youtube.com/watch?v=B31shno2TnU&hd=1]1957 Chevy Bel Air Remove Swirls by Machine - YouTube[/video]


http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover001.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover002.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover003.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover004.jpg


http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover005.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover006.jpg


http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover007.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover008.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover009.jpg


http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover010.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover011.jpg


http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover012.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover013.jpg


http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover014.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover015.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover016.jpg


This is going to be a challenge to get this done by 9:30 as that's when Kristin our new Swirl Girl arrives to inspect our work with the Brinkmann Swirl Finder Light.


Stay tuned...

:D

[Mike Phillips]

Getting Started...

First thing we did was to wipe the car clean using Detailer's Pro Series Waterless Auto Wash.

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover017.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover018.jpg


Note: Anytime you're working on an antique, classic or rare special interest car it's a good best practice to avoid washing the car using a normal car wash as you will introduce water to places you cannot reach and dry and this can promote rust. Instead use a Waterless Wash to carefully wipe the paint and exterior clean.



After we wiped the car clean next up we inspected the paint to see if it needed to be clayed. We did this with our sense of touch and also by using The Baggie Test (http://www.autogeekonline.net/forum/how-articles/27967-baggie-test-how-inspect-above-surface-bonded-contaminants.html)

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover020.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover021.jpg


The paint felt as rough as 80 grit sandpaper so claying was in order... for this we used Pinnacle Ultra Poly Clay with Pinnacle Clay Lubricant.

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover019.jpg


Here's a piece of clay formed into a wafer or patty about 4 to 5 inches in diameter to fit across the width of my 4 fingers...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover022.jpg


Like this...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover023.jpg


The contaminants you see on the clay came from just a small section of paint on the hood. If you look closely you can see a tint of red on the clay and this is overspray paint...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover024.jpg


Test Spot
After claying next we wanted to test and see what ti would take to remove the majority of the swirls, scratches and water spots. For this we used the Pinnacle Advanced Swirl Remover with a Lake Country 6.5" CCS Orange Cutting Pad on a Flex 3401. The tape-line is to make it easy to judge the results between before and after.

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover025.jpg


Before I start, here's the swirls as captured by the flash of my camera...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover026.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover027.jpg


Here's the swirls as captured by the Brinkmann Swirl Finder Light...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover028.jpg


At the time I started the test spot we didn't know the paint was single stage, it can be hard to tell between single stage and basecoat/clearcoat just by looking at the car, the best way it to do a test like I outline on page 10 and 11 of my how-to book, either the print version (http://www.autogeek.net/art-of-detailing-paperback-book.html) or the e-book version (http://www.autogeek.net/art-of-detailing-e-book.html).

Another way to test for a single stage or basecoat/clearcoat is to do a test spot... start buffing on the paint and then turn your buffing pad over and inspect...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover029.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover030.jpg



Yep... we're working on red single stage paint as you can see by the red pigment transferring to the face of the buffing pad.

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover031.jpg



After working the Test Spot for about 6-8 Section Passes here's the results... about 95% correction... there were some deeper RIDS everywhere in the paint throughout the car but we don't focus on removing each and every single scratch because we don't know the history of the paint job. Too much risk.

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover032.jpg


I removed the painter's tape and used the flash of my camera to light up the paint...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover033.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover034.jpg



The hundreds of thousands of scratches in the paint dulls the appearance by giving the finish a hazy appearance. By removing the swirls, scratches and oxidation will restore the full richness of color with a high gloss shine...

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover035.jpg


When I did the Test Spot, I was making the mistake of assuming the paint was a basecoat/clearcoat finish so I started with a foam cutting pad. Once we discovered we were working on a single stage paint I asked PJ to re-test using a the same product but using a less aggressive pad like a 6.5 foam polishing pad. This was just to check and see if we could remove the defects using a less aggressive approach.

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover036.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover037.jpg


Here you can see red pigment coming off onto a white polishing pad....
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover038.jpg


What we found out was that the white polishing pad just didn't offer enough cutting ability to match the speed of defect removal we were getting with the orange cutting pad. Se we all put orange cutting pads on our polishers and went to work.



When you get 5 polishers all buzzing on the car it doesn't take long to get the correction step finished.
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover039.jpg


Here's Adam using the Flex 3401 with a 4" backing plate and a 4" Orange CCS Spot Repair pad.
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover040.jpg



Here's Kyle tackling the roof and back clip of car...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover041.jpg


We don't have a lift at this time so if you can't bring the car up to you.... you have to lower yourself to the car... (Thanks PJ)
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover042.jpg



Pinnacle Advanced Swirl Remover, Lake Country Orange Foam Cutting Pads and Flex 3401 Forced Rotation Dual Action Polishers make quick work of removing the defects and creating a clear, smooth surface perfect for final polishing.

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover043.jpg



:)

[Mike Phillips]

Continued...


Pad Cleaning
When you're working on a single stage paint it's very easy to see that you have "removed paint" building up on the face of the pads.

This same thing happens when you're polishing a basecoat/clearcoat paint job it just that you can't see the residue build because the paint is clear instead of pigmented.

Here's Adam with a dirty pad on a Flex PE 14 with an extension on the spindle to make cleaning pad easier.

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover044.jpg


We used DP Polishing Pad Rejuvenator inside the Grit Guard Universal Pad Washer to help us get the pads clean.

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover045.jpg



I had Adam spin around so the car would be in the background instead of a garage door...

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover046.jpg


Here you can see the pad is back to it's orange color as the majority of the pigmented paint and polishing residue has been removed.

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover047.jpg


Here's Adam sharing his secret technique for cleaning pads if you don't have a pad washer.
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover048.jpg


Sling most of the cleaning solution out of the pads using the rotary buffer by bringing up the RPM's while the pad is still inside the bucket. Then to get the pad a little dryer you can squeeze the pad inside an absorbent terry cloth towel like you see Adam doing here.
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover049.jpg


http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover050.jpg

Again, if we were working on a clear coat finish there would be paint transfer to the towel it's just that you can't see it. That's why anytime your abrading paint you need to clean your pads. See this article,



http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover051.jpg


Why it's important to clean your pads often... (http://www.autogeekonline.net/forum/tricks-tips-techniques/28755-why-s-important-clean-your-pads-often.html)


The Polishing Step

After we removed the major defects using Pinnacle Advanced Swirl Remover and a Flex 3401, we moved on to the finish polishing step using Porter Cable 7424XP's and the Griot's Garage DA Polisher using Lake Country 5.5" white foam polishing pads to maximize the gloss and clarity of the paint.

Here's Kyle working on the front driver's side fender using a Porter Cable 7424XP
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover052.jpg



Here's Rene using a Porter Cable 7424XP to polish the hood...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover053.jpg


DA Polishers like this PC are compact in size, lightweight and easy to use especially if you're new to machine polishing.
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover054.jpg


5.5" pads fit nicely between body lines and raised curves.
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover055.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover056.jpg



Here's PJ machine polishing with a Griot's Garage 6" Random Orbital Polisher...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover057.jpg


Here's Kyle working his way down the car and tackling the rear fender...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover058.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover059.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover060.jpg


Here's PJ polishing the roof which was also a single stage paint...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover061a.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover061b.jpg


Here's Rene working around the passenger side mirror...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover062.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover063.jpg


Here's Adam machine polishing the inside of the driver's side fin...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover064a.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover064b.jpg


Now the outside of the fin...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover065.jpg


http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover066.jpg


After polishing the passenger's side of the roof PJ moves to the other side and polishes the driver's side of the roof...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover067.jpg


Kyle finishing the fender where the fender skirts attatch...

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover068.jpg


We placed the fender skirts on the workbench on towels and then two people held them securely while I machine polished them...

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover070.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover071.jpg



Pinnacle Advanced Finishing Polish worked excellent to maximize gloss and clarity and perfectly prepare the paint for application of wax.
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover069.jpg

[Mike Phillips]

The Protection Step...

Now comes the fun part! Since we have PJ, one of the founders of Dodo Juice in the house, he's going to show us one option for hand applying a soft paste wax, in this case we're going to use Orange Crush as it's for warm colors like the red/orange on this 1957 Chevy Bel Air.


http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover072.jpg


Here' PJ breaks open the seal guaranteeing a never before opened jar of wax...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover073.jpg


Then he rubs his clean fingers over the top of the wax...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover074.jpg


Now he's ready to start waxing the paint...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover075.jpg


PJ shows us his technique of working the wax over the paint with a gentle touch...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover076.jpg



As he applies the wax he works around the car... in a few seconds the rest of the team is going to join him and with 4 to 5 people hand waxing the paint it's only going to take minutes even to cover a car as large as this!

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover077.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover078.jpg


Here's a thin coating of Orange Crush...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover079.jpg


Flying his colors...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover080.jpg


Super Star!
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover081.jpg


:xyxthumbs:

[Mike Phillips]

Metal Polishing

Adam tends to take on the responsibility for making sure all the brightwork is polished and protected and he does a great job. Thank you Adam!

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover082.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover083.jpg


Before
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover084.jpg


After
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover085.jpg


Before
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover086.jpg


After
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover087.jpg


Before
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover088.jpg


After
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover089.jpg


After Shots - Lots of chrome on these classic Shoebox Chevys...
http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover090.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover091.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover092.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover093.jpg



Here's some after shots of the paint after polishing with Pinnacle and then waxing with Dodo Juice Orange Crush...

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover094.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover095.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover096.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover097.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover098.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover099.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover100.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover101.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover102.jpg

http://www.autogeekonline.net/gallery/data/1308/1957BelairExtremeMakeover103.jpg

[Mike Phillips]

Products Used

All the products and techniques we used to restore a show car finish to this beautiful 1957 Chevrolet Bel Air can be found on Autogeek.net, I've included links to each product below.


All we did as far as techniques go are the basics that are covered in my how-too book both the print version and the e-book version and also in my DVD on machine polishing.

If after looking at the before and after pictures you think you want to tackle your own car detailing project then I encourage you to take the first step and that's gather your supplies and then read-up on the different procedures you'll be doing and then go out into your garage and have some fun.

If you get stuck on anything or for any reason, simply post to our forum what's going or any issues you're having and myself and the rest of the members of this forum will do our best to see you through to success...


On Autogeek.net


Tools
Flex PE 14 (http://www.pinnaclewax.com/flex-pe14-2-150-rotary-polisher.html)
Flex 3401 (http://www.pinnaclewax.com/flex-dual-action-polisher-xc3401.html)
Porter Cable 7424XP (http://www.pinnaclewax.com/dual-action-polisher.html)
Griot's Garage 6" ROP (http://www.autogeek.net/griots-random-orbital-polisher.html)
Meguiar's G110v2 (http://www.autogeek.net/meguiars-dual-action-polisher-g110.html)


Buffing Pads
6.5" Lake Country CCS Pads (http://www.autogeek.net/lake-country-ccs-6pack.html)
6.5" Lake Country Flat Pads (http://www.autogeek.net/vcpad.html)
5.5" Lake Country CCS Pads (http://www.autogeek.net/ccs-5-5inch-foam-buffing-pads.html)
5.5" Lake Country Flat Pads (http://www.autogeek.net/lake-country-beveled-edge-pads.html)
4" Lake Country CCS Spot Repair Pads (http://www.autogeek.net/4inch-spot-buffs.html)


Medium Cut Polish
Pinnacle Advanced Swirl Remover (http://www.pinnaclewax.com/pin220.html)


Fine Cut Polish

Pinnacle Advanced Finishing Polish (http://www.pinnaclewax.com/pin230.html)


Wax
Dodo Juice Orange Crush Soft Wax 250 ml (http://www.autogeek.net/orange-soft-carnauba-wax.html)


Metal Polish
Wolfgang MetallWerk™ Concours Aluminum Polish (http://www.autogeek.net/wolfgang-metallwerk-concours-aluminum-polish.html)


Microfiber Towels
Super Soft Deluxe Green Microfiber Towels with Rolled Edges (http://www.autogeek.net/green-rolled-edge-towels-3.html)


Miscellaneous Items
Gold Wax Finger Pocket (http://www.autogeek.net/gold-finger-pockets.html)
Microfiber Gloves (http://www.autogeek.net/micglovinbul.html)
Brinkmann Swirl Finder Light (http://www.pinnaclewax.com/brinkmann-light-special.html)
Kreepstool Rolling Utility Seat (http://www.autogeek.net/kreepstool-rolling-utility-seat.html)





Resources

E-book (http://www.autogeek.net/art-of-detailing-e-book.html)
(Displayed on iPad - iPad not included)
http://www.autogeekonline.net/gallery/data/715/medium/EbookCarWashingPage.jpg

Paperback
http://www.autogeekonline.net/gallery/data/715/medium/paperbackDetailingBook01.jpg (http://www.autogeek.net/art-of-detailing-paperback-book.html)

Mike Phillips' Principles of Machine Polishing
http://www.autogeekonline.net/gallery/data/824/AGSCGDVD001.jpg (http://www.autogeekonline.net/forum/new-car-care-products/24852-autogeek-show-car-garage-video.html)



:xyxthumbs:

[Kristin]

I’m excited to work with the Transformation Team on tonight’s project!

[CEE DOG]

Welcome to AG Kristin!

Looking forward to the great job I know all of you will do.

[C. Charles Hahn]

Wow... nice car! I'm jealous. All I've got to work on tonight is a black Harley.

[Mike Phillips]

Hey can all my forum friends help me to give Kristin an Autogeek warm welcome?
(Yes, that's an encouragement to reply to this thread)

http://www.autogeekonline.net/gallery/data/1308/Kristin.jpg


I've created a temporary Avatar for her and after tonight's project I'll update it with a picture from this 1957 Chevy Extreme Makeover project.


:)

[Finemess]

Hello and welcome Kristin, nice to see you, to see you nice.

[tw33k2514]

Welcome Kristin! Cant wait to see your work.

[IID]

Welcome Kristin.
How exciting to see such a pretty face around here!

[FUNX650]

I've created a temporary Avatar for her and after tonight's project I'll update it with a picture from this 1957 Chevy Extreme Makeover project.

:)

Hi Kristen. Welcome to AGO. I'm yet again inspired by Mr. Phillips' choice of who is to be a member of the Swirl Girl Team.:wow:

Mike....I see absolutely nothing wrong with Kristen's current avatar. :D

Perhaps an addition of the '57 won't be too much of a distraction, though.

:)

Bob

[Jons6.7]

Welcome to AG Kristin!