PDA

View Full Version : Constant Pressure Pads?


Rei86
07-29-2011, 12:38 PM
When is AutoGeek going to officially announce these pads? I heard when CMA went down you guys acquired BlackFire line and LC constant pressure pads. I've noticed that they've been on the site for sometime now

Lake Country Constant Pressure Technology 6.5 Inch CCS Pads, foam buffing pads (http://www.autogeek.net/constant-pressure-ccs-6-5-pads.html)
Lake Country Constant Pressure Technology 6.5 Inch Flat Pads, foam pads, buffing pads (http://www.autogeek.net/constant-pressure-flat-pads.html)
Lake Country Constant Pressure Technology 5.5 Inch Flat Pads, foam pads, buffing pads (http://www.autogeek.net/constant-pressure-flat-5-5-pads.html)

And can be added to my cart but you have to search for it as looking at the LC products doesn't have this item show up. So just wondering when this will become official.
Audi X2
07-29-2011, 01:01 PM
It does show these as "In-Stock" when adding to your cart
embolism
07-29-2011, 01:10 PM
great, I lasted 1.5 days without adding something to my cart

I'm assuming the extra piece of foam makes them slightly thicker than the 7/8 inch LC flat pads correct?
Rei86
07-29-2011, 01:15 PM
Yes, its also to allow even pressure no matter what surface you're on.

I wanna test these guys out just for the hell of it.
05xrunner
07-29-2011, 06:12 PM
wonder if these will make the Flex3401 a little less Grabby when you tilt it a little. If it helps even things out. Tempted to try some
Bunky
07-29-2011, 06:17 PM
I had tried some constant pressure white pads on a flex and did not really see much difference in behavior compared to any other pad. I had read CP pads were intended for rotary anyway.
qaz393
07-29-2011, 06:34 PM
stop thinking and start buying....... the top ones are gold, so they dont have the constant pressure thing...

http://img823.imageshack.us/img823/7816/dsc08698x.jpg
qaz393
07-29-2011, 06:44 PM
great, I lasted 1.5 days without adding something to my cart

I'm assuming the extra piece of foam makes them slightly thicker than the 7/8 inch LC flat pads correct?

they are slightly thinner than the regular 1 1/4inch thick pads. much thicker than 7/8th inch pads
qaz393
07-29-2011, 06:46 PM
all my information given was based off CMA constant pressure pads. i assume they will be 100% identical since AG bought out blackfire and maybe some otherstuff CMA was selling....
qaz393
07-29-2011, 07:05 PM
no red no gold pads???? (5.5)
TID10
07-29-2011, 10:42 PM
Outstanding. I really liked these pads and was bummed with pac went bye bye. All is well.
qaz393
07-29-2011, 10:43 PM
no TID no care, TID has some really good article that should be posted here in case their website goes.....