PDA

View Full Version : Full detail on my Jeep this weekend


muscle
10-07-2011, 06:08 AM
I got my goodies in from last weeks sale. My plans are to start a full detail on my Jeep after work tonight. Below is my planned process. What do you think?

Interior:


Vacuum and blow out interior
It was recently shampooed
Wipe down all surfaces to remove megs ult protectant
Apply CarPro PERL to entire interior
Windows


Exterior:


Purple Power Wash to remove any remaining sealant
Scrub wheels
Clay paint if needed (this was already done about 4 to 6 weeks ago)
Clay rims
megs 105 on areas that previous correction (using meg ult compound) didn't get good enough
megs 205 on all paint
Purple Power Wash and check correction in full sun
BLACKFIRE Wet Diamond All Finish Paint Protection
wait 8-12 hours
Collinite #845 on all paint, door jams, and rims
Apply PERL to all external trim, tires, engine compartment
Windows
BobbyG
10-07-2011, 06:19 AM
I think you pretty much nailed it now all you need is about 8 full hours and you'll have it finished!

Be careful with Purple Power on the paint. It's a pretty strong cleaner and can damage the finish if used undiluted and allowed to sit.
CaneCharger
10-07-2011, 06:33 AM
Make sure you take PICS!!!
LuxuryMobile
10-07-2011, 08:12 AM
Sounds good, the only thing I would add is what Bobby mentioned.

Dilute the Purple Power if you plan on spraying it on any painted surfaces.
muscle
10-07-2011, 08:35 AM
I think you pretty much nailed it now all you need is about 8 full hours and you'll have it finished!

Be careful with Purple Power on the paint. It's a pretty strong cleaner and can damage the finish if used undiluted and allowed to sit.

I was going to do a 10:1 solution on paint and 5:1 on wheels.

I'm hoping to get the interior done today. Maybe even the engine compartment. This way I can focus on the exterior tomorrow.
muscle
10-07-2011, 08:39 AM
Make sure you take PICS!!!

I will. It's already in good condition now as I did a correction with megs ult compound, colorx, and ult wax a few weeks ago. I want to take it to the next level. Over the last few weeks, I've been slowly getting the engine compartment clean. Now it's about ready for PERL.




Thanks, everyone!