PDA

View Full Version : PB Wheel Sealant OR DP Wheel Glaze??



Pages : [1] 2

CaneCharger
08-28-2011, 07:37 PM
Any thoughts?

IOMCAMARO
08-28-2011, 07:46 PM
Save yourself some money. Just use the same sealant that you use on your paint.

batb
08-28-2011, 08:31 PM
Put some OC on and be done with it.

I had DP prior to the OC. It was OK.

00celica
08-28-2011, 08:42 PM
Poorboy's World Wheel Sealant for the durability.

poweraid
08-28-2011, 08:48 PM
neither , use a sealant and/or 845

tuscarora dave
08-28-2011, 08:49 PM
I use Collinite # 845 for wheels or UPGP or UTTG. I gave away nearly a quart of PB Wheel Sealant because I think that it doesn't last more than a week. I tried it on several cars and was disappointed every time.

FussMan
08-28-2011, 08:55 PM
Save yourself some money. Just use the same sealant that you use on your paint.

I completely agree :iagree:; if paint products (sealant/waxes) are good enought to protect your paint from the blazing hot sun ect ect, they are more than capable to protect your wheels.

I used Opti-Seal as my initial wheel coating followed by Optimum Spray Car Wax for maintenence. In fact, I read that Opti-Seal is great for exhause pipes...I am going to try that this week

Keep it simple :dblthumb2:

Fussman

WRAPT C5Z06
08-28-2011, 09:05 PM
Save yourself some money. Just use the same sealant that you use on your paint.
:iagree:

What a waste of money "wheel sealants" are, IMO.

Jenn1270
08-28-2011, 09:18 PM
I like opti-seal of 845 myself. I typically go for opti-seal because it is wowa and that saves 10 minutes of stress on my knees.

05xrunner
08-28-2011, 09:21 PM
I have both. i use Ultima trim and tire guard on my wheels. if I had to choose between those 2 though..it would be poorboys hands down. DP wheel glaze sucks. It is a PITA to remove..it leaves a BUNCH of white chalky residue behind. Poorboys wipes off as easy as fuzion and leaves no white powder.

CaneCharger
08-28-2011, 09:27 PM
I have been using UTTG. Maybe I should put powerlock or 845 on them...
Just didn't know if these wheel glazes are worth it...

Thanks for the feedback!

Jimmie
08-28-2011, 09:29 PM
yep, whatever you use on your paint.
I had to toss my wheel protection products also. No shelf life. One got a mold in it.
Now if they are chrome I used DG Aquawax, but I've heard don't coat chrome.

05xrunner
08-28-2011, 09:30 PM
if you already use UTTG on them dont bother using anything else..that stuff will last for a long time for protection

TroyScherer
08-28-2011, 09:39 PM
Cane, I have used Wheel wax. And I will say this. Save your money!!! Get some Opti-Seal or #845. I use Opti-Seal now as it is so easy to apply and last longer than Wheel wax. Also you don't have to remove any residue like you do with other waxes or sealants.

WRAPT C5Z06
08-28-2011, 10:13 PM
I have been using UTTG. Maybe I should put powerlock or 845 on them...
Just didn't know if these wheel glazes are worth it...

!
Are you not satisfied with UTTG?