PAR Detailing
08-22-2011, 08:24 PM
This client was a referral from another client of mine. The client wanted the exterior brought back to life and made as perfect as possible.
The paint wasn’t in horrible condition but it needed a little TLC to make the paint sparkle.
Products:
Megs G110
MF cutting disc w/ d300
M205 w/ orange Uber pad
Before:
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03003.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03004.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03005.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03006.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03007.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03011.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03012.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03015.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03017.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03018.jpg
Sanding marks from a repainted panel
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03024.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03026.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03029.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03035.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03057.jpg
The Prep:
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03044.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03045.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03046.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03047.jpg
A little tip I picked up from others more experienced from me. Prop the trunk open so you can work on it easier.
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03058.jpg
The one 50/50 I have. This is only after the compounding, the haze clears up after the second step.
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03066.jpg
When the license plate is flush with the paint it can scratch. I noticed that there was an outline around the license plate of scratches so I wanted to take a measure to fix this problem for the future. I took foam dots that have adhesive on one side and stuck them on the back before I placed the plate back on.
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03066.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03068.jpg
A lint roller works great on the fabric top to remove any fuzz
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03083.jpg
The paint wasn’t in horrible condition but it needed a little TLC to make the paint sparkle.
Products:
Megs G110
MF cutting disc w/ d300
M205 w/ orange Uber pad
Before:
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03003.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03004.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03005.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03006.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03007.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03011.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03012.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03015.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03017.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03018.jpg
Sanding marks from a repainted panel
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03024.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03026.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03029.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03035.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03057.jpg
The Prep:
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03044.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03045.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03046.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03047.jpg
A little tip I picked up from others more experienced from me. Prop the trunk open so you can work on it easier.
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03058.jpg
The one 50/50 I have. This is only after the compounding, the haze clears up after the second step.
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03066.jpg
When the license plate is flush with the paint it can scratch. I noticed that there was an outline around the license plate of scratches so I wanted to take a measure to fix this problem for the future. I took foam dots that have adhesive on one side and stuck them on the back before I placed the plate back on.
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03066.jpg
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03068.jpg
A lint roller works great on the fabric top to remove any fuzz
http://i1183.photobucket.com/albums/x465/PARDetailing/Accord/03%20Cobra/tn_MustangCobra03083.jpg