Gold Coast Corvette Club - First Annual Car Show

[Mike Phillips]

Gold Coast Corvette Club - First Annual Car Show (http://www.autogeekonline.net/forum/off-topic/40573-gold-coast-corvette-club-first-annual-car-show.html)


This last Sunday, September 4th, 2011 I visited Ron Pabisz, the Vice President of the Gold Coast Corvette Club (http://www.goldcoastcorvetteclub.com/) and checked out some of the exceptional Corvettes at their first car show as a new club sponsored by the PGA National Resort & Spa. Also present at the car show were Corvettes from the Sting Rays Corvette Club (http://www.stingrayscorvetteclub.com/) as well as street rods from the South East Rod & Customs car club.


First up was Jim Campbell with his 1972 custom Corvette and special guests from the U.S. Marines.

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub001.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub001a.jpg

Everyone, young and old loved Jim's Corvette...
http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub002.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub003.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub004.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub005.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub006.jpg


50's style display...
http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub007.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub008.jpg


Every inch of this 1955 Chevrolet First Series owned by Dave Walker is painted, polished and shined till it blinds you to look at!
http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub009.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub010.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub011.jpg


This is Ron Pabisz's 2008 Corvette Coupe Edelbrock Eforce Super Charger running about 630 horsepower! The driver's name is Jeffery!
http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub012.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub013.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub014.jpg


Over 200,000 thousand miles on this 1988 Corvette...
http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub015.jpg



More to come...


:xyxthumbs:

[Mike Phillips]

Continued...

I'm pretty good about getting pictures... but can't take pictures, talk to people and memorize make, year model, engines size, customizations, owners, etc.

So enjoy the pictures...

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub016.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub017.jpg


This had some pretty wild Can-Am body modification done to it, I'm going to try to contact the owner and have him bring his car down to the Autogeek's Show Car Garage to for a little swirl removal and show car quality paint polishing...
http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub018.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub019.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub020.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub021.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub022.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub023.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub024.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub025.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub026.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub027.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub028.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub029.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub030.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub031.jpg


More to come... :xyxthumbs:

[Mike Phillips]

Just to note while I'm in-between cropping, resizing, uploading and inserting photos into this thread, most people are really good at taking pictures... it's getting them onto the "Internet" in a way that people can see them easily without having to horizontal scroll.

Here's my solution to the issue....

If you're going to be a "Forum Person" on ANY forum, help yourself by learning how to work with picture on the Internet (http://www.autogeekonline.net/forum/off-topic/40083-if-you-re-going-forum-person-any-forum-help-yourself-learning-how-work-picture-internet.html)




In the above article you'll find the links to these articles that you can use to teach yourself how to get the pictures out of your camera and onto the Internet so everyone can enjoy them...



How to resize your photos before uploading to a photo gallery (http://www.autogeekonline.net/forum/tips-techniques-how-articles-interacting-discussion-forums/35250-how-resize-your-photos-before-uploading-photo-gallery.html) - Using Easy Thumbnails

How to upload a photo into your Autogeek Photo Gallery (http://www.autogeekonline.net/forum/how-do-different-types-things-ag-discussion-forum/21295-how-upload-photo-into-your-autogeek-photo-gallery.html)

How to insert an image from your photo gallery into your message (http://www.autogeekonline.net/forum/how-articles-discussion-forums/21313-how-insert-image-your-photo-gallery-into-your-message.html)





And here's a few more on the topic of photography...

How-To capture swirls, scratches, etchings and other surface defects with your camera (http://www.autogeekonline.net/forum/tips-techniques-how-articles-interacting-discussion-forums/26917-how-capture-swirls-scratches-etchings-other-surface-defects-your-camera.html)

How-to work with pictures on discussion forums (http://www.autogeekonline.net/forum/how-articles-discussion-forums/21320-how-work-pictures-discussion-forums.html)

How to crop out the fluff and resize your pictures! - Using FREE online software! (http://www.autogeekonline.net/forum/tips-techniques-how-articles-interacting-discussion-forums/23918-how-crop-out-fluff-resize-your-pictures-using-free-online-software.html)

Photobucket and Missing Pictures (http://www.autogeekonline.net/forum/off-topic/23699-photobucket-missing-pictures.html)

Handiest little picture viewer tool I've been using for years now... (http://www.autogeekonline.net/forum/tips-techniques-how-articles-interacting-discussion-forums/26202-handiest-little-picture-viewer-tool-i-ve-been-using-years-now.html)




We no return you to your regularly scheduled car show thread....


:D

[Porsche Pilot]

Great post Mike. Excellent photography as usual. Looks a good time had by all. I saw a few things I need...mirrors to park over and a giraffe wearing a scarf. Must have!

[Harleyguy]

Thanks for sharing Mike it's shows like that I miss my Corvette

[V3AutoDetailing]

Alot of very nice cars.

[Mike Phillips]

Continued...


Big Blocks everyhwere...
http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub032.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub033.jpg



My good friend Phil the owner of Snake Road Auto Salvage owns this beautiful 1932 Ford... I met Phil when I asked him if I could buff on "just" some hood on some cars in his salvage yard for the first e-book I wrote for a section on doing Test Spots. And not only did he say yes, he used a frontend loader to pick them up and place them all in one place to make it faster and a heck of a lot easier. (Thanks Phil)

Here's Phil...
http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub036.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub034.jpg
http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub037.jpg


Here's Snake Road Auto Salvage - Very clean, well organized and well run.
http://www.autogeekonline.net/gallery/data/715/TestSpotDaySnakeRoad01.jpg


This shot was taken 180 Degrees from where the above shot was taken, that is I'm behind the building now pretty much parallel to where I was standing in front of the building when I took this shot and you can see the cars that Phil lined up for me. I went out in the yard and picked anything that had pretty good paint on the hood and then placed a large X on the hood using 3M Green Painter's Tape and he brought it to the pavement.

http://www.autogeekonline.net/gallery/data/715/SnakeRoadTestSpot01.jpg


For the "Test Spot" section in the e-book (http://www.autogeekonline.net/forum/off-topic/39621-title-suggestions-first-e-book.html) I demonstrate doing test spots with most of the products on the parts cart using DA Polishers that you see carefully resting on the hoods of the demo cars.
http://www.autogeekonline.net/gallery/data/715/SnakeRoadTestSpot02.jpg

http://www.autogeekonline.net/gallery/data/715/SnakeRoadTestSpot03.jpg


I think Phil thought I was crazy at first but then he came out and watched me and we talked and while we were talking I explained the purpose of doing a "Test Spot" and some tips and techniques for polishing paint and I'm happy to say the the finish on his 32 Ford was swirl free even in the bright, Florida sunlight at noon...

Good job Phil :buffing:



http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub038.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub039.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub042.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub040.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub041.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub043.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub044.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub045.jpg


More to come... :xyxthumbs:

[Mike Phillips]

Continued...

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub046.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub047.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub048.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub049.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub050.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub052.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub053.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub054.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub055.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub056.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub057.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub058.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub059.jpg


More to come... :xyxthumbs:

[Mike Phillips]

Continued...


Slotted Mags are my favorite type of wheel... they sure work well on the Vette...

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub060.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub061.jpg



Just the other day ago here on the forum we were talking about magnesium wheel. I asked the guys standing in front of this Mercury if they knew the owner or where he was so I could ask him if these were the real deal or reproductions but couldn't find him.
http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub062.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub063.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub064.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub065.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub066.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub067.jpg


Here's a vintage ad for Halibrand Magnesium Wheels...
http://www.autogeekonline.net/gallery/data/722/HalibrandEngineeringAd.jpg


Here's the thread we were talking about magnesium wheels....

How to determine what a wheel is made of ? (http://www.autogeekonline.net/forum/auto-detailing-101/40088-how-determine-what-wheel-made.html)



Talked to the owner of these sweet 1970 1/2 Split Front Bumper Camaro... we might see it here at our studio in the future...
http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub068.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub069.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub070.jpg



More to come...

:Picture:

[kimtyson]

Really nice pics. Thanks for sharing, Mike. Looks like you had a great day!

[Mike Phillips]

Really nice pics. Thanks for sharing, Mike. Looks like you had a great day!

Fast & Furious Picture Taking - That's a technique for car shows or all you get is butts and elbows.

More to come but had to take a break and buff out a car tonight...


:buffing:

[Mike Phillips]

Continued...

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub071.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub072.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub073.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub074.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub075.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub076.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub077.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub078.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub079.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub080.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub081.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub082.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub083.jpg


More to come... :xyxthumbs:

[Mike Phillips]

Continued...

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub084.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub085.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub086.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub087.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub088.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub089.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub090.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub091.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub092.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub093.jpg


More to come... :xyxthumbs:

[Mike Phillips]

Continued...

This is Franklin Feiler's 1939 Lincoln Zephyr built by Superior Custom Classics in Hudson, Florida. The paint color is House of Colors Sunset Orange.

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub0932.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub095.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub096.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub097.jpg

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub098.jpg


http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub099.jpg



Scrape
I don't know who made the body for Franklin's 1939 Lincoln Zephyr but I worked with Terry Cook, the guy that originally created Scrape, the car the above body style was designed from. Terry combined the the back half of the 1938/1939 body with the front half of the 1940/1941 Lincoln Zephyr to create a car he called Scrape.

http://www.decorides.com/images/purplezephyr.jpg


You can read all about how Scrape was created here,

Elements of STYLE- The Birth of a Legend (http://www.decorides.com/elementsofstyle.htm)
http://www.decorides.com/images/zephyrhistory/zephbrochurecover480.jpg

Terry Cook
http://www.decorides.com/images/whoisterry/terrysitsinboattail.jpg

I have a keen interest in Scrape and all the variants from my past work with Terry Cook while I worked for Bill Stuart, the owner of the Absorber synthetic drying chamois. Bill had me tour with Terry and Scrape helping to set up the booth, prep Scrape for display and then share the benefits and features of the Absorber. Here's a shot of one of the booths.

http://www.delahayeusa.com/images/scrape1939zephyr_320px.jpg



In this photo I was applying Meguiar's M98 Medallion to Scrape at the Portland Roadster Show getting ready for the show to open. Ever since working with Terry and Scrape I've had keen interest in Lincoln Zephyrs just from my experience with Scrape.
http://www.showcargarage.com/gallery/files/1/ScrapeWithM98.jpg


Just to note, when I first started working with Terry Cook I didn't know he was the Editor for Hot Rod Magazine at one time. Once I found out he offered to edit my first how-to book, "The Art of Polishing Paint". I'm sorry to say that I never finished the second version that Terry was helping me with but fast forward to the present and I have my first in a series of how-to books just about ready to be published both digitally and in print form.

Index
http://www.autogeekonline.net/gallery/data/715/ebookmockupshot01.jpg


Digital Mock-up
Here's a mock-up of the rough draft on my iPad, this is a chapter on how to divide up the panels of a car into smaller sections for machine compounding and polishing.
http://www.autogeekonline.net/gallery/data/715/EbookMockup01.jpg


A few months later Terry Cook brought me to Southern California to buff out and prepare Scrape for the Monterey Auction where Scrape sold at the Monterey Auction in 1999 for a record.$275,000


While I was down there, I also did the wetsand, cut and buffed on one of Terry's other creations, The Titanic.

Hand Sanding the Liberace Lavender Paint on the Titanic
http://www.showcargarage.com/gallery/files/1/TitanicSanding004.jpg



When I arrived in Monterey, they had the Titanic set-up in the 3rd floor of a 4 floor parking garage and all I had for lighting were the overhead florescent tubes. Not what you would call an optimum setting for wetsanding a car that's 20 feet long with case-hardened clear coat paint.
http://www.showcargarage.com/gallery/files/1/TitanicSanding010.jpg


http://www.showcargarage.com/gallery/files/1/TitanicSanding0001.jpg

http://www.showcargarage.com/gallery/files/1/TitanicSanding005.jpg

http://www.showcargarage.com/gallery/files/1/TitanicSanding012.jpg



Back then we didn't have all the cool tools we have now for machine sanding nor the abrasive technology now available in aggressive cutting compounds. It's sure a lot easier to sand down paint and buff it out then it was back then.


Chip Foose & Christopher Titus
While I was prepping Scrape and The Titanic, I also met Chip Foose and Christopher Titus for the first time and ended up hanging out with them for most of the weekend as well as worked on Chip's creation, 0032 a 1932 Ford Roadster that one America's Most Beautiful Roadster Award in 2000

0032
http://www.autogeekonline.net/gallery/data/715/ChipFoose0032b.jpg


To my knowledge, both Scrape and 0032 are now in the Petersen Museum and I have not heard of or seen the Titanic since that weekend.


A Lincoln Zephyr on our TV Show
Also just to note, we had a gentleman by the name of Fred Datson on our TV show What's in the Garage? who build an all steel 1938 Lincoln Zephyr and then stuffed a 396 Big Block Chevy engine into it and this was his Daily Driver in Kingsport, Tennessee!


Here's a thread about this episode here on AutogeekOnline.net

Episode 4 - Kingsport, Tennessee (http://www.autogeekonline.net/forum/what-s-garage/34923-episode-4-kingsport-tennessee.html)
http://www.autogeekonline.net/gallery/data/1017/500_WTGLogo.jpg



Here's some pictures I took during the taping of the above episode, more pictures by clicking the link.

http://www.autogeekonline.net/gallery/data/1103/FredDatson001.jpg


http://www.autogeekonline.net/gallery/data/1103/FredDatson005.jpg


And if you click the link below you can watch Episode 4 with Fred and his Lincoln. Remember, we're shooting Season 2 of What's in the Garage? starting in January of 2012 and we're looking for cool cars to be on our TV show which we're going to shoot right here in Stuart, Florida at our own TV Studio.

Click here to watch Episode 4 of What's in the Garage? (http://www.mastersstorage.com/vault/aggarage1104.wmv)



Anyway, it was fun to see Franklin's 1939 Lincoln Zephyr and I'll see if I can get him to bring it by Autogeek's Show Car Garage sometime in the near future.


:xyxthumbs:

[Meghan]

My favorite, I love this car!

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub0932.jpg

And is that our very own BobbyB in the background?

http://www.autogeekonline.net/gallery/data/1256/GoldCoastCorvetteClub002.jpg